In order to measure the position and orientation of in-vivo medical micro-devices without the line-of- sight constraints, a wireless magnetic sensor is developed for an electromagnetic localization method. In the elec...In order to measure the position and orientation of in-vivo medical micro-devices without the line-of- sight constraints, a wireless magnetic sensor is developed for an electromagnetic localization method. In the electromagnetic localization system, the wireless magnetic sensor is embedded in the micro-devices to measure alternating magnetic signals. The wireless magnetic sensor is composed of an induction coil, a signal processor, a radio frequency （R.F） transmitter, a power manager and batteries. Based on the principle of electromagnetic induction, the induction coil converts the alternating magnetic signals into electrical signals. Via the RF transmitter, the useful data am wirelessly sent outside the body. According to the relation between the magnetic signals and the location, the position and orientation of the micro-devices can be calculated. The experiments demonstrate the feasibility of localizing in-vivo medical micro-devices with the wireless magnetic sensor. The novel localization system is accurate and robust.展开更多
The micro-turbine is known as a producer of high-grade energy （work） and also low energy （heat）. The following low grade heat energy have been modeled under ISO ambient conditions （international standard organiza...The micro-turbine is known as a producer of high-grade energy （work） and also low energy （heat）. The following low grade heat energy have been modeled under ISO ambient conditions （international standard organization）, i.e. 15 ℃ and 1 bar, to utilize the waste heat energy of a 200 kW micro-turbine combined with a single effect absorption chiller, an organic ranking cycle using R245fa （ORC-R245 fa） as a working fluid, a multi-effect distillation desalination （MED） and a thermal vapor compression MED Desalination unit （TVC-MED）. The thermal comparison was carried out based on an energy and exergy analysis in terms of electric efficiency, exergetic efficiency, carbon footprint, and energy utilization factor （EUF）. The software package IPSEpro has been used to model and simulate the proposed power plants. As a result, utilizing the exhaust waste heat energy in single-effect absorption chillier has contributed to stabilize ambient temperature fluctuation, and gain the best exergetic efficiency of 39%, while the EUF has reached 72% and the carbon footprint was reduced by 75% in MED and TVC-MED Desalination respectively. The results also reveal that TVC-MED is more efficient than traditional MED as its gain output ratio （GOR） is improved by 5.5%. In addition, ORC-245fa generates an additional 20% of the micro-turbine electricity generation.展开更多
基金Sup.ported by the High TechnologyResearch and Development Programme of China （No.2006AA04Z368）, the National Natural Science Foundation of China （No. 30900320, 30570485） and Innovation Program of Shanghai Municipal Education Commission （No. 10YZ93）.
文摘In order to measure the position and orientation of in-vivo medical micro-devices without the line-of- sight constraints, a wireless magnetic sensor is developed for an electromagnetic localization method. In the electromagnetic localization system, the wireless magnetic sensor is embedded in the micro-devices to measure alternating magnetic signals. The wireless magnetic sensor is composed of an induction coil, a signal processor, a radio frequency （R.F） transmitter, a power manager and batteries. Based on the principle of electromagnetic induction, the induction coil converts the alternating magnetic signals into electrical signals. Via the RF transmitter, the useful data am wirelessly sent outside the body. According to the relation between the magnetic signals and the location, the position and orientation of the micro-devices can be calculated. The experiments demonstrate the feasibility of localizing in-vivo medical micro-devices with the wireless magnetic sensor. The novel localization system is accurate and robust.
文摘The micro-turbine is known as a producer of high-grade energy （work） and also low energy （heat）. The following low grade heat energy have been modeled under ISO ambient conditions （international standard organization）, i.e. 15 ℃ and 1 bar, to utilize the waste heat energy of a 200 kW micro-turbine combined with a single effect absorption chiller, an organic ranking cycle using R245fa （ORC-R245 fa） as a working fluid, a multi-effect distillation desalination （MED） and a thermal vapor compression MED Desalination unit （TVC-MED）. The thermal comparison was carried out based on an energy and exergy analysis in terms of electric efficiency, exergetic efficiency, carbon footprint, and energy utilization factor （EUF）. The software package IPSEpro has been used to model and simulate the proposed power plants. As a result, utilizing the exhaust waste heat energy in single-effect absorption chillier has contributed to stabilize ambient temperature fluctuation, and gain the best exergetic efficiency of 39%, while the EUF has reached 72% and the carbon footprint was reduced by 75% in MED and TVC-MED Desalination respectively. The results also reveal that TVC-MED is more efficient than traditional MED as its gain output ratio （GOR） is improved by 5.5%. In addition, ORC-245fa generates an additional 20% of the micro-turbine electricity generation.
