微处理器电压调节器瞬态响应特性的改善

为设计具有快速动态响应的微处理器电源电压调节器,分析了在负载突变时电压调节器的瞬态响应特性和电路器件参数对输出电压瞬态响应影响.分析表明,采用合适电容值的低等效寄生电阻的滤波电容,并提高开关频率,可减小输出电压跌落.仿真结果显示,电感减半使电压跌落减小约20%,响应时间减小约60%;取临界(优化的)电容值可使电压波动减小约40%,但延长了响应时间;电流型控制方法比电压型控制方法电压跌落减小了约20%,响应时间缩短70%以上.

新型CPU及微处理器低压大电流可编程输出电源设计

为了解决CPU供电电源系统要求输出精度高、电压较低而输出电流较大等特性,给出了采用飞兆半导体公司的同步PWM控制芯片设计低压大电流CPU主供电电源电路的方法。由于该电源系统同时具有输出电压可编程功能,因而能够满足CPU和高性能微处理器系统电源输出电压精度高、电流大等要求。

An accurate calculation method of the power harmonic parameters based on the delay time theorem of Fourier transform

A new accurate calculation method of electric power harmonic parameters was presented. Based on the delay time theorem of Fourier transform, the frequency of the electric power was calculated, and then, suing interpolation in the frequency domain of the windows, the parameters （amplitude and phase） of each harmonic frequency signals were calculated accurately. In the paper, the effect of the delay time and the windows on the electric power harmonic calculation accuracy was analysed. The digital simulation and the physical measurement tests show that the proposed method is effective and has more advantages than other methods which are based on multipoint interpolation especially in calculation time cost; therefore, it is very suitable to be used in the single chip DSP micro-processor.