The reduction mechanism of Ir in the NaCl-KCl-IrCl3 molten salt was investigated by cyclic voltammetry and chronopotentiometry, and Ir film was deposited effectively on platinum in potentiostatic mode. The morphology ...The reduction mechanism of Ir in the NaCl-KCl-IrCl3 molten salt was investigated by cyclic voltammetry and chronopotentiometry, and Ir film was deposited effectively on platinum in potentiostatic mode. The morphology and constitution of Ir film were examined by scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS） and X-ray diffraction （XRD）. It is found that the reduction mechanism of Ir（III） is a three-electron step and electro reaction is a reversible diffusion controlled process; the diffusion coefficients of Ir（III） at 1083, 1113, 1143 and 1183 K are 1.56×10-4, 2.23×10-4, 2.77×10-4 and 4.40×10-4 cm2/s, respectively, while the activation energy of the electrode reaction is 102.95 kJ/mol. The compacted Ir film reveals that the applied potential greatly affects the deposition of Ir, the thickness of Ir film deposited at the potential of reduction peak is the highest, the temperature of the molten salt also exerts an influence on deposition, the film formed at a lower temperature is thinner, but more micropores would occur on film when the temperature went too high.展开更多
We report the preparation of porous CuO nanowires that are composed of nanoparticles （-50 nm） via a simple decomposition of a Cu（OH）2 precursor and their application as the anode materials of rechargeable Na-ion b...We report the preparation of porous CuO nanowires that are composed of nanoparticles （-50 nm） via a simple decomposition of a Cu（OH）2 precursor and their application as the anode materials of rechargeable Na-ion batteries. The as-prepared porous CuO nanowires exhibit a Brunauer-Emmett-Teller （BET） surface area of 13.05 m^2.g^-1, which is six times larger than that of bulk CuO （2.16 m^2.g^-1）. The anode of porous CuO nanowires showed discharge capacities of 640 mA.h.g^-1 in the first cycle and 303 mA.h.g^-1 after 50 cycles at 50 mA.g^-1 The high capacity is attributed to porous nanostructure which facilitates fast Na-intercalation kinetics. The mechanism of electrochemical Na-storage based on conversion reactions has been studied through cyclic voltammetry, X-ray diffraction （XRD）, Raman spectroscopy, and high resolution transmission electron microscopy （HRTEM）. It is demonstrated that in the discharge process, Na＋ions first insert into CuO to form a CuⅡ1-x CuⅠ x O1-x/2solid and a Na2O matrix then CuⅡ1-xCu Ⅰ xO1-x/2 reacts with Na＋ to produce Cu2O, and finally Cu2O decompose into Cu nanoparticles enclosed in a Na2O matrix. During the charge process, Cu nanopartides are first oxidized to generate Cu2O and then converted back to CuO. This result contributes to the design and mechanistic analysis of high-performance anodes for rechargeable Na-ion batteries.展开更多
Being simple, inexpensive, scalable and environmentally friendly, microporous biomass biochars have been attracting enthusiastic attention for application in lithium-sulfur （Li-S） batteries. Herein, porous bamboo bi...Being simple, inexpensive, scalable and environmentally friendly, microporous biomass biochars have been attracting enthusiastic attention for application in lithium-sulfur （Li-S） batteries. Herein, porous bamboo biochar is activated via a KOH/annealing process that creates a microporous structure, boosts surface area and enhances electronic conductivity. The treated sample is used to encapsulate sulfur to prepare a microporous bamboo carbon-sulfur （BC-S） nanocomposite for use as the cathode for Li-S batteries for the first time. The BC-S nanocomposite with 50 wt.% sulfur content delivers a high initial capacity of 1,295 mA-h/g at a low discharge rate of 160 mA/g and high capacity retention of 550 mA-h/g after 150 cycles at a high discharge rate of 800 mA/g with excellent coulombic efficiency （995%）. This suggests that the BC-S nanocomposite could be a promising cathode material for Li-S batteries.展开更多
文摘The reduction mechanism of Ir in the NaCl-KCl-IrCl3 molten salt was investigated by cyclic voltammetry and chronopotentiometry, and Ir film was deposited effectively on platinum in potentiostatic mode. The morphology and constitution of Ir film were examined by scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS） and X-ray diffraction （XRD）. It is found that the reduction mechanism of Ir（III） is a three-electron step and electro reaction is a reversible diffusion controlled process; the diffusion coefficients of Ir（III） at 1083, 1113, 1143 and 1183 K are 1.56×10-4, 2.23×10-4, 2.77×10-4 and 4.40×10-4 cm2/s, respectively, while the activation energy of the electrode reaction is 102.95 kJ/mol. The compacted Ir film reveals that the applied potential greatly affects the deposition of Ir, the thickness of Ir film deposited at the potential of reduction peak is the highest, the temperature of the molten salt also exerts an influence on deposition, the film formed at a lower temperature is thinner, but more micropores would occur on film when the temperature went too high.
基金This work was supported by the National Basic Rese- arch Program of China （973 Program） （2011CB935900）, the National Natural Science Foundation of China （NSFC） （51231003 and 21322101）, the National ＂111＂ Project of China＇s Higher Education （B12015）, and the Tianjin High-Tech Project （12ZCZDJC35300）.
文摘We report the preparation of porous CuO nanowires that are composed of nanoparticles （-50 nm） via a simple decomposition of a Cu（OH）2 precursor and their application as the anode materials of rechargeable Na-ion batteries. The as-prepared porous CuO nanowires exhibit a Brunauer-Emmett-Teller （BET） surface area of 13.05 m^2.g^-1, which is six times larger than that of bulk CuO （2.16 m^2.g^-1）. The anode of porous CuO nanowires showed discharge capacities of 640 mA.h.g^-1 in the first cycle and 303 mA.h.g^-1 after 50 cycles at 50 mA.g^-1 The high capacity is attributed to porous nanostructure which facilitates fast Na-intercalation kinetics. The mechanism of electrochemical Na-storage based on conversion reactions has been studied through cyclic voltammetry, X-ray diffraction （XRD）, Raman spectroscopy, and high resolution transmission electron microscopy （HRTEM）. It is demonstrated that in the discharge process, Na＋ions first insert into CuO to form a CuⅡ1-x CuⅠ x O1-x/2solid and a Na2O matrix then CuⅡ1-xCu Ⅰ xO1-x/2 reacts with Na＋ to produce Cu2O, and finally Cu2O decompose into Cu nanoparticles enclosed in a Na2O matrix. During the charge process, Cu nanopartides are first oxidized to generate Cu2O and then converted back to CuO. This result contributes to the design and mechanistic analysis of high-performance anodes for rechargeable Na-ion batteries.
文摘Being simple, inexpensive, scalable and environmentally friendly, microporous biomass biochars have been attracting enthusiastic attention for application in lithium-sulfur （Li-S） batteries. Herein, porous bamboo biochar is activated via a KOH/annealing process that creates a microporous structure, boosts surface area and enhances electronic conductivity. The treated sample is used to encapsulate sulfur to prepare a microporous bamboo carbon-sulfur （BC-S） nanocomposite for use as the cathode for Li-S batteries for the first time. The BC-S nanocomposite with 50 wt.% sulfur content delivers a high initial capacity of 1,295 mA-h/g at a low discharge rate of 160 mA/g and high capacity retention of 550 mA-h/g after 150 cycles at a high discharge rate of 800 mA/g with excellent coulombic efficiency （995%）. This suggests that the BC-S nanocomposite could be a promising cathode material for Li-S batteries.
