Two kinds of nickel particles with flower-like struc~＇es assembled with a number of nano-flakes were synthesized and the relationship of their morphology and microwave absorbing properties was studied. The electromag...Two kinds of nickel particles with flower-like struc~＇es assembled with a number of nano-flakes were synthesized and the relationship of their morphology and microwave absorbing properties was studied. The electromagnetic parameters of these flower-like Ni were measured with vector network analyzer at 2-18 GHz frequency and the reflection losses （RL） with different sample thicknesses were calculated. The results indicate that the flower-like nickel-wax composites with the sample thickness less than 2 mm show excellent absorbing ability. This result is expected to play a guiding role in the preparation of the highly efficient absorber.展开更多
An atomic layer deposition （ALD） method has been employed to synthesize Fe3O4/graphene and Ni/graphene composites. The structure and microwave absorbing properties of the as-prepared composites are investigated. The...An atomic layer deposition （ALD） method has been employed to synthesize Fe3O4/graphene and Ni/graphene composites. The structure and microwave absorbing properties of the as-prepared composites are investigated. The surfaces of graphene are densely covered by Fe3O4 or Ni nanoparticles with a narrow size distribution, and the magnetic nanoparticles are well distributed on each graphene sheet without significant conglomeration or large vacancies. The coated graphene materials exhibit remarkably improved electromagnetic （EM） absorption properties compared to the pristine graphene. The optimal reflection loss （RL） reaches -46.4 dB at 15.6 GHz with a thickness of only 1.4 mm for the Fe3O4/graphene composites obtained by applying 100 cycles of Fe2O3 deposition followed by a hydrogen reduction. The enhanced absorption ability arises from the effective impedance matching, multiple interfacial polarization and increased magnetic loss from the added magnetic constituents. Moreover, compared with other recently reported materials, the composites have a lower filling ratio and smaller coating thickness resulting in significantly increased EM absorption properties. This demonstrates that nanoscale surface modification of magnetic particles on graphene by ALD is a very promising way to design lightweight and high-efficiency microwave absorbers.展开更多
Ni1-xZnxFe2O4(0≤x≤1,in steps of 0.1) nanocrystallines were synthesized by sol-gel route.The doping effects of zinc on structural,magnetic and microwave absorption properties were investigated in detail.X-ray diffrac...Ni1-xZnxFe2O4(0≤x≤1,in steps of 0.1) nanocrystallines were synthesized by sol-gel route.The doping effects of zinc on structural,magnetic and microwave absorption properties were investigated in detail.X-ray diffraction(XRD) results show that all the samples are single-phase spinel structure.The magnetic and microwave absorption properties are strongly dependent on the zinc content,which can be understood in terms of the cations redistribution in spinel tetrahedral and octahedral sites with the increase of zinc content.The magnetic measurement shows the antiferromagnetic nature of the samples for x=0.9 and x=1.0.The saturation magnetization reaches the maximum of 3.35μB/f.u.at x=0.5.The optimal reflection loss(RL) of-29.6 dB is found at 6.5 GHz for an absorber thickness of 5 mm.The RL values exceeding 10 dB are obtained for the absorber in the range of 3.9-8.9 GHz.These Ni1-xZnxFe2O4 nanocrystallines may be attractive candidates for electromagnetic wave absorption materials.展开更多
Co0.6Cu0.16Ni0.24Fe2O4/multi-walled carbon nanotube nanocomposites (CCNF/MWCNTs) were synthesized by solution filling method.The phase structure,thermal stability,morphology and electrical-magnetic properties of the s...Co0.6Cu0.16Ni0.24Fe2O4/multi-walled carbon nanotube nanocomposites (CCNF/MWCNTs) were synthesized by solution filling method.The phase structure,thermal stability,morphology and electrical-magnetic properties of the samples were characterized by means of modern testing technology.The effect of iron concentration,filling time,sintering temperature on their electrical and magnetic performance was discussed.The results indicated that conductivity was related to the content of MWCNTs,while the magnetism correlated with the volume fraction of the filled CCNF in the composites.When the optimal condition satisfied the filling time of 18 h,ferric concentration of 0.25 mol L-1 and sintering temperature of 350°C,the prepared composite had the best magnetic loss performance,and its minimum reflection loss reached-22.47 dB on 9.76 GHz,the available bandwidth was beyond 2.0 GHz.Hence,the obtained composite can be used as advancing absorption and shielding material due to its favorable microwave absorbing property.展开更多
基金Project(JC201006020838A)supported by the Basic Research Funds of Science and Technology Foundation of Shenzhen,China
文摘Two kinds of nickel particles with flower-like struc~＇es assembled with a number of nano-flakes were synthesized and the relationship of their morphology and microwave absorbing properties was studied. The electromagnetic parameters of these flower-like Ni were measured with vector network analyzer at 2-18 GHz frequency and the reflection losses （RL） with different sample thicknesses were calculated. The results indicate that the flower-like nickel-wax composites with the sample thickness less than 2 mm show excellent absorbing ability. This result is expected to play a guiding role in the preparation of the highly efficient absorber.
文摘An atomic layer deposition （ALD） method has been employed to synthesize Fe3O4/graphene and Ni/graphene composites. The structure and microwave absorbing properties of the as-prepared composites are investigated. The surfaces of graphene are densely covered by Fe3O4 or Ni nanoparticles with a narrow size distribution, and the magnetic nanoparticles are well distributed on each graphene sheet without significant conglomeration or large vacancies. The coated graphene materials exhibit remarkably improved electromagnetic （EM） absorption properties compared to the pristine graphene. The optimal reflection loss （RL） reaches -46.4 dB at 15.6 GHz with a thickness of only 1.4 mm for the Fe3O4/graphene composites obtained by applying 100 cycles of Fe2O3 deposition followed by a hydrogen reduction. The enhanced absorption ability arises from the effective impedance matching, multiple interfacial polarization and increased magnetic loss from the added magnetic constituents. Moreover, compared with other recently reported materials, the composites have a lower filling ratio and smaller coating thickness resulting in significantly increased EM absorption properties. This demonstrates that nanoscale surface modification of magnetic particles on graphene by ALD is a very promising way to design lightweight and high-efficiency microwave absorbers.
基金supported by the National Natural Science Foundation of China (Grant Nos.10874051,51002156,and 11104098)the Natural Science Major Foundation of Anhui Provincial Higher Education Institutions of China (Grant No. KJ2012ZD14)
文摘Ni1-xZnxFe2O4(0≤x≤1,in steps of 0.1) nanocrystallines were synthesized by sol-gel route.The doping effects of zinc on structural,magnetic and microwave absorption properties were investigated in detail.X-ray diffraction(XRD) results show that all the samples are single-phase spinel structure.The magnetic and microwave absorption properties are strongly dependent on the zinc content,which can be understood in terms of the cations redistribution in spinel tetrahedral and octahedral sites with the increase of zinc content.The magnetic measurement shows the antiferromagnetic nature of the samples for x=0.9 and x=1.0.The saturation magnetization reaches the maximum of 3.35μB/f.u.at x=0.5.The optimal reflection loss(RL) of-29.6 dB is found at 6.5 GHz for an absorber thickness of 5 mm.The RL values exceeding 10 dB are obtained for the absorber in the range of 3.9-8.9 GHz.These Ni1-xZnxFe2O4 nanocrystallines may be attractive candidates for electromagnetic wave absorption materials.
基金supported by the National Natural Science Foundation of China (Grant No. 21071125)the Science and Technology Key Project of Zhejiang Province (Grant No. 2010C11053)the subproject of Science-Technology Innovation Team in Zhejiang Province (Grant No.2011R09006-06)
文摘Co0.6Cu0.16Ni0.24Fe2O4/multi-walled carbon nanotube nanocomposites (CCNF/MWCNTs) were synthesized by solution filling method.The phase structure,thermal stability,morphology and electrical-magnetic properties of the samples were characterized by means of modern testing technology.The effect of iron concentration,filling time,sintering temperature on their electrical and magnetic performance was discussed.The results indicated that conductivity was related to the content of MWCNTs,while the magnetism correlated with the volume fraction of the filled CCNF in the composites.When the optimal condition satisfied the filling time of 18 h,ferric concentration of 0.25 mol L-1 and sintering temperature of 350°C,the prepared composite had the best magnetic loss performance,and its minimum reflection loss reached-22.47 dB on 9.76 GHz,the available bandwidth was beyond 2.0 GHz.Hence,the obtained composite can be used as advancing absorption and shielding material due to its favorable microwave absorbing property.
