The characteristics of the zeolite modified by microwave and sodium acetate and its sorption of ammonia-nitrogen from simulated water sample were investigated.The results show that the modified zeolite by microwave-so...The characteristics of the zeolite modified by microwave and sodium acetate and its sorption of ammonia-nitrogen from simulated water sample were investigated.The results show that the modified zeolite by microwave-sodium acetate(SMMZ)has a high sorption efficiency and removal performance.The ammonia-nitrogen removal rate of SMMZ reaches 92.90%.The surface of SMMZ becomes loose and some pores appear,the specific surface area,total pore volume and average pore diameter increase after modification.Compared to the natural zeolite,SMMZ has a more concentrated pore size distribution in the range of 0-10 nm.The cation exchange capacity(CEC)of SMMZ is higher than that of the natural zeolite.And the ammonia nitrogen removal rate is consistent with the change of CEC.The SMMZ possesses rapid sorption and slow balance characteristics and ammonia-nitrogen sorption is consistent with both Langmuir adsorption isotherm model and Freundlich adsorption isotherm model.The adsorption kinetics of ammonia-nitrogen follows the pseudo-second order kinetic model.展开更多
Polyaspartic acid(PASP)is suitable for the inhibition of scale deposition from water.To enhance its in- hibition efficiency,PASP was modified by reacting aspartic acid(Asp)with glutamic acid(Glu)to provide Asp-Glu cop...Polyaspartic acid(PASP)is suitable for the inhibition of scale deposition from water.To enhance its in- hibition efficiency,PASP was modified by reacting aspartic acid(Asp)with glutamic acid(Glu)to provide Asp-Glu copolymer under microwave irradiation.The influence of reaction parameters on conversion,molecular weight and inhibition of CaCO3 precipitation was investigated Infra-red.(IR), 1H nuclear magnetic resonance( 1H NMR)and 13C nuclear magnetic resonance( 13C NMR)spectroscopies were used to characterize the copolymer.The results show that copolymerization of aspartic acid and glutamic acid is catalyzed by a small amount of phosphorous acid (H3PO4)in solvent,the product conversion is 98.05%under the following conditions:the molar ratio of glutamic acid to reactant[Glu/(Asp+Glu)]is 0.3 and that of catalyst(Cat)to reactant[Cat/(Glu+Asp)]is 0.05(0.65ml H3PO4),the volume of solvent dimethylformamide is 16ml,the microwave power used is 720W and the reaction for 3 min.The weight average molecular weight of copolymer synthesized under these conditions is 2709 and the inhi- bition rate for CaCO3 is 97.75%.展开更多
Most Zn hydrometallurgy factories adopt Cu2SO4 as a dechlorination reagent from zinc solution nowadays, thus much CuCl residue is produced. The existing process of treating this residue is washing with water or sodium...Most Zn hydrometallurgy factories adopt Cu2SO4 as a dechlorination reagent from zinc solution nowadays, thus much CuCl residue is produced. The existing process of treating this residue is washing with water or sodium carbonate solution, which would cause a lot of troubles to water treatment and waste discharge. A method of microwave roasting was adopted for dechlorination of CuCl residue. A 1.5 kW microwave roasting equipment with dust collection and tail gas adsorption systems was set up and applied during the experiment. By investigating the effect of temperature, heat preservation time, moisture content of raw material and grain size of samples on the dechlorination, the optimal experimental condition is obtained. When the samples with 2% moisture and <150 μm grain size are microwave roasted at 400 °C for 2 h, the Cl content turns from 14.27% to 1.35% and the dechlorination rate is as high as 90%, while that with conventional heating is only 60%-80%. The phase change of the roasting process investigated with X-ray diffraction verifies that CuCl in CuCl residue is removed by being transformed into CuO.展开更多
基金Project(51174017) supported by the National Natural Science Foundation of China
文摘The characteristics of the zeolite modified by microwave and sodium acetate and its sorption of ammonia-nitrogen from simulated water sample were investigated.The results show that the modified zeolite by microwave-sodium acetate(SMMZ)has a high sorption efficiency and removal performance.The ammonia-nitrogen removal rate of SMMZ reaches 92.90%.The surface of SMMZ becomes loose and some pores appear,the specific surface area,total pore volume and average pore diameter increase after modification.Compared to the natural zeolite,SMMZ has a more concentrated pore size distribution in the range of 0-10 nm.The cation exchange capacity(CEC)of SMMZ is higher than that of the natural zeolite.And the ammonia nitrogen removal rate is consistent with the change of CEC.The SMMZ possesses rapid sorption and slow balance characteristics and ammonia-nitrogen sorption is consistent with both Langmuir adsorption isotherm model and Freundlich adsorption isotherm model.The adsorption kinetics of ammonia-nitrogen follows the pseudo-second order kinetic model.
基金Supported by Harbin Key Technologies R&D Program(No.2003AA4CS123).
文摘Polyaspartic acid(PASP)is suitable for the inhibition of scale deposition from water.To enhance its in- hibition efficiency,PASP was modified by reacting aspartic acid(Asp)with glutamic acid(Glu)to provide Asp-Glu copolymer under microwave irradiation.The influence of reaction parameters on conversion,molecular weight and inhibition of CaCO3 precipitation was investigated Infra-red.(IR), 1H nuclear magnetic resonance( 1H NMR)and 13C nuclear magnetic resonance( 13C NMR)spectroscopies were used to characterize the copolymer.The results show that copolymerization of aspartic acid and glutamic acid is catalyzed by a small amount of phosphorous acid (H3PO4)in solvent,the product conversion is 98.05%under the following conditions:the molar ratio of glutamic acid to reactant[Glu/(Asp+Glu)]is 0.3 and that of catalyst(Cat)to reactant[Cat/(Glu+Asp)]is 0.05(0.65ml H3PO4),the volume of solvent dimethylformamide is 16ml,the microwave power used is 720W and the reaction for 3 min.The weight average molecular weight of copolymer synthesized under these conditions is 2709 and the inhi- bition rate for CaCO3 is 97.75%.
基金Project(51104073)supported by the National Natural Science Foundation of China
文摘Most Zn hydrometallurgy factories adopt Cu2SO4 as a dechlorination reagent from zinc solution nowadays, thus much CuCl residue is produced. The existing process of treating this residue is washing with water or sodium carbonate solution, which would cause a lot of troubles to water treatment and waste discharge. A method of microwave roasting was adopted for dechlorination of CuCl residue. A 1.5 kW microwave roasting equipment with dust collection and tail gas adsorption systems was set up and applied during the experiment. By investigating the effect of temperature, heat preservation time, moisture content of raw material and grain size of samples on the dechlorination, the optimal experimental condition is obtained. When the samples with 2% moisture and <150 μm grain size are microwave roasted at 400 °C for 2 h, the Cl content turns from 14.27% to 1.35% and the dechlorination rate is as high as 90%, while that with conventional heating is only 60%-80%. The phase change of the roasting process investigated with X-ray diffraction verifies that CuCl in CuCl residue is removed by being transformed into CuO.
