微电子分析方法在孔隙演化研究中的应用——以松辽盆地北部深部储层为例

本研究在广泛的岩石薄片研究的基础上,选择了50多个样品分别进行了阴极发光、扫描电镜和电子探针分析,取得了十分有意义的资料。文中运用各种成果数据对砂岩成岩作用及其与孔隙演化的关系进行了探讨。

国家微分析中心

国家微电子材料与元器件微分析中心(简称:国家微分析中心)是复旦大学材料科学系主要的科研机构之一,1991年由国家计委立项成立.国家微分析中心长期以来从事微电子领域的微分析工作,承担并完成了"八五"和"九五"期间国家计委"微分析技术及其应用"等重大攻关任务,为我国特别是上海的微电子产业发展做出了卓越的贡献.

开放式专业实验教学模式探索和实践

在研究型教学理论的指导下，为了进行开放式专业实验教学模式的探索，在“微电子器件参数的测试与分析”专业实验课程中进行了开放式实验教学模式的新尝试，在实验教学内容、实验过程、实验室管理、实验成绩考核评定方式上实现了全方位的开放。教学实践表明，全方位开放的专业实验教学模式，更利于因材施教，培养综合素质强、具有强烈创新意识、适应社会和行业的专业人才。

Process mineralogy and characteristic associations of iron and phosphorus-based minerals on oolitic hematite

The chemical compositions,mineralogical characteristics,as well as dissemination of iron-and phosphorus-based minerals were studied for the E’xi oolitic hematite from western Hubei Province in China by using chemical analysis,optical microscope,electron probe micro-analyzer(EPMA)and energy dispersive spectroscopy(EDS).It is found that this kind of oolitic hematite ore contains 47.71%TFe,10.96%SiO_2,as well as 0.874%P,with hematite as the dominant Fe-bearing minerals,and quartz,chamosite,illite and cellophane as main gangue minerals.The microscope examination showed that the ore has an oolitic structure,with some ooids principally formed by a series of concentric layers of hematite collophanite around nucleus that is hematite in the association with collophanite.Based on the EPMA and EDS analysis,it can be known that some ooids are primarily composed of hematite and collophanite.The separation can be achieved through fine grinding for those collophanite laminae with a higher P content.However,the dissemination of two minerals at the interface will result in the difficulty in effective separation.Besides,some ooids are made of chamosite with some nucleus formed of quartz,which is principally finely disseminated with hematite.In view of the close association and dissemination of iron-and phosphorus-based minerals in the ooids,it is found that the process of stage-grindings and stage-separations can be adopted to effectively increase the iron recovery and decrease the P content in the concentrate to some extent.

A simple plasma reduction for synthesis of Au and Pd nanoparticles at room temperature

A simple and fast plasma reduction method is developed for synthesis of Au and Pd metal nanoparticles. The scanning electron microscopy(SEM) analysis indicates a formation of aggregates of Au and Pd nanoparticles with branched structure. The transmission electron microscopy(TEM) image shows that the inclusive nanoparticles are all about 5 nm in size. Compared to conventional hydrogen reduction method, plasma method inhibits the agglomeration of metal particles. The room temperature operation is very helpful to limit the nanoparticle size. Most interestingly, plasma reduction produces more flattened metal particles. This plasma reduction does not require the use of any hazardous reducing chemicals, showing the great potential for the fabrication of noble metal nanoparticles.

Electrodeposition Behavior of Nickel from a Low Temperature Urea-molten Salt

The electrodeposition behavior of nickel at glassy carbon(GC)and stainless steel(SS)electrodes in low temperature urea-acetamide-NaBr-KBr melt was investigated using cyclic voltammetry,chrono-amperometric current-time transients and scanning electron microscopy.Cyclic voltammograms and dimensionless chronoamperometric current-time transients analysis show that the electrodeposition of nickel is an irreversible process and proceeds via three-dimensional progressive nucleation with diffusion-controlled growth on both GC and SS substrates.Scanning electron microscopic analysis indicates the nickel deposits obtained on SS electrode are generally uniform,dense,and adherent to the substrate with rounded crystallites in the nanometer size regime.It is also found that the crystal structure of the electrodeposited nickel is independent on the deposition potential.The nickel deposits produced from the melt at higher cathodic potential exhibit larger grain size.

Simultaneous removal of nitrogen and phosphorus from swine wastewater in a sequencing batch biofilm reactor

In this study, the performance of a sequencing batch biofilm reactor(SBBR) for removal of nitrogen and phosphorus from swine wastewater was evaluated. The replacement rate of wastewater was set at 12.5% throughout the experiment. The anaerobic and aerobic times were 3 h and 7 h, respectively, and the dissolved oxygen concentration of the aerobic phase was about 3.95 mg·L-1. The SBBR process demonstrated good performance in treating swine wastewater. The percentage removal of total chemical oxygen demand(COD), ammonia nitrogen(NH4+-N), total nitrogen(TN), and total phosphorus(TP) was 98.2%, 95.7%, 95.6%, and 96.2% at effluent concentrations of COD85.6 mg·L-1, NH4+-N 35.22 mg·L-1, TN 44.64 mg·L-1, and TP 1.13 mg·L-1, respectively. Simultaneous nitrification and denitrification phenomenon was observed. Further improvement in removal efficiency of NH4+-N and TN occurred at COD/TN ratio of 11:1, with effluent concentrations at NH4+-N 18.5 mg·L-1and TN 34 mg·L-1, while no such improvement in COD and TP removal was found. Microbial electron microscopy analysis showed that the filler surface was covered with a thick biofilm, forming an anaerobic–aerobic microenvironment and facilitating the removal of nitrogen, phosphorus and organic matters. A long-term experiment(15 weeks) showed that stable removal efficiency for N and P could be achieved in the SBBR system.

Analysis of microscopic pore structures of rocks before and after water absorption

Hydrophilic characteristics of rocks are affected by their microscopic pore structures,which clearly change after water absorption.Water absorption tests and scanning electron microscopic（SEM） experiments on rock samples,located at a site in Tibet,China,were carried out Changes of rock pore structures before and after water absorption were studied with the distribution of pore sizes and fractal characteristics of pores.The results show that surface porosities,fractal dimensions of pores and the complexity of pore structures increased because the number of new small pores produced increased or the original macropore flow channels were expanded after rocks absorbed water.There were points of inflection on their water absorption curves.After water absorption of other rocks,surface porosities and fractal dimensions of pores and complexity of pore structures decreased as the original pore flow channels became filled.Water absorption curves did not change.Surface porosity and the pore fractal dimensions of rocks have good linear relationships before and after water absorption.

Characteristics and mechanism of low permeability beach-bar sandstone reservoir of Es4 in Dongying sag

Core and cast sections observation and description,and logging,scanning electron microscope and core lab analysis data etc. were applied to the present research of the characteristics and mechanism of low permeability beach-bar sandstone reservoir of Es4 in Dongying sag. The results indicated the reservoir has the characteristics of middle-low pores,low-permeability,low compositional and structural maturity,and thin throat. The low-permeability is mainly due to sedimentation (fine particles and argillaceous inter beds) and diagenesis (compaction,cementation,and dissolution). The cementation reduced the physical property of the reservoir mainly by carbonate cementation,quartz autogeny and enragement,and autogeny clay. Clay minerals usually jam the pores by filling holes,close-fitting the wall of hole,bridging,wrapping grains,and separate attaching the pores and so on. The dissolution is insufficient so as not to improve the porosity and permeability of the reservoir obviously. So it is also an important factor of forming low-permeability reservoir.

Effects of low-intensity pulsed ultrasound stimulation on porous hydroxyapatite blocks for posterolateral fusion of lumbar spine in rabbits

he effects of porous hydroxyapatite blocks（PHABs） and an adjunct low-intensity pulsed ultrasound stimulation（LIPUS） on the fusion rate in a rabbit spinal posterolateral fusion（PLF） model were evaluated.Twenty rabbits underwent PLF with autograft and PHABs were randomly assigned to two groups：treated group with 20 min LIPUS daily and untreated control group for 4 weeks until euthanasia.The fused motion segments were subjected to manual palpation,gross observation,and radiographic investigation before histomorphologic and scanning electron microscopic analyses.Statistical differences between the LIPUS group and the control group are found in the fusion rate,bone density gray scale,trabecular bone formation,osteoblast-like cells,chondrocytes and positive expression of BMP-2 and TGF-β1 in the junction zone（significance level p〈0.05）.The results suggest that LIPUS can increase fusion rates and accelerate bone in-growth into PHAB.Hence,PHAB and LIPUS may be used together to increase fusion rates in a rabbit spinal fusion model with a promising extension to human application.

Separation of chalcopyrite and pyrite from a copper tailing by ammonium humate

Copper tailings constitute a large proportion of mine wastes. Some of the copper tailings can be recycled to recover valuable minerals. In this paper, a copper tailing was studied through the chemical analysis method, Xray diffraction and scanning electron microscope-energy dispersive spectrum. It turned out that chalcopyrite(Cu) and pyrite(S) were the main recoverable minerals in the tailing. In order to separate chalcopyrite from pyrite in low pulp pH, ammonium humate(AH) was singled out as the effective regulator. The depression mechanism of AH on the flotation of pyrite was proved by FTIR spectrum and XPS spectrum, demonstrating that there was a chemical adsorption between AH and pyrite. By Response Surface Methodology(RSM), the interaction between AH, pulp pH and iso-butyl ethionine(Z200) was discussed. It was illustrated that the optimal dosage of AH was 1678 g·t^(-1) involving both the recovery of Cu and S. The point prediction by RSM and the closed-circuit flotation displayed that the qualified Cu concentrate and S concentrate could be obtained from the copper tailing.The study indicated that AH was a promising pyrite depressor in the low pulp pH from copper tailings.

Influence of deformation and heat treatment on electrical conductivity of CuMoCr alloy

The solution heat treatment,cold deformation and subsequent aging were performed on CuMoCr alloy.And the influence of deformation and aging treatment on the electrical conductivity of CuMoCr alloy was studied through metallograph,transmission electron microscopy(TEM) and electrical conductivity measurement.Results show that deformation without subsequent aging can reduce the electrical conductivity of CuMoCr alloy,but deformation followed by the optimum aging treatment can effectively improve the electrical conductivity of CuMoCr alloy.Aging at 500 ℃ for 4 h after 80% deformation,the much better electrical conductivity of CuMoCr alloy can be obtained.Reduction of Cr content in the Cu matrix could be the reason for the enhancement of electrical conductivity.

Effects of laser heat treatment on salt spray corrosion of 1Cr5Mo heat resistant steel welding joints

The surface of 1Cr5 Mo heat-resistant steel welding joint was processed with CO2 laser, and the corrosion behaviors before and after laser heat treatment(LHT) were investigated in the salt spray corrosion environments. The microstructures, phases, residual stresses and retained austenite content of 1Cr5 Mo steel welding joint before and after LHT were analyzed with optical microscope and X-ray diffraction, respectively. The cracking morphologies and chemical compositions of corrosion products after salt spray corrosion were analyzed with field emission scanning electron microscopy(FESEM) and energy disperse spectroscopy(EDS), respectively, the polarization curves were measured on a PS-268 A type electrochemical workstation, and the mechanism of corrosion resistance by LHT was investigated as well. The results show that the passive film of original sample is destroyed owing to the corrosive media penetrating into the subsurface, resulting in the redox reaction. The content of residual austenite in the surface and the self-corrosion potential are increased by LHT, which is contributed to improving the capability of salt spray corrosion resistance.

occurrence and microscopic analyses of multicellular magnetotactic prokaryotes from coastal sediments in the Yellow Sea

Multicellular magnetotactic prokaryotes （MMPs） are a group of aggregates composed of 7-45 gram-negative cells synthesizing intracellular magnetic crystals. Although they are thought to be globally distributed, MMPs have been observed only in marine environments in America and Europe. Most MMPs share a rosette-like morphology and biomineralize iron sulfide crystals. In the present study, abundant MMPs were observed, with a density of 26 ind./cm^3, in the sediments of a coastal lagoon, Lake Yuehu, in the Yellow Sea. Optical microscopy showed that all of them were rosette shaped with a diameter of 5.5±0.8 μm. Transmission electron microscopy revealed that these MMPs were composed of 10- 16 ovoid cells and flagellated peritrichously. High-resolution transmission electron microscopy and energy dispersive X-ray analysis indicated that they biomineralized bullet-shaped magnetite crystals in highly organized parallel chains within which the magnetosomes were oriented in the same direction. This is the first report of MMPs from Asia and demonstrates the ubiquitous distribution of MMPs.

Investigation of Different Coke Samples Adhering to Cyclone Walls of a Commercial RFCC Reactor

The microstructure and properties of the coke samples collected from 4 different wall regions of the cyclone in the reactor of a residue fluid catalytic cracking unit(RFCCU) were analyzed by using the scanning-electron microscope(SEM), and the possible coke formation processes were investigated as well. The results showed that some of the heavy nonvolatile oil droplets entrained in the flowing oil and gas mixture could possibly deposit or collide on the walls by gravity settling or turbulence diffusion, and then were gradually carbonized into solid coke by condensing and polymerization along with dehydrogenation. Meanwhile some of fine catalyst particles also built up and integrated into the solid coke. The coke can be classified into two types, namely, the hard coke and the soft coke, according to its property, composition and microstructure. The soft coke is formed in the oil and gas mixture's stagnant region where the oil droplets and catalyst particles are freely settled on the wall. The soft coke appears to be loose and contains lots of large catalyst particles. However, the hard coke is formed in the oil and gas mixture's flowing region where the oil droplets and catalyst particles diffuse towards the wall. This kind of coke is nonporous and very hard, which contains a few fine catalyst particles. Therefore, it is clear that the oil and gas mixture not only carries the oil droplets and catalyst particles, but also has the effects on their deposition on the wall, which can influence the composition and characteristics of deposited coke.

Comparative analysis by simulating and testing pole impact for hot stamping front crossbeam of automobile

Hot stamping 22MnB5 steel plate with ultra-high strength has been widely used for body structural members in consideration of automobile safety and lightweight.This paper presents a verification program of simulating and testing pole impact in order to verify if the front crossbeam reinforcement assembly can meet the design requirements,reduce the overall vehicle simulation and test cost and shorten the operation period.In the same condition,the simulation proved conforming to the design requirements;however,the bumper cracked at the impacting point in the course of pole impact test.The analysis of the crack by optical microscope,Vickers and scanning electron microscope indicates that mixture of ferrite,bainite and martensite was produced in the weld heat-affected zone of the 340/590DP tow hook holder and the 22MnB5 front crossbeam;therefore,their hardness and mechanical property were reduced obviously,so that they fractured when impacted.No welding process with continuous weld but spot welding or other bonding method may be employed for the reason that the capacity of the 22MnB5 steel plate in the weld heat-affected zone was reduced obviously.

Effect of ageing temperature on precipitation of A1-Cu-Li-Mn-Zr alloy

The precipitation behaviors of an A1-Cu-Li-Mn-Zr alloy at different ageing temperatures （120, 160 and 200 ~C） were investigated using Vickers hardness measurements and transmission electron microscopy （TEM） characterization. Age hardening curves show an increase in precipitation kinetics with increasing ageing temperature. The results of TEM show that for the samples peak aged at 120 ~C, the amount of g＇ （A13Li）, GP zones/0＇ （A12Cu） and Z （A15Cu6Li2） phases is obviously higher than that of T1 （A12CuLi） precipitates; while the samples peak aged at 160 and 200 ~C are usually dominated by T1 phase with a minor fraction of GP zones/0＇ and g＇, and the Z phase almost does not form. In addition, quantitative analysis on the T1 platelets demonstrates that the samples peak aged at 200 ~C have larger plate diameter and smaller area fraction of T1, as compared to the samples peak aged at 160 ~C. Correspondingly, the possible reasons for such phenomena are discussed.

Improvement of Magnetic Field on Tribological Properties of Lubricating Oils with Zinc Butyloctyldithiophosphate

Tribological properties of 150 SN mineral oil and the oils doped with different contents of zinc butyloctyldithiophosphate(T202) under magnetic field or non-magnetic field were evaluated on a four-ball tribotester by applying an external magnetic field around the friction region. Moreover, the morphology and the tribochemical characteristics of worn surfaces were examined by a scanning electron microscope(SEM) and an X-ray photoelectron spectrometer(XPS). Then the lubrication mechanisms were discussed. The tribological test results indicated that the wear scar diameters(WSDs) of steel balls lubricated by the T202-containing lubricating oils and the friction coefficients of the corresponding oil under magnetic field were smaller than those without magnetic affection. The worn surface lubricated with the T202-formulated oils in a magnetic field was smoother than that obtained under the normal condition. Furthermore, the results of XPS analysis indicated that tribochemical films on the surfaces lubricated with T202-doped oils were mainly composed of compounds such as FeSO_4, FeS and ZnS. The atomic concentrations of oxygen, sulfur, iron, zinc and phosphorus species identified in T202 under magnetic field were higher than those without magnetic impact. It can be inferred that the improved anti-wear and friction-reducing ability of T202-doped oils was attributed to the promoted tribochemical reactions and the modification of the worn surfaces induced by magnetic field.

Cardiotrophin-1 promotes cardiomyocyte differentiation from mouse induced pluripotent stem cells via JAK2/STAT3/Pim-1 signaling pathway

Background The induced pluripotent stem cell （iPSC） has shown great potential in cellular therapy of myocardial infarction （MI）, while its application is hampered by the low efficiency of cardiomyocyte differentiation. The present study was designed to investigate the effects of cardiotrophin-1 （CT-1） on cardiomyocyte differentiation from mouse induced pluripotent stem cells （miPSCs） and the underlying mechanisms involved. Methods The optimal treatment condition for cardiomyocyte differentiation from miPSCs was established with ideal concentration （10 ng/mL） and duration （from day 3 to day 14） of CT-1 administration. Up-regulated expression of cardiac specific genes that accounted for embryonic cardiogenesis was observed by quantitative RT-PCR. Elevated amount of a-myosin heavy chain （ct-MHC） and cardiac troponin I （cTn I） positive cells were detected by immunofluorescence staining and flow cytometry analysis in CT- 1 group. Results Transmission electron microscopic analysis revealed that cells treated with CT- 1 showed better organized sacromeric structure and more mitochondria, which are morphological characteristic of matured cardiomyocytes. Western blot demonstrated that CT-1 promotes cardiomyocyte differentiation from miPSCs partly via JAK2/STAT3/Pim-1 pathway as compared with control group. Conclusions These findings suggested that CT-1 could enhance the cardiomyocyte differentiation as well as the maturation of mouse induced pluripotent stem cell derived cardiomyocytes by regulating JAK2/STAT3/Pim-1 signaling pathway.

Microstructural evaluation of Hastelloy-X transient liquid phase bonded joints:Effects of filler metal thickness and holding time

Transient liquid phase(TLP)bonding was investigated in Hastelloy-X samples with different filler metal thicknesses(20,35,50,65,and 100μm)and holding time(5,20,80,320,and 640 min)to obtain optimum bonding parameters.Microstructural evaluations using electron probe microanalysis(EPMA)and electron backscattered diffraction(EBSD)show that the central eutectic phases present in the athermally solidified zone(ASZ)are Ni_(3)B,Ni_(2)Si,and CrB,and the precipitates formed in the diffusion-affected zone(DAZ)are MoB,CrB_(2),and Mo_(2)B_(5).According to the results,decreasing the filler thickness as well as increasing the holding time helps realize the completion of isothermal solidification and reduction in the density of precipitates in the DAZ,leading to a joint with more uniform properties.Diffusion of boron and silicon to longer distances with increasing holding time causes the removal of Cr-rich borides in the DAZ and the formation of Mo-rich silicide at the joint interface.Decrease in hardness of ASZ and DAZ due to the elimination of brittle phases in these zones during long holding time causes more uniform hardness distribution in the joint area.The best results are obtained for the sample joined with the 35μm-thick filler metal for 640 min holding time.