The effects of trace element Fe on the corrosion behavior of AZ80 magnesium alloy were investigated by salt spray test and electrochemical measurements.The results show that the corrosion rate decreases with decreasin...The effects of trace element Fe on the corrosion behavior of AZ80 magnesium alloy were investigated by salt spray test and electrochemical measurements.The results show that the corrosion rate decreases with decreasing the trace element Fe content in an approximately linear relation even though the amount of trace element Fe reduces to 0.000 2%(mass fraction).The electrochemical measurements show that the corrosion potential(φcorr)of the alloy with lower trace element Fe content shifts to less negative value.It is suggested that the control trace element by purification is an effective way to enhance the corrosion resistance of AZ80 magnesium alloy.展开更多
Since the CPU of embed system has some limitation in operating speed, a new filter was put forward which implemented mountain template convolution by performing rectangle template convolution two times. It can obtain ...Since the CPU of embed system has some limitation in operating speed, a new filter was put forward which implemented mountain template convolution by performing rectangle template convolution two times. It can obtain time and frequency localization with computational complexity greatly reduced. This algorithm was applied to lightning waveforms (include chopped waveforms) parameter calculation. It simplifies the computation and the results pretreated by this algorithm are in accord with IEC1083-2 completely. It was applied in embed system successfully. Its capability in frequency restraining was researched. The validity of the algorithm was proved in theory when processing lightning waves. The standard sources and the processing results are consistent completely.展开更多
Coir fiber is derived from the coconut shells and considered to be an economical and natural material. In order to further extend its application fields,the geometry and microstructure of the coir fiber were thoroughl...Coir fiber is derived from the coconut shells and considered to be an economical and natural material. In order to further extend its application fields,the geometry and microstructure of the coir fiber were thoroughly investigated in this research. The single fiber length measurement was carried out,and it was revealed that the length of the coir fiber was between 8 and 337 mm. Length distribution of the coir fiber was simulated by using the computer technology,and was found to be in coincidence with that of most natural fibers. The grouping measurement analysis was used to study the length-weight distribution and length-linear density distribution of the fiber. It was found that the average linear density was 27.89 tex and the linear density was between 18.265 and 70.442 tex. The length-weight distribution of the coir fiber showed a Poisson pattern,and the weight of fibers with the length between 50 and 230 mm accounted for 85.28% of the total fibers measured. In this research,scanning electron microscope (SEM) was applied to observe the morphological changes of coir fiber before and after alkali treatment;and the result shows that alkali treatment leads to the removal of lignin and pectin from both the cuticle and the inside walls,which is beneficial for the interfacial adhesion with polymer matrix in composite fabrication.展开更多
基金Project(2007CB613705)supported by the National Basic Research Program of China
文摘The effects of trace element Fe on the corrosion behavior of AZ80 magnesium alloy were investigated by salt spray test and electrochemical measurements.The results show that the corrosion rate decreases with decreasing the trace element Fe content in an approximately linear relation even though the amount of trace element Fe reduces to 0.000 2%(mass fraction).The electrochemical measurements show that the corrosion potential(φcorr)of the alloy with lower trace element Fe content shifts to less negative value.It is suggested that the control trace element by purification is an effective way to enhance the corrosion resistance of AZ80 magnesium alloy.
文摘Since the CPU of embed system has some limitation in operating speed, a new filter was put forward which implemented mountain template convolution by performing rectangle template convolution two times. It can obtain time and frequency localization with computational complexity greatly reduced. This algorithm was applied to lightning waveforms (include chopped waveforms) parameter calculation. It simplifies the computation and the results pretreated by this algorithm are in accord with IEC1083-2 completely. It was applied in embed system successfully. Its capability in frequency restraining was researched. The validity of the algorithm was proved in theory when processing lightning waves. The standard sources and the processing results are consistent completely.
基金Tianjin Universities Science and Technology Development Fund Project ,China (No.20041401)
文摘Coir fiber is derived from the coconut shells and considered to be an economical and natural material. In order to further extend its application fields,the geometry and microstructure of the coir fiber were thoroughly investigated in this research. The single fiber length measurement was carried out,and it was revealed that the length of the coir fiber was between 8 and 337 mm. Length distribution of the coir fiber was simulated by using the computer technology,and was found to be in coincidence with that of most natural fibers. The grouping measurement analysis was used to study the length-weight distribution and length-linear density distribution of the fiber. It was found that the average linear density was 27.89 tex and the linear density was between 18.265 and 70.442 tex. The length-weight distribution of the coir fiber showed a Poisson pattern,and the weight of fibers with the length between 50 and 230 mm accounted for 85.28% of the total fibers measured. In this research,scanning electron microscope (SEM) was applied to observe the morphological changes of coir fiber before and after alkali treatment;and the result shows that alkali treatment leads to the removal of lignin and pectin from both the cuticle and the inside walls,which is beneficial for the interfacial adhesion with polymer matrix in composite fabrication.