The spherical macroporous cellulose(SMC) was fabricated using medical absorbent cotton as raw material and nano CaCO3 as porogenic agents.And then,the phenylglycine was grafted onto the SMC to obtain the novel spheric...The spherical macroporous cellulose(SMC) was fabricated using medical absorbent cotton as raw material and nano CaCO3 as porogenic agents.And then,the phenylglycine was grafted onto the SMC to obtain the novel spherical macroporous cellulose derivative adsorbent(PSMC).FT-IR and scanning electron microscope(SEM) were employed to characterize the adsorbents and Fe3+ ions served as model solute to evaluate the adsorption property of the adsorbents.The experimental results show that the amount of porogenic agents and the value of pH have obvious influence on adsorption capacity of the adsorbents.The data of adsorption kinetic and isotherm display that the adsorbents possess excellent equilibrium adsorption capacity(348.94 mg/g) and have a bright prospect and considerable potential in the treatment of Fe3+ ions in wastewater.展开更多
This paper describes the preparation and evaluation of a micro-sphere catalytic complex for the hydrogen production in a Reactive Sorption Enhanced Reforming （ReSER） process. The catalytic complex made by a spray te...This paper describes the preparation and evaluation of a micro-sphere catalytic complex for the hydrogen production in a Reactive Sorption Enhanced Reforming （ReSER） process. The catalytic complex made by a spray technique has a dual function containing Ni as a catalytic material and CaO as an adsorption material used in the ReSER process. The attrition characteristics of the catalytic complex are acceptable for the commercial used. The nano GaCO3 material used as a precursor of CaO showed a desirable durability with a CO2 sorption capacity of 0.6 mol CO2/kg after 10 repeating cycles under the carbonation temperature of 600 ℃, a CO2 partial pressure of 0.02 MPa, and a calcination temperature of 750 ℃ in N2 measured by a thermal gravimetric analyzer. The testing of the catalytic complex for ReSER showed a hydrogen yield of over 95 % （v/v） in the laboratory fixed fluidized bed reactor. The catalytic system has an attractive prospect in the ReSER process for hydrogen production, especially in the fluidized mode where reactor and regenerator combined in a cycling process.展开更多
基金Projects(81373284,81102344) supported by the National Natural Science Foundation of China
文摘The spherical macroporous cellulose(SMC) was fabricated using medical absorbent cotton as raw material and nano CaCO3 as porogenic agents.And then,the phenylglycine was grafted onto the SMC to obtain the novel spherical macroporous cellulose derivative adsorbent(PSMC).FT-IR and scanning electron microscope(SEM) were employed to characterize the adsorbents and Fe3+ ions served as model solute to evaluate the adsorption property of the adsorbents.The experimental results show that the amount of porogenic agents and the value of pH have obvious influence on adsorption capacity of the adsorbents.The data of adsorption kinetic and isotherm display that the adsorbents possess excellent equilibrium adsorption capacity(348.94 mg/g) and have a bright prospect and considerable potential in the treatment of Fe3+ ions in wastewater.
基金supports from Sinopec of China and from National Science Foundation of China (NSFC) under contracts No.20676119supports from Sinopec of China and from National Science Foundation of China (NSFC) under contracts No. 20876142 respectively
文摘This paper describes the preparation and evaluation of a micro-sphere catalytic complex for the hydrogen production in a Reactive Sorption Enhanced Reforming （ReSER） process. The catalytic complex made by a spray technique has a dual function containing Ni as a catalytic material and CaO as an adsorption material used in the ReSER process. The attrition characteristics of the catalytic complex are acceptable for the commercial used. The nano GaCO3 material used as a precursor of CaO showed a desirable durability with a CO2 sorption capacity of 0.6 mol CO2/kg after 10 repeating cycles under the carbonation temperature of 600 ℃, a CO2 partial pressure of 0.02 MPa, and a calcination temperature of 750 ℃ in N2 measured by a thermal gravimetric analyzer. The testing of the catalytic complex for ReSER showed a hydrogen yield of over 95 % （v/v） in the laboratory fixed fluidized bed reactor. The catalytic system has an attractive prospect in the ReSER process for hydrogen production, especially in the fluidized mode where reactor and regenerator combined in a cycling process.
