期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
金刚石线锯上砂工艺对微粉密度的影响 被引量:4
1
作者 王亮亮 王秦生 《中原工学院学报》 CAS 2012年第3期53-57,共5页
以直径0.25mm的琴钢丝为基体,粒径22~38μm的金刚石微粉(表面镀膜)为磨料,瓦特镀液为基础镀液,用微型气泵对上砂镀液进行搅拌,用落砂法上砂工艺制造金刚石线锯.结果表明:当气泵电机转速在100~120r/min之间,线锯走动速度为100mm/min,... 以直径0.25mm的琴钢丝为基体,粒径22~38μm的金刚石微粉(表面镀膜)为磨料,瓦特镀液为基础镀液,用微型气泵对上砂镀液进行搅拌,用落砂法上砂工艺制造金刚石线锯.结果表明:当气泵电机转速在100~120r/min之间,线锯走动速度为100mm/min,阴极电流密度调节至2~3A/dm2时,可以制得微粉密度稳定的线锯,其微粉密度为1.35Ct/dm2左右. 展开更多
关键词 金刚石线锯 上砂 微粉密度 阴极电流密度
下载PDF
超细矿渣粉在水泥颗粒中的密实填充作用 被引量:3
2
作者 黄法礼 王振 +5 位作者 易忠来 程欢 温家馨 袁政成 靳昊 李化建 《硅酸盐通报》 CAS 北大核心 2021年第8期2647-2652,共6页
超细矿渣粉可以填充水泥基材料内部孔隙,改善其微观结构和宏观性能。采用微粉堆积密度测定仪法、Puntke饱和点用水量法、LCPC(法国路桥实验中心)最小需水量法、浆体相对密度法、标准稠度需水量比法5种试验方法定量分析了超细矿渣粉掺量... 超细矿渣粉可以填充水泥基材料内部孔隙,改善其微观结构和宏观性能。采用微粉堆积密度测定仪法、Puntke饱和点用水量法、LCPC(法国路桥实验中心)最小需水量法、浆体相对密度法、标准稠度需水量比法5种试验方法定量分析了超细矿渣粉掺量对水泥-超细矿渣粉体系堆积密实度的影响,并将这5种试验方法测定的结果与Reschke理论计算值、Andreasen方程-灰色关联分析结果、Aim-Goff模型预测值进行了对比分析。结果表明,采用不同测试或分析方法得到的水泥-超细矿渣粉体系堆积密实度差异较大,但水泥-超细矿粉体系堆积密实度随超细矿渣粉掺量变化的趋势基本一致。浆体相对密度法和标准稠度需水量比法等方法,对胶凝材料体系堆积密实度的变化更为敏感,更适用于表征胶凝材料体系的堆积密实度。Aim-Goff模型预测结果与试验测试结果基本一致,且对堆积密实度的变化也较为敏感,建议采用Aim-Goff模型预测胶凝材料体系堆积密实度的变化规律。 展开更多
关键词 超细矿渣粉 水泥颗粒 微粉堆积密度 饱和点用水量 最小需水量 浆体相对密度 标准稠度需水量比
下载PDF
A Methodology for Producing Uniform Distribution of UO2 in a Tungsten Matrix 被引量:2
3
作者 Dennis S. Tucker Andrew O'Connor Robert Hickman 《Journal of Physical Science and Application》 2015年第4期255-262,共8页
We report a method to produce a uniform mixture of uranium dioxide spherical particles in a tungsten matrix. This method involves mixing 0.5 weight percent of high density polyethylene binder with 60 volume percent ur... We report a method to produce a uniform mixture of uranium dioxide spherical particles in a tungsten matrix. This method involves mixing 0.5 weight percent of high density polyethylene binder with 60 volume percent uranium dioxide spheres and 40 volume percent tungsten powders. Initially, hafnium oxide spheres were used as a surrogate for uranium dioxide spheres. The HfO2/W/PE powders were thoroughly mixed in a Turbula, then mixed on a hot plate above the drop point of the binder. These powders were then densified using spark plasma sintering. Microstructure was evaluated using scanning electron microscopy, density was measured and hardness measurements were made. Initial carbon content of the powders were measured and carbon content of the sintered materials was measured. Subsequently, W/UO2/Binder powders were mixed using the same methodology to ensure the process could be used for this system. These powders were sintered using hot isostatic pressing and microstructures evaluated. The resultant microstructures contained uniform distribution of HfO2 and UO2 particles in the tungsten matrix with very low carbon content. 展开更多
关键词 Nuclear propulsion TUNGSTEN depleted uranium oxide hafnium oxide powder processing spark plasma sintering.
下载PDF
Percutaneous estrogen in prevention of early postmenopausal bone loss in Chinese women 被引量:1
4
作者 孙爱军 林守清 +5 位作者 余卫 秦明伟 陈凤领 张颖 魏扬 Bruno de Lignieres 《Chinese Medical Journal》 SCIE CAS CSCD 2002年第12期1790-1795,共6页
OBJECTIVE: To identify the optimal dosage of 17beta-estradiol gel + oral progestin for preventing bone loss in postmenopausal Chinese women. METHODS: A 3-year open label, randomized, prospective clinical trial was con... OBJECTIVE: To identify the optimal dosage of 17beta-estradiol gel + oral progestin for preventing bone loss in postmenopausal Chinese women. METHODS: A 3-year open label, randomized, prospective clinical trial was conducted. Sixty healthy women who had been postmenopausal for 1 to 5 years were recruited and divided into following 4 groups: group 1, percutaneous gel 17beta-estradiol (E(2)) 1.5 mg/d plus micronized progesterone (MP) 100 mg/d; group 2, percutaneous gel 17beta-estradiol (E(2)) 1.5 mg/d plus medroxyprogesterone acetate (MPA) 2 mg/d; group 3, percutaneous gel 17beta-estradiol (E(2)) 0.75 mg/d plus micronized progesterone (MP) 100 mg/d; and group 4, percutaneous gel 17beta-estradiol (E(2)) 0.75 mg/d plus medroxyprogesterone acetate (MPA) 2 mg/d. Estrogen and progestin were given continuously for 25 days per month. Bone mineral density (BMD) was measured using quantitative computed tomography (QCT) for trabecular bone of L2-5 and dual energy X-ray absorptiometry (DEXA) for L2-4 and hip 5 times during the trial at baseline and at the 6-, 12-, 18-, 24- and 36-month visits. RESULTS: Fifty-nine patients (98.3%, 59/60) stayed in the study for 1 year, 56 patients (93.3%, 56/60) for 2 years, and 51 (85%, 51/50) for 3 years. On average, menopausal symptoms were relieved by 80% after 6 months of treatment. By the 24th month, the mean increase in BMD ranged from 4.3% to 7.5% in trabecular bone; and by the 36th month, it ranged from 4.2% to 6.2% in L2-4 and 1.61% to 3.77% in the neck. There were significant difference after treatment (P 0.05) was found in improvement of symptoms, levels of bone markers or BMD. CONCLUSION: A daily dose of estradiol gel, either 0.75 mg or 1.5 mg, is effective in preventing early postmenopausal bone loss and relieving menopausal symptoms. After 3-year treatment, spinal BMD could increase steadily, so does hip BMD, especially in the first 2 years. 展开更多
关键词 Administration Cutaneous Adult Bone Density ESTRADIOL Estrogen Replacement Therapy Female Fractures Bone Humans Medroxyprogesterone 17-Acetate Middle Aged Osteoporosis Postmenopausal
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部