期刊文献+
共找到24篇文章
< 1 2 >
每页显示 20 50 100
精密微细线用Φ8mm铜杆的生产技术改进和工艺参数优化
1
作者 杨红军 姬会爽 +3 位作者 邱进兵 张文展 张景桐 张延文 《铜业工程》 CAS 2024年第4期113-121,共9页
针对某公司SCR7000连铸连轧铜杆生产线存在的一系列问题,为攻关精密微细线(Φ0.05 mm以下)系列新产品,实施铜原料均质化技术改进(铜原料表面处理、竖炉上料系统技术改进、加料时间改进)、铜液净化技术改进、氧含量优化、铸坯成型质量改... 针对某公司SCR7000连铸连轧铜杆生产线存在的一系列问题,为攻关精密微细线(Φ0.05 mm以下)系列新产品,实施铜原料均质化技术改进(铜原料表面处理、竖炉上料系统技术改进、加料时间改进)、铜液净化技术改进、氧含量优化、铸坯成型质量改进(控制冷却强度、控制浇铸温度)和轧制工艺优化后,使用金相显微镜(OM)、扫描电镜(SEM)等分析表征手段对技术改进前后产品的质量进行对比,经过阴极铜板表面处理、上料系统技术改进及竖炉燃烧工艺优化后,实现了铜液的均质化、稳定化;通过采用多道次扒渣,增加扒渣频次,提高了上流槽与扒渣槽之间的密封性;通过改造下流槽、浇包结构,分别放置过滤砖,实现了铜液的进一步净化;通过将氧含量为(200~300)×10^(-6)的铜杆作为精密微细铜线用料,减少了Cu_(2)O共晶体弥散对铜杆性能带来的不利影响;通过将入轧工艺温度控制在830~840℃,开发的铜杆新产品生产工艺能够稳定地生产Φ0.05 mm精密微细铜线,产品得到用户的认可。 展开更多
关键词 精密微细线 铜杆 铜液 均质化
下载PDF
激光衍射微细线径测量仪的研究
2
作者 吕月兰 《仪器仪表与分析监测》 1999年第2期29-31,共3页
本文根据激先衍射理论,研究了用衍射方法测量微细线径的测量系统。在信号处理方面采用相干性极好的He-Ne激光器、高分辨率CCD图像传感器和8031单片机系统,使测量精度比较接近于理论精度。
关键词 微细线 激光衍射 测量仪 CCD 激光器 单片机
下载PDF
多种方法测量微细线径
3
作者 程铭辉 王曾 +3 位作者 张艳丽 王心妍 陈涛 廖俊均 《科学技术创新》 2021年第27期42-44,共3页
本文选用分光计、迈克尔逊干涉仪、CCD测径仪三种测量仪器对2.5mm、2mm、1.5mm、1mm四种细丝进行直径测量综合实验,从三种仪器的理论基础、操作方法、实验结果和误差分析四个方面进行分析和比较。结果表明三种仪器都能进行微细线径的测... 本文选用分光计、迈克尔逊干涉仪、CCD测径仪三种测量仪器对2.5mm、2mm、1.5mm、1mm四种细丝进行直径测量综合实验,从三种仪器的理论基础、操作方法、实验结果和误差分析四个方面进行分析和比较。结果表明三种仪器都能进行微细线径的测量,测得的结果都接近标准值,其中CCD测量微细线径最接近标准值。 展开更多
关键词 微细线 迈克尔逊干涉仪 分光计 CCD测径仪
下载PDF
不同制造工艺对高性能铜合金微细扁线尺寸、组织及性能的影响 被引量:1
4
作者 张永甲 《电线电缆》 2023年第2期37-41,47,共6页
通过对滑动拉丝机用微细扁线模具的设计及制造,采用拉制工艺成功制备出厚度(a)小于0.09 mm、宽厚比(b/a)接近8的高性能铜合金扁线导体,导体的抗拉强度、导电率和延伸率分别可达412.8 MPa、97.8%IACS、6.2%。通过尺寸测量、光学显微镜、... 通过对滑动拉丝机用微细扁线模具的设计及制造,采用拉制工艺成功制备出厚度(a)小于0.09 mm、宽厚比(b/a)接近8的高性能铜合金扁线导体,导体的抗拉强度、导电率和延伸率分别可达412.8 MPa、97.8%IACS、6.2%。通过尺寸测量、光学显微镜、电子背散射衍射分析(EBSD)、拉力和电阻等试验,研究了拉制法与精轧法两种制备工艺对铜合金微细扁线组织及性能的变化规律。试验结果表明,拉制工艺尺寸控制更精准,且可通过模具设计灵活控制扁线R角类型(圆角型、圆边型),更有利于提升扁线电机的能效,其加工硬化效果较精轧工艺更为缓慢,退火时两种工艺的软化特性有一定差异。 展开更多
关键词 微细线 高性能铜合金 圆角 软化特性 圆边
下载PDF
Cu-4.0Ag合金微细线制备工艺及性能研究 被引量:13
5
作者 朱利媛 李雷 +3 位作者 冀国良 李强 封博文 刘光林 《特种铸造及有色合金》 CAS CSCD 北大核心 2017年第12期1357-1360,共4页
提出了采用连续水平定向凝固法制备Cu-4.0Ag合金铸杆,然后用多道次连续冷拉拔的方法生产Cu-Ag合金微细线。结果表明,制备出的φ8mm铸杆具有连续纵向柱状晶组织,可不经中间退火而连续冷拉拔制备微细线。解决了传统冷型连铸制备微细线时... 提出了采用连续水平定向凝固法制备Cu-4.0Ag合金铸杆,然后用多道次连续冷拉拔的方法生产Cu-Ag合金微细线。结果表明,制备出的φ8mm铸杆具有连续纵向柱状晶组织,可不经中间退火而连续冷拉拔制备微细线。解决了传统冷型连铸制备微细线时需要多道次中间退火的问题,避免了氧化和断线。所制备的φ0.05mm的微细线强度高于1GPa,电导率为44.78 MS/m,其强化机理为Ag纤维强化。 展开更多
关键词 定向凝固 Cu-4.0Ag合金 微细线 力学性能 导电性
原文传递
微细扁线材收排线的控制方法 被引量:1
6
作者 贾锐 何建文 郭钟宁 《机电工程技术》 2014年第8期19-21,93,共4页
介绍了一种适用于微细扁线材的收排线控制方法。线材在收卷过程中,截面呈扁平形状的线材相对于圆形截面线材,收卷过程对收排线要求更高,现开发了一种收排线机构及控制系统,使排线和收线过程按一定数学关系排列在工字轮上。实践检验,该... 介绍了一种适用于微细扁线材的收排线控制方法。线材在收卷过程中,截面呈扁平形状的线材相对于圆形截面线材,收卷过程对收排线要求更高,现开发了一种收排线机构及控制系统,使排线和收线过程按一定数学关系排列在工字轮上。实践检验,该机构能稳定收卷截面形状扁平的微细线材,并能根据收线辊的长度调节排线行程,线材排列紧密且定位精度高。 展开更多
关键词 微细线 伺服电机 绝对值型编码器
下载PDF
基于光刻方法的厚膜微细布线技术研究 被引量:1
7
作者 郝沄 袁海 +2 位作者 李创 王博哲 谭晓惠 《电子工艺技术》 2020年第2期76-79,113,共5页
通过研究光刻/腐蚀工艺,突破高均匀性可腐蚀的厚膜膜层制作、光刻精度优化与腐蚀钻蚀控制等关键技术,实现了厚膜高精度微细布线基板制作与考核。基板特征线宽/间距45μm/45μm,线条尺寸精度±3μm,显著改善印刷金导体线条的图形精... 通过研究光刻/腐蚀工艺,突破高均匀性可腐蚀的厚膜膜层制作、光刻精度优化与腐蚀钻蚀控制等关键技术,实现了厚膜高精度微细布线基板制作与考核。基板特征线宽/间距45μm/45μm,线条尺寸精度±3μm,显著改善印刷金导体线条的图形精度和垂直度。通过了基板军标可靠性考核,为拓宽厚膜基板技术应用领域提供技术支撑。 展开更多
关键词 厚膜 光刻 腐蚀 微细线
下载PDF
微细旦涤纶线的研制开发
8
作者 石武铎 袁松鹤 《天津纺织科技》 1999年第4期38-41,共4页
针对目前服装业面料档次越来越高,从而对高速缝纫线也提出了更高的强力、条干和支数要求,为此,公司领导着力于对我公司拳头名牌产品——涤沦缝纫线向精细化方向发展,在市场调研的基础上。
关键词 微细旦涤纶线 缝纫线 研制
下载PDF
微细旦涤纶线的研制开发
9
作者 石武铎 袁松鹤 《北京纺织》 1999年第3期49-51,共3页
针对目前服装业面料档次越来越高,从而对高速缝纫线也提出了更高的强力、条干和支数要求,我公司着力于对拳头名牌产品———涤纶缝纫线向精细化方向发展,在市场调研的基础上,确定开发研制微细旦涤纶线系列产品,并被列入1998年... 针对目前服装业面料档次越来越高,从而对高速缝纫线也提出了更高的强力、条干和支数要求,我公司着力于对拳头名牌产品———涤纶缝纫线向精细化方向发展,在市场调研的基础上,确定开发研制微细旦涤纶线系列产品,并被列入1998年江苏省纺织新产品计划项目。该项目用... 展开更多
关键词 微细旦涤纶线 涤纶线 缝纫线
下载PDF
Effect of wire diameter compression ratio on drawing deformation of micro copper wire
10
作者 Tao HUANG Han-jiang WU +3 位作者 Ke-xing SONG Yan-min ZHANG Yan-jun ZHOU Shao-lin LI 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第8期2605-2618,共14页
A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micr... A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process. 展开更多
关键词 micro copper wire drawing deformation crystal plasticity finite element slip mode
下载PDF
前置式在线中间退火工艺及其拉丝机
11
作者 韩富生 《电线电缆》 2012年第5期41-44,共4页
指出了用成品热处理代替中间热处理的诸多弊端,推出了前置式在线中间退火工艺和前置式中间退火拉丝机,介绍了前置式中间退火拉丝机的机械结构,及其产品质量提高、设备简单可靠、成本低廉等诸多优越性,此工艺及其拉丝机特别适用于微细线... 指出了用成品热处理代替中间热处理的诸多弊端,推出了前置式在线中间退火工艺和前置式中间退火拉丝机,介绍了前置式中间退火拉丝机的机械结构,及其产品质量提高、设备简单可靠、成本低廉等诸多优越性,此工艺及其拉丝机特别适用于微细线和铝及其合金在线退火。 展开更多
关键词 有色金属 连续退火 工艺 拉丝机 微细线
下载PDF
控制半导体超微细结晶生长技术
12
作者 吴秀丽 李恒顺 《光机电信息》 1995年第2期34-35,共2页
日立公司中央研究所已经成功地开发了控制GaAs系列半导体超微细结晶生长技术。此技术成功的关键是制成完善的机械装置,在此基础上,成功地开发晶体生长的人工控制方法。其结果,粗细为10nm超微细线结晶中形成关键的异质结构,并能够控... 日立公司中央研究所已经成功地开发了控制GaAs系列半导体超微细结晶生长技术。此技术成功的关键是制成完善的机械装置,在此基础上,成功地开发晶体生长的人工控制方法。其结果,粗细为10nm超微细线结晶中形成关键的异质结构,并能够控制超微细线结晶生长位置。 展开更多
关键词 半导体 晶体生长 微细线结晶 日立公司中央研究所 机械装置 人工控制
下载PDF
一种微型精密磁滞张力器的设计开发 被引量:2
13
作者 郑勐 李言 +1 位作者 尚军 张喜 《机械科学与技术》 CSCD 北大核心 2011年第9期1431-1434,共4页
根据磁滞力原理,利用磁路解析的方法获得了张力器的电控参数,并对微型精密磁滞张力器的结构和参数的选择进行分析,设计开发了一种微型精密磁滞张力器,解决了张力器精确控制的关键技术问题。实验结果表明:张力稳定,控制方便,可以满足微... 根据磁滞力原理,利用磁路解析的方法获得了张力器的电控参数,并对微型精密磁滞张力器的结构和参数的选择进行分析,设计开发了一种微型精密磁滞张力器,解决了张力器精确控制的关键技术问题。实验结果表明:张力稳定,控制方便,可以满足微小张力的控制要求,极大提高了线圈的绕制质量。 展开更多
关键词 微细线线 磁滞张力器 磁阻矩 气隙
下载PDF
玻璃基板激光微细熔覆柔性布线技术研究 被引量:2
14
作者 李祥友 祁小敬 曾晓雁 《中国激光》 EI CAS CSCD 北大核心 2005年第5期713-716,共4页
与传统的布线技术相比,激光微细熔覆柔性布线技术可以提高线路板制备的效率并降低生产成本。对基于玻璃基板的激光微细熔覆柔性布线技术的工艺进行了重点研究,分析了激光功率密度和扫描速度对导体厚度和宽度的影响规律,同时研究了烧结... 与传统的布线技术相比,激光微细熔覆柔性布线技术可以提高线路板制备的效率并降低生产成本。对基于玻璃基板的激光微细熔覆柔性布线技术的工艺进行了重点研究,分析了激光功率密度和扫描速度对导体厚度和宽度的影响规律,同时研究了烧结时间对导体电阻率和结合强度的影响趋势。试验表明,激光功率密度和扫描速度对导线的厚度影响不大,而对导线的宽度有着重要的影响。导线宽度随功率密度增加、扫描速度减小而增加,并都存在临界值;随着烧结时间延长,导线电阻率减小,结合强度提高。在此基础上,探讨了导体附着机理和导电机理。 展开更多
关键词 激光技术 激光微细熔覆柔性布线 玻璃基板 银导体
原文传递
Influence of Copper Stress on Ultra-structure of Wheat Seedlings 被引量:6
15
作者 于红丽 姚瑞芹 肖昕 《Agricultural Science & Technology》 CAS 2010年第5期7-9,45,共4页
Transmission Electron Microscope (TEM) Technology was used to investigate the effect of 25,100 and 200 mg/kg copper on ultra-structure of root tip and leaf blade of wheat. Result showed that serious damage was found w... Transmission Electron Microscope (TEM) Technology was used to investigate the effect of 25,100 and 200 mg/kg copper on ultra-structure of root tip and leaf blade of wheat. Result showed that serious damage was found with Copper of 25,100 and 200 mg/kg. Plasmolysis,concentrated cytoplasm,chloroplast inflation,lamellar structure disturbance,capsule disappearance and disintegration,mitochondria structures ambiguity and vacuolization were all symptoms under Cu stress. There were positive correlation between concentration of coper stress and the degree of injury,and the degree of injury of copper were different in different organelles. Mitochondria were the most sensitive organelles,and there was patient difference in the same organelles of different parts. 展开更多
关键词 Wheat Copper Cell ultra-structure
下载PDF
Nuclear and mitochondrial DNA microsatellite instability in hepatocellular carcinoma in Chinese 被引量:10
16
作者 Dian-ChunFang LiFang Rong-QuanWang Shi-MingYang 《World Journal of Gastroenterology》 SCIE CAS CSCD 2004年第3期371-375,共5页
AIM:To study the nuclear microsatellite instability (nMSI) at BAT26 and mitochondral microsalellite instability (mtMSI) in the occurrence and development of hepatocellular carcinoma and the relationship between nMSI ... AIM:To study the nuclear microsatellite instability (nMSI) at BAT26 and mitochondral microsalellite instability (mtMSI) in the occurrence and development of hepatocellular carcinoma and the relationship between nMSI and mtMSI.METHODS: nMSI was observed with PCR and mtMSI with PCR-SSCP in 52 cases of hepatocellular carcinoma.RESULTS:mtMSI was detected in 11 out of the 52 cases of hepatocellular carcinoma (21.2%). Among the 11 cases of hepatocellular carcinoma with mtMSI, 7 occured in one locus and 4 in 2 loci. The frequency of mtMSI in the 52 cases of hepatocellular carcinoma showed no correlation to sex, age,infection of hepatitis B, liver cirrhosis as well as positive AFP of the patients (P>0.05). In addition, nMSI was detected in 3 out of 52 cases of hepatocellular carcinoma (5.8%) and there was no correlation of the incidence of mtMSI to that of nMSI (P>0.05).CONCLUSION:mtMSI may be involved in the coccurrence and development of hepatocellular carcinoma and it is independent of nMSI. 展开更多
关键词 Cell Nucleus ADULT Aged Asian Continental Ancestry Group Carcinoma Hepatocellular DNA Mitochondrial Female Humans Liver Neoplasms Male Microsatellite Repeats Middle Aged Research Support Non-U.S. Gov't
下载PDF
Effects of Ce on microstructure of semi-continuously cast Mg-1.5Zn-0.2Zr magnesium alloy ingots 被引量:2
17
作者 赵凯阳 彭晓东 +3 位作者 谢卫东 魏群义 杨艳 魏国兵 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2010年第B07期324-330,共7页
Mg-1.5Zn-0.2Zr-xCe (x=0, 0.1, 0.3, 0.5, mass fraction, %) alloys were prepared by conventional semi-continuous casting. The effect of rare earth Ce on the microstructure of Mg-1.5Zn-0.2Zr-xCe alloys was studied and th... Mg-1.5Zn-0.2Zr-xCe (x=0, 0.1, 0.3, 0.5, mass fraction, %) alloys were prepared by conventional semi-continuous casting. The effect of rare earth Ce on the microstructure of Mg-1.5Zn-0.2Zr-xCe alloys was studied and the distribution of Ce was analyzed by optical microscopy (OM), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The results indicate that Ce element exists in the form of Mg12Ce phase and has an obvious refining effect on the microstructure of test alloys. As the Ce content increases, the grain size reduces, the grain boundaries turn thinner, and the distribution of Mg12Ce precipitates becomes more and more dispersed. The Mg-1.5Zn-0.2Zr alloy with 0.3%Ce has the best refinement effect. From center to periphery of the ingot, the amount of granular precipitates in the grain reduces. In longitudinal section of the ingot, some relative long columnar grains appear. 展开更多
关键词 Mg-1.5Zn-0.2Zr alloy CE semi-continuous casting REFINEMENT
下载PDF
ELECTRON MICROSCOPIC AUTORADIOGRAPHIC STUDY ON SUBCELLULAR LOCALIZATION OF FISSIONPRODUCT ^(147)Pm INTISSUE CELLS
18
作者 朱寿彭 汪源长 《Nuclear Science and Techniques》 SCIE CAS CSCD 1994年第4期206-211,共6页
The early risk of internal contaminated accumulation of 147Pm is in blood cells and endothelial cells, especially in red blood cells. Then 147Pm is selectively deposited in ultrastructure of liver cells, such as in nu... The early risk of internal contaminated accumulation of 147Pm is in blood cells and endothelial cells, especially in red blood cells. Then 147Pm is selectively deposited in ultrastructure of liver cells, such as in nucleus, nucleolus, rough endoplasmic reticulum, mitochondria and microbodies. Dense tracks also appear in mitochondria and lysosome of pedal cells within renal corpuscle, and so does in nucleus as well as in mitochondria and microbodies of epicyte of kidney near-convoluted tubule. With the prolongation of observing time, 147Pm is selectively and steadily deposited in subcellular level of organic component for bone. Substantial amount of 147Pm is taken up into the nuclear fraction of osteoclasts and osteoblasts. Particularly, in organelles 147Pm is mainly accumulated in rough endoplasmic reticulum and in mitochondria.Autoradiographic tracks especially localize in combined point between Golgi complex and transitive vesicle of rough endoplasmic reticulum. In addition, numerous 147Pm deposited in collagenous fibre within interstitial of bone cells is hardly excreted. 展开更多
关键词 Electron microscopic autoradiography ACCUMULATION Fission product 147 ̄Pm Subcellular leve
下载PDF
Response of Marine Microalgae,Heterotrophic Bacteria and Their Relationship to Enhanced UV-B Radiation
19
作者 ZHOU Wenli TANG Xuexi +2 位作者 XIAO Hui WANG You WANG Renjun 《Journal of Ocean University of China》 SCIE CAS 2009年第1期35-38,共4页
Ozone depletion in the stratosphere has enhanced solar UV-B radiation reaching the Earth surface and has brought about significant effects to marine ecosystems. The effects of enhanced UV-B radiation on marine microal... Ozone depletion in the stratosphere has enhanced solar UV-B radiation reaching the Earth surface and has brought about significant effects to marine ecosystems. The effects of enhanced UV-B radiation on marine microalgae, heterotrophic bacteria and the interaction between them are discussed. The effects on marine microalgae have been proved to occur at molecular, cellular and population levels. Enhanced UV-B radiation increases microalgal flavonoid content but decreases their chlorophyll content and pho- tosynthesis rate; this radiation induces genetic change and results in DNA damage and change of protein content. There have been fewer studies on the effects of UV-B radiation on marine heterotrophic bacteria. Establishment of a microalgal ecological dynamic model at population and commuity levels under UV-B radiation has gradually become a hotspot. The effects of enhanced UV-B radiation on microalgae commtmities, heterotrophic bacterial populations and interaction between them will become a focus in the near future. This paper will make an overview on the studies concerning the effects of enhanced UV-B radiation on marine microalgae and heterotrophic bacteria and the interaction between them. 展开更多
关键词 UV-B radiation EFFECT MICROALGAE heterotrophic bacteria
下载PDF
Development of Biotechnology for Microbial Synthesis of Gold and Silver Nanoparticles
20
作者 Tamaz Levan Kalabegishvili Ivane Giorgi Murusidze +12 位作者 Elena Ivan Kirkesali Alexander Nikoloz Rcheulishvil Eteri Nikoloz Ginturi Eteri Simon Gelagutashvili Nana Eremey Kuchava Nanuli Vakhtang Bagdavadze Dodo Trofim Pataraya Manana Amiran Gurielidze Hoi-Ying Holman Marina Vladimirovna Frontasyeva Inga Ivanovna Zinicovscaia Sergey Sergeevich Pavlov Vasiliy Timofeevich Gritsyna 《Journal of Life Sciences》 2013年第2期110-122,共13页
Several bacterial strains of Actinomycetes belonging to Streptomyces and Arthrobacter genera for the first time were used to study the biotechnology of synthesis of gold and silver nanoparticles. The experimental cond... Several bacterial strains of Actinomycetes belonging to Streptomyces and Arthrobacter genera for the first time were used to study the biotechnology of synthesis of gold and silver nanoparticles. The experimental conditions of gold and silver nanoparticles production by the cells of studied strains in aqueous chloroauric acid (HAuCIq) and in silver nitrate (AgNO3) solutions, respectively, were determined. Concentration and time-dependences of nanoparticle formation were investigated. The complex of optical and analytical methods was used for testing the gold and silver nanoparticles in the bacterial biomass. The TEM (Transmission Electron Microscopy) and XRD (X-ray Diffraction) data in all cases demonstrated the presence of crystals with fcc (face centered cubic) structure. The results obtained show that the Actinomycetes are capable of producing gold and silver nanoparticles of spherical shape extracellularly when exposed to suitable compounds. The particle size distribution shows that the sizes of nanoparticles are in the range of 5 nm to 80 nm. The biomass obtained may be used for industrial as well as medical and pharmaceutical purposes. 展开更多
关键词 Microbial synthesis NANOPARTICLES GOLD SILVER biotechnology.
下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部