In order to investigate the effects of two mineral admixtures （i. e., fly ash and ground slag）on initial defects existing in concrete microstructures, a high-resolution X-ray micro-CT（ micro-focus computer tomogra...In order to investigate the effects of two mineral admixtures （i. e., fly ash and ground slag）on initial defects existing in concrete microstructures, a high-resolution X-ray micro-CT（ micro-focus computer tomography）is employed to quantitatively analyze the initial defects in four series of highperformance concrete （HPC）specimens with additions of different mineral admixtures. The nigh-resolution 3D images of microstructures and filtered defects are reconstructed by micro- CT software. The size distribution and volume fractions of initial defects are analyzed based on 3D and 2D micro-CT images. The analysis results are verified by experimental results of watersuction tests. The results show that the additions of mineral admixtures in concrete as cementitious materials greatly change the geometrical properties of the microstructures and the spatial features of defects by physical-chemistry actions of these mineral admixtures. This is the major cause of the differences between the mechanical behaviors of HPC with and without mineral admixtures when the water-to-binder ratio and the size distribution of aggregates are constant.展开更多
A surface variable, density of water-feather touching points （Dp） was proposed in this paper to express surface property of water repellency of contour feather. Tests in 29 species using breast contour feathers indi...A surface variable, density of water-feather touching points （Dp） was proposed in this paper to express surface property of water repellency of contour feather. Tests in 29 species using breast contour feathers indicated that Dp was small in tericolous species, medium in wading and diving species, large in swimming species, with only a few exceptions. This implied that birds achieve appropriate Dp by optimizing the microstructure of feather to meet the requirement of water repellency. Therefore, Dp was a morphological marker linking structure and function of feather in studies of adaptive evolution of birds.展开更多
In this study,the effect of welding parameters on the microstructure and mechanical properties of the dissimilar resistance spot welded DP1000–QP1180 joints was investigated.Heat affected zone(HAZ)width of QP1180 sid...In this study,the effect of welding parameters on the microstructure and mechanical properties of the dissimilar resistance spot welded DP1000–QP1180 joints was investigated.Heat affected zone(HAZ)width of QP1180 side was smaller than that of DP1000 side.HAZ width and indentation depth increased with increasing welding current and welding time.The nugget size increased with increasing welding current whereas it increased at lower currents and decreased at higher currents with increasing welding time.The lowest hardness was on the DP1000 side.On the QP1180 side,the center of HAZ had the peak hardness.With increasing welding current,hardness values throughout the weld zone decreased and the tensile shear load increased.At lower welding currents,the welding time did not affect the tensile shear load.Tensile elongation decreased with the increase of welding time,whereas there is no relationship between the welding current and elongation.The spot-welded joints having higher strength exhibited a more ductile fracture characteristic.展开更多
After the success of the Daya Bay experiment, the Jiangmen Underground Neutrino Observatory （JUNO） was launched to measure neutrino-mass hierarchy and oscillation parameters and to study other neutrino physics. Its ...After the success of the Daya Bay experiment, the Jiangmen Underground Neutrino Observatory （JUNO） was launched to measure neutrino-mass hierarchy and oscillation parameters and to study other neutrino physics. Its central detector is set for antineutrinos from reactors, the Earth, the atmosphere, and the Sun. The main requirements of the central detector are con- tainment of 20 kt of liquid scintillator, as the target mass, and 3% energy resolution. It is about a ball-shape detector of 38.5 m with -75% coverage of PMT on its inner surface. The design of such a huge detector is a big challenge because it must meet the requirements for several different types of physics measurement and possess the feasibility and reliability in its structure and engineering, all at reasonable time and cost. One option for the JUNO central detector is a hyper-scale acrylic ball sub- merged in the water to shield the background. This paper proposes a structural scheme for such an acrylic ball that is supported by a stainless-steel truss, inspired by point-supported glass-curtain walls in civil engineering. The preliminary design of the scheme is completed and verified by finite element （FE） method using ABAQUS. FE analysis shows that the scheme can con- trol the stress level of the acrylic ball within the limit of 5 to 10 MPa, in accordance with the demand of the design objective of the central detector. The scheme is of outstanding global stability and allows various chocces on local connections. We prove that the scheme is of good feasibility and should be a reasonable option for the central detector.展开更多
基金The Scholarship Supported by Ministry of Education of China for Research Abroad(No.3037[2006])the Excellent Doctoral Dissertation Foundation of Southeast University (No.YBTJ-0512)the National Basic Research Program of China(973Program)(No.2009CB623203)
文摘In order to investigate the effects of two mineral admixtures （i. e., fly ash and ground slag）on initial defects existing in concrete microstructures, a high-resolution X-ray micro-CT（ micro-focus computer tomography）is employed to quantitatively analyze the initial defects in four series of highperformance concrete （HPC）specimens with additions of different mineral admixtures. The nigh-resolution 3D images of microstructures and filtered defects are reconstructed by micro- CT software. The size distribution and volume fractions of initial defects are analyzed based on 3D and 2D micro-CT images. The analysis results are verified by experimental results of watersuction tests. The results show that the additions of mineral admixtures in concrete as cementitious materials greatly change the geometrical properties of the microstructures and the spatial features of defects by physical-chemistry actions of these mineral admixtures. This is the major cause of the differences between the mechanical behaviors of HPC with and without mineral admixtures when the water-to-binder ratio and the size distribution of aggregates are constant.
基金This study is supported by Natural Science Foundation of Heilongjiang Province (QC05072) and Fund for Scientific Research of Northeast Forestry University
文摘A surface variable, density of water-feather touching points （Dp） was proposed in this paper to express surface property of water repellency of contour feather. Tests in 29 species using breast contour feathers indicated that Dp was small in tericolous species, medium in wading and diving species, large in swimming species, with only a few exceptions. This implied that birds achieve appropriate Dp by optimizing the microstructure of feather to meet the requirement of water repellency. Therefore, Dp was a morphological marker linking structure and function of feather in studies of adaptive evolution of birds.
基金Project supported by Beycelik Gestamp Inc.,Turkey
文摘In this study,the effect of welding parameters on the microstructure and mechanical properties of the dissimilar resistance spot welded DP1000–QP1180 joints was investigated.Heat affected zone(HAZ)width of QP1180 side was smaller than that of DP1000 side.HAZ width and indentation depth increased with increasing welding current and welding time.The nugget size increased with increasing welding current whereas it increased at lower currents and decreased at higher currents with increasing welding time.The lowest hardness was on the DP1000 side.On the QP1180 side,the center of HAZ had the peak hardness.With increasing welding current,hardness values throughout the weld zone decreased and the tensile shear load increased.At lower welding currents,the welding time did not affect the tensile shear load.Tensile elongation decreased with the increase of welding time,whereas there is no relationship between the welding current and elongation.The spot-welded joints having higher strength exhibited a more ductile fracture characteristic.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA10010200)the Tsinghua University Initiative Scientific Research Program(Grant No.20131089288)
文摘After the success of the Daya Bay experiment, the Jiangmen Underground Neutrino Observatory （JUNO） was launched to measure neutrino-mass hierarchy and oscillation parameters and to study other neutrino physics. Its central detector is set for antineutrinos from reactors, the Earth, the atmosphere, and the Sun. The main requirements of the central detector are con- tainment of 20 kt of liquid scintillator, as the target mass, and 3% energy resolution. It is about a ball-shape detector of 38.5 m with -75% coverage of PMT on its inner surface. The design of such a huge detector is a big challenge because it must meet the requirements for several different types of physics measurement and possess the feasibility and reliability in its structure and engineering, all at reasonable time and cost. One option for the JUNO central detector is a hyper-scale acrylic ball sub- merged in the water to shield the background. This paper proposes a structural scheme for such an acrylic ball that is supported by a stainless-steel truss, inspired by point-supported glass-curtain walls in civil engineering. The preliminary design of the scheme is completed and verified by finite element （FE） method using ABAQUS. FE analysis shows that the scheme can con- trol the stress level of the acrylic ball within the limit of 5 to 10 MPa, in accordance with the demand of the design objective of the central detector. The scheme is of outstanding global stability and allows various chocces on local connections. We prove that the scheme is of good feasibility and should be a reasonable option for the central detector.
