现有几何光学方法的二向反射分布函数BRDF(bidirectional reflection distribution function)模型在计算阴影遮蔽效应时普遍应用Blinn几何衰减效应假设,其等倾角V形槽近似得出的分段折线形式的几何衰减因子导致BRDF曲线存在较大的误差....现有几何光学方法的二向反射分布函数BRDF(bidirectional reflection distribution function)模型在计算阴影遮蔽效应时普遍应用Blinn几何衰减效应假设,其等倾角V形槽近似得出的分段折线形式的几何衰减因子导致BRDF曲线存在较大的误差.基于倾斜角随机高斯分布的微面元理论提出了一种新的几何衰减模型,得出了积分形式的几何衰减因子表达式,数值模拟比较了Blinn几何衰减因子与修正后的积分型衰减因子以及对应的BRDF模型曲线.结果表明:提出的几何衰减因子在物理合理性以及模拟精度方面都有明显提升,使BRDF模型曲线与已有BRDF数据之间的标准误差由0.0636减小到0.0084.展开更多
Ti/Cu/Ti laminated composites were fabricated by corrugated rolling(CR) and flat rolling(FR) method.Microstructure and mechanical properties of CR and FR laminated composites were investigated by scanning electron mic...Ti/Cu/Ti laminated composites were fabricated by corrugated rolling(CR) and flat rolling(FR) method.Microstructure and mechanical properties of CR and FR laminated composites were investigated by scanning electron microscopy, numerical simulation methods, peel and tensile examinations. The effect of CR and FR was comparatively analyzed. The results showed that the CR and FR laminated composites exhibited different effective plastic strain distributions of the Ti layer and Cu layer at the interface. The recrystallization texture, prismatic texture and pyramidal texture were developed in the Ti layer by CR, while the R-Goss texture and shear texture were developed in the Cu layer by CR. The typical deformation texture components were developed in the Ti layer and Cu layer of FR laminated composites. The CR laminated composites had higher bond strength, tensile strength and ductility.展开更多
Based on the bulk free energy density and the degenerate mobility constructed by the quartic double-well potential function,a phase field model is established to simulate the evolution of intragranular microvoids due ...Based on the bulk free energy density and the degenerate mobility constructed by the quartic double-well potential function,a phase field model is established to simulate the evolution of intragranular microvoids due to surface diffusion in a stress field.The corresponding phase field governing equations are derived.The evolution of elliptical microvoids with different stressesΛ,aspect ratiosβand linewidths hˉis calculated using the mesh adaptation finite element method and the reliability of the procedure is verified.The results show that there exist critical values of the stressΛc,the aspect ratioβc and the linewidth hˉc of intragranular microvoids under equivalent biaxial tensile stress.When Λ≥Λ_(c),β≥β_(c) or h≤h_(c),the elliptical microvoids are instable with an extending crack tip.WhenΛ<Λ_(c),β<β_(c) or hˉ>h_(c),the elliptical microvoids gradually cylindricalize and remain a stable shape.The instability time decreases with increasing the stress or the aspect ratio,while increases with increasing the linewidth.In addition,for the interconnects containing two elliptical voids not far apart,the stress will promote the merging of the voids.展开更多
The definitions of generalized pseudoconvex,generalized quasiconvex and its stri ctly generalized convexity were presented for the static programming at locally star -shaped set using the concept of right-upper deriva...The definitions of generalized pseudoconvex,generalized quasiconvex and its stri ctly generalized convexity were presented for the static programming at locally star -shaped set using the concept of right-upper derivative and the concept of sub linear. The sufficient and necessary conditions of the static programming were d erived in terms of a generalized Lemma in this paper. The results obtained are u seful for the further study on the duality of static programming and cover many already known conditions.展开更多
Physico-chemical composition of sweet orange （Citrus sinensis L.） cv. blood red was determined in relation to different storage conditions and micronutrients application at department of horticulture, Agricultural U...Physico-chemical composition of sweet orange （Citrus sinensis L.） cv. blood red was determined in relation to different storage conditions and micronutrients application at department of horticulture, Agricultural University Peshawar, Pakistan during 2006-2007 and 2007-2008. The post-harvest quality of sweet orange was evaluated for 60 days storage with 20 days intervals. Fruit were harvested after the foliar application of zinc and boron in two consecutive seasons. The harvested fruits were stored at an ambient temperature （ATS） of 25 ＋ 2 ℃ and at low temperature storage （LTS） of 15 ± 2 ℃ with 60%-70% relative humidity （RH） for 60 days. Sweet oranges stored at LTS maintained better fruit quality than ATS. The foliar application of zinc and boron significantly enhanced fruit juice content, total soluble solids （TSS）, ascorbic acid （AA） and non-reducing sugar （NRS） of fruit. However, fruit juice content, TSS and AA were observed significantly higher, when the fruit was treated with high zinc （1%） and low boron （0.02%）. The percent of weight loss, disease incidence, TSS and reducing sugar （RS） increased with increasing the storage durations. A reduction was noted in fruit juice, AA and NRS with increasing the storage durations.展开更多
Molar concentration of gold nanoparticles is one of the most critical parameters of gold colloids in order to develop their applications in sensing, diagnostics and nanomedicine. Previous methods often stand just for ...Molar concentration of gold nanoparticles is one of the most critical parameters of gold colloids in order to develop their applications in sensing, diagnostics and nanomedicine. Previous methods often stand just for gold nanoparticles with regular shape and narrow size distribution. In the present work, we proposed an absolute quantification method that determined the molar concentration of gold nanoparticles with arbitrary shapes and polydisperse sizes. This approach involved the real time monitoring and counting of individual nanoparticles collision events, from which the quantification of molar concentration was achieved using a theoretical model consisting of Fiek＇s laws of diffusion and Stokes-Einstein equation. The determination of spherical gold nanoparticles concentration resulted in excellent agreement with traditional spectrometry method. It was further demonstrated that the present approach can be expanded to determine the molar concentration of gold nanoparticles with arbitrary shapes and poly-diversed distributions.展开更多
Purpose： This study aims to explore the biomechanical mechanism of lower limb injuries to the driver by establishing a finite element （FE） simulation model of collisions. Methods： First a minibus FE model was inte...Purpose： This study aims to explore the biomechanical mechanism of lower limb injuries to the driver by establishing a finite element （FE） simulation model of collisions. Methods： First a minibus FE model was integrated with a seat belt system. Then it was used to rebuild two collisions together with the total human model for safety （THUMS） provided by Toyota Motor Corporation： a rear-end collision between a minibus and a truck and a head-on collision of a minibus to a rigid wall. The impact velocities of both collisions were set at 56 km/h. The vehicle dynamic response, vehicle deceleration, and dashboard intrusion in the two collisions were compared. Results： In the minibus rear-end truck collision, the peak values of the yon Mises equivalent stress at the tibia and the femur were 133 MPa and 126 MPa respectively; while in the minibus head-on rigid wall collision, the data were 139 MPa and 99 MPa. Compared with the minibus head-on rigid wall collision, the vehicle deceleration was smaller and the dashboard intrusion was larger in the minibus rear-end truck collision. Conclusion： The results illustrate that a longer dashboard incursion distance corresponds to a higher yon Mises equivalent stress at the femur. The simulation results are consistent with the driver＇s autopsy report on lower limbs injuries. These findings verify that FE simulation method is reliable and useful to analyze the mechanisms of lower limb iniuries to the driver in minibus frontal collisions.展开更多
Adjusting the spacers between the electron-acceptor and the elector-donor is important to design organic ternary memory material but rarely reported. In this paper, two small molecules, ZIPGA and ZIPCAD with benzene r...Adjusting the spacers between the electron-acceptor and the elector-donor is important to design organic ternary memory material but rarely reported. In this paper, two small molecules, ZIPGA and ZIPCAD with benzene ring or triphenylamine as the spacers, were designed and synthesized to fabricate memory devices. The A1/ZIPGA/indium-tin oxide （ITO） device showed ternary characteristics, whereas A1/ZIPCAD/ITO had no obvious memory characteristics. Density functional theory calculation, X-ray diffraction （XRD） and atomic force microscopy （AFM） were employed to interpret the different memory properties. ZIPGA thin film has the closer intermolecular packing and flatter surface morphology than ZIPCAD film, which was favorable to the electron migration. This work demonstrates the importance of spacers and reveals that triphenylamine may be not a good spacer in design of new memory material.展开更多
文摘现有几何光学方法的二向反射分布函数BRDF(bidirectional reflection distribution function)模型在计算阴影遮蔽效应时普遍应用Blinn几何衰减效应假设,其等倾角V形槽近似得出的分段折线形式的几何衰减因子导致BRDF曲线存在较大的误差.基于倾斜角随机高斯分布的微面元理论提出了一种新的几何衰减模型,得出了积分形式的几何衰减因子表达式,数值模拟比较了Blinn几何衰减因子与修正后的积分型衰减因子以及对应的BRDF模型曲线.结果表明:提出的几何衰减因子在物理合理性以及模拟精度方面都有明显提升,使BRDF模型曲线与已有BRDF数据之间的标准误差由0.0636减小到0.0084.
基金financially supported by the National Key R&D Program of China (No.2018YFA0707300)the Natural Science Foundation of Shanxi Province,China (No.201801D221131)+2 种基金the National Natural Science Foundation of China (Nos.51905372,51904206,51805359,52075359)Shanxi Province Science and Technology Major Project,China (No.20181102011)China Postdoctoral Science Foundation (No.2020M670705)。
文摘Ti/Cu/Ti laminated composites were fabricated by corrugated rolling(CR) and flat rolling(FR) method.Microstructure and mechanical properties of CR and FR laminated composites were investigated by scanning electron microscopy, numerical simulation methods, peel and tensile examinations. The effect of CR and FR was comparatively analyzed. The results showed that the CR and FR laminated composites exhibited different effective plastic strain distributions of the Ti layer and Cu layer at the interface. The recrystallization texture, prismatic texture and pyramidal texture were developed in the Ti layer by CR, while the R-Goss texture and shear texture were developed in the Cu layer by CR. The typical deformation texture components were developed in the Ti layer and Cu layer of FR laminated composites. The CR laminated composites had higher bond strength, tensile strength and ductility.
基金supported by the Natural Science Foundation of Jiangsu Province of China (No. BK20141407)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘Based on the bulk free energy density and the degenerate mobility constructed by the quartic double-well potential function,a phase field model is established to simulate the evolution of intragranular microvoids due to surface diffusion in a stress field.The corresponding phase field governing equations are derived.The evolution of elliptical microvoids with different stressesΛ,aspect ratiosβand linewidths hˉis calculated using the mesh adaptation finite element method and the reliability of the procedure is verified.The results show that there exist critical values of the stressΛc,the aspect ratioβc and the linewidth hˉc of intragranular microvoids under equivalent biaxial tensile stress.When Λ≥Λ_(c),β≥β_(c) or h≤h_(c),the elliptical microvoids are instable with an extending crack tip.WhenΛ<Λ_(c),β<β_(c) or hˉ>h_(c),the elliptical microvoids gradually cylindricalize and remain a stable shape.The instability time decreases with increasing the stress or the aspect ratio,while increases with increasing the linewidth.In addition,for the interconnects containing two elliptical voids not far apart,the stress will promote the merging of the voids.
基金National Natural Science Foundation ofChina(No.70273029)
文摘The definitions of generalized pseudoconvex,generalized quasiconvex and its stri ctly generalized convexity were presented for the static programming at locally star -shaped set using the concept of right-upper derivative and the concept of sub linear. The sufficient and necessary conditions of the static programming were d erived in terms of a generalized Lemma in this paper. The results obtained are u seful for the further study on the duality of static programming and cover many already known conditions.
文摘Physico-chemical composition of sweet orange （Citrus sinensis L.） cv. blood red was determined in relation to different storage conditions and micronutrients application at department of horticulture, Agricultural University Peshawar, Pakistan during 2006-2007 and 2007-2008. The post-harvest quality of sweet orange was evaluated for 60 days storage with 20 days intervals. Fruit were harvested after the foliar application of zinc and boron in two consecutive seasons. The harvested fruits were stored at an ambient temperature （ATS） of 25 ＋ 2 ℃ and at low temperature storage （LTS） of 15 ± 2 ℃ with 60%-70% relative humidity （RH） for 60 days. Sweet oranges stored at LTS maintained better fruit quality than ATS. The foliar application of zinc and boron significantly enhanced fruit juice content, total soluble solids （TSS）, ascorbic acid （AA） and non-reducing sugar （NRS） of fruit. However, fruit juice content, TSS and AA were observed significantly higher, when the fruit was treated with high zinc （1%） and low boron （0.02%）. The percent of weight loss, disease incidence, TSS and reducing sugar （RS） increased with increasing the storage durations. A reduction was noted in fruit juice, AA and NRS with increasing the storage durations.
基金supported by the National Natural Science Foundation of China(21405080)the Natural Science Foundation of Jiangsu Province(BK20150013,BK20140592)
文摘Molar concentration of gold nanoparticles is one of the most critical parameters of gold colloids in order to develop their applications in sensing, diagnostics and nanomedicine. Previous methods often stand just for gold nanoparticles with regular shape and narrow size distribution. In the present work, we proposed an absolute quantification method that determined the molar concentration of gold nanoparticles with arbitrary shapes and polydisperse sizes. This approach involved the real time monitoring and counting of individual nanoparticles collision events, from which the quantification of molar concentration was achieved using a theoretical model consisting of Fiek＇s laws of diffusion and Stokes-Einstein equation. The determination of spherical gold nanoparticles concentration resulted in excellent agreement with traditional spectrometry method. It was further demonstrated that the present approach can be expanded to determine the molar concentration of gold nanoparticles with arbitrary shapes and poly-diversed distributions.
文摘Purpose： This study aims to explore the biomechanical mechanism of lower limb injuries to the driver by establishing a finite element （FE） simulation model of collisions. Methods： First a minibus FE model was integrated with a seat belt system. Then it was used to rebuild two collisions together with the total human model for safety （THUMS） provided by Toyota Motor Corporation： a rear-end collision between a minibus and a truck and a head-on collision of a minibus to a rigid wall. The impact velocities of both collisions were set at 56 km/h. The vehicle dynamic response, vehicle deceleration, and dashboard intrusion in the two collisions were compared. Results： In the minibus rear-end truck collision, the peak values of the yon Mises equivalent stress at the tibia and the femur were 133 MPa and 126 MPa respectively; while in the minibus head-on rigid wall collision, the data were 139 MPa and 99 MPa. Compared with the minibus head-on rigid wall collision, the vehicle deceleration was smaller and the dashboard intrusion was larger in the minibus rear-end truck collision. Conclusion： The results illustrate that a longer dashboard incursion distance corresponds to a higher yon Mises equivalent stress at the femur. The simulation results are consistent with the driver＇s autopsy report on lower limbs injuries. These findings verify that FE simulation method is reliable and useful to analyze the mechanisms of lower limb iniuries to the driver in minibus frontal collisions.
基金supported by the National Natural Science Foundation of China (21176164, 21336005)the Chinese-Singapore Joint Project (2012DFG41900)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘Adjusting the spacers between the electron-acceptor and the elector-donor is important to design organic ternary memory material but rarely reported. In this paper, two small molecules, ZIPGA and ZIPCAD with benzene ring or triphenylamine as the spacers, were designed and synthesized to fabricate memory devices. The A1/ZIPGA/indium-tin oxide （ITO） device showed ternary characteristics, whereas A1/ZIPCAD/ITO had no obvious memory characteristics. Density functional theory calculation, X-ray diffraction （XRD） and atomic force microscopy （AFM） were employed to interpret the different memory properties. ZIPGA thin film has the closer intermolecular packing and flatter surface morphology than ZIPCAD film, which was favorable to the electron migration. This work demonstrates the importance of spacers and reveals that triphenylamine may be not a good spacer in design of new memory material.
