建立了一种μ-QuEChERS结合气相色谱-三重四极杆串联质谱仪(gas chromatography-triple quadrupole tandem mass spectrometry,GC-MS/MS)在10 min内测定桃胶中106种农药残留的方法。样品经μ-QuEChERS方法提取、净化,经超高惰性气相色谱...建立了一种μ-QuEChERS结合气相色谱-三重四极杆串联质谱仪(gas chromatography-triple quadrupole tandem mass spectrometry,GC-MS/MS)在10 min内测定桃胶中106种农药残留的方法。样品经μ-QuEChERS方法提取、净化,经超高惰性气相色谱柱(highly inert gas chromatographic column,HIGC)分离,以三重四极杆-串联质谱仪检测分析,基质标准曲线外标法定量。106种农药在0.00200~0.400 mg/kg范围,其线性相关系数R均大于0.995,对于0.500 g样品的106种农药的检出限为(5.84×10^(-6))~(2.81×10^(-3))mg/kg,定量限为(1.95×10^(-5))~(9.36×10^(-3))mg/kg,且低、中、高3个浓度添加水平的回收率为72%~109%,相对标准偏差(relative standard deviations,RSDs)为0.73%~10%。该方法具有快捷、污染小、可靠性强的特点,适用于桃胶中多种农药残留的快速定性和定量检测。展开更多
The corrosion behavior and microstructure characteristics of metal inert gas(MIG)welded dissimilar joints of the 6005A alloy modified with Sc(designated as 6005A+Sc)and the 5083 alloy were investigated using corrosion...The corrosion behavior and microstructure characteristics of metal inert gas(MIG)welded dissimilar joints of the 6005A alloy modified with Sc(designated as 6005A+Sc)and the 5083 alloy were investigated using corrosion tests and microscopy techniques.Results show that the dissimilar joints exhibit strong stress corrosion cracking(SCC)resistance,maintaining substantial strength during slow strain rate tensile tests.Notably,the heat-affected zone(HAZ)and base metal(BM)on the 6005A+Sc side show superior performance in terms of inter-granular corrosion(IGC)and exfoliation corrosion(EXCO)compared to the corresponding zones on the 5083 side.The lower corrosion resistance of the 5083-BM and the 5083-HAZ can be attributed to the presence of numerous Al_(2)Mg_(3)phases and micro-scaled Al_(6)(Mn,Fe)intermetallics,mainly distributed along the rolling direction.Conversely,the enhanced corrosion resistance of the 6005A+Sc-BM and the 6005A+Sc-HAZ can be attributed to the discontinuously distributed grain boundary precipitates(β-Mg_(2)Si),the smaller grain size,and the reduced corrosive current density.展开更多
文摘建立了一种μ-QuEChERS结合气相色谱-三重四极杆串联质谱仪(gas chromatography-triple quadrupole tandem mass spectrometry,GC-MS/MS)在10 min内测定桃胶中106种农药残留的方法。样品经μ-QuEChERS方法提取、净化,经超高惰性气相色谱柱(highly inert gas chromatographic column,HIGC)分离,以三重四极杆-串联质谱仪检测分析,基质标准曲线外标法定量。106种农药在0.00200~0.400 mg/kg范围,其线性相关系数R均大于0.995,对于0.500 g样品的106种农药的检出限为(5.84×10^(-6))~(2.81×10^(-3))mg/kg,定量限为(1.95×10^(-5))~(9.36×10^(-3))mg/kg,且低、中、高3个浓度添加水平的回收率为72%~109%,相对标准偏差(relative standard deviations,RSDs)为0.73%~10%。该方法具有快捷、污染小、可靠性强的特点,适用于桃胶中多种农药残留的快速定性和定量检测。
基金financially supported by the Science and Technology Innovation Program of Hunan Province,China(No.2023RC3055)the Natural Science Foundation of Hunan Province,China(Nos.2023JJ30671,2020JJ4114)+5 种基金the Natural Science Foundation of Changsha City,China(No.Kq2208264)National Key Project of Research and Development Plan of China(Nos.2021YFC1910505,2021YFC1910504)the Young Core Teacher Foundation of Hunan Province,China(No.150220001)Key Research and Development Program of Guangdong Province,China(No.2020B010186002)the National Natural Science Foundation of China(No.51601229)the Key-Area Research and Development Program of Foshan City,China(No.2230032004640).
文摘The corrosion behavior and microstructure characteristics of metal inert gas(MIG)welded dissimilar joints of the 6005A alloy modified with Sc(designated as 6005A+Sc)and the 5083 alloy were investigated using corrosion tests and microscopy techniques.Results show that the dissimilar joints exhibit strong stress corrosion cracking(SCC)resistance,maintaining substantial strength during slow strain rate tensile tests.Notably,the heat-affected zone(HAZ)and base metal(BM)on the 6005A+Sc side show superior performance in terms of inter-granular corrosion(IGC)and exfoliation corrosion(EXCO)compared to the corresponding zones on the 5083 side.The lower corrosion resistance of the 5083-BM and the 5083-HAZ can be attributed to the presence of numerous Al_(2)Mg_(3)phases and micro-scaled Al_(6)(Mn,Fe)intermetallics,mainly distributed along the rolling direction.Conversely,the enhanced corrosion resistance of the 6005A+Sc-BM and the 6005A+Sc-HAZ can be attributed to the discontinuously distributed grain boundary precipitates(β-Mg_(2)Si),the smaller grain size,and the reduced corrosive current density.
