In order to improve the accuracy of travel demand forecast and considering the distribution of travel behaviors within time dimension, a trip chaining pattern recognition model was established based on activity purpos...In order to improve the accuracy of travel demand forecast and considering the distribution of travel behaviors within time dimension, a trip chaining pattern recognition model was established based on activity purposes by applying three methods： the support vector machine （SVM） model, the radial basis function neural network （RBFNN） model and the multinomial logit （MNL） model. The effect of explanatory factors on trip chaining behaviors and their contribution to model performace were investigated by sensitivity analysis. Results show that the SVM model has a better performance than the RBFNN model and the MNL model due to its higher overall and partial accuracy, indicating its recognition advantage under a smai sample size scenario. It is also proved that the SVM model is capable of estimating the effect of multi-category factors on trip chaining behaviors more accurately. The different contribution of explanatory, factors to trip chaining pattern recognition reflects the importance of refining trip chaining patterns ad exploring factors that are specific to each pattern. It is shown that the SVM technology in travel demand forecast modeling and analysis of explanatory variable effects is practical.展开更多
Equations that can predict worsted fabrics’ properties such as bending, shearing, compression, surface and tension, were achieved by means of theoretical and experimental studies. By combining these equations with Ka...Equations that can predict worsted fabrics’ properties such as bending, shearing, compression, surface and tension, were achieved by means of theoretical and experimental studies. By combining these equations with Kawabata’s hand and silhouette evaluation methods, a software system was established. Then the mechanical properties, hand and silhouette of a fabric can be predicted quickly and accurately in terms of fiber configurations, yarn and fabric structures. The predictive result if unsatisfied can be revised by the function of “Help for designing modification”.展开更多
The effects of rapid heating cyclic heat treatment on mechanical properties of a TiAl based alloy (Ti 33Al 3Cr) were studied by means of an induction heating machine. The results show that: 1) fine fully lamellar micr...The effects of rapid heating cyclic heat treatment on mechanical properties of a TiAl based alloy (Ti 33Al 3Cr) were studied by means of an induction heating machine. The results show that: 1) fine fully lamellar microstructure with colony size of about 50 μm and lamellar spacing of about 0.12 μm can be obtained; 2) the compression mechanical properties can be improved to a large extent and the best comprehensive compression mechanical properties can reach the yield stress 745 MPa, the large flow stress 1 672 MPa and the compression ratio 19.4%; and 3) the compression fracture at room temperature after induction heat treatment and aging is still typical cleavage fracture.展开更多
The case of a 52-year-old woman with a past history of thymoma resection who presented with chronic diarrhea and generalized edema is the focal point of this article.A diagnosis of Giardia lamblia infection was establ...The case of a 52-year-old woman with a past history of thymoma resection who presented with chronic diarrhea and generalized edema is the focal point of this article.A diagnosis of Giardia lamblia infection was established,which was complicated by protein-losing enteropathy and severely low serum protein level in a patient with no urinary protein loss and normal liver function.After anti-helmintic treatment,there was recovery from hypoalbuminemia,though immunoglobulins persisted at low serum levels leading to the hypothesis of an immune system disorder.Good's syndrome is a rare cause of immunodeficiency characterized by the association of hypogammaglobulinemia and thymoma.This primary immune disorder may be complicated by severe infectious diarrhea secondary to disabled humoral and cellular immune response.This is the first description in the literature of an adult patient with an immunodeficiency syndrome who presented with protein-losing enteropathy secondary to giardiasis.展开更多
When you go to Fashion Week,the talk is all about what’s trending in colors,cuts,hemlines,and finishes.When you go to retail seminars,it＇s about data.And how artificial intelligence（AI）,machine learning,
A surgical manipulator has widely been used for laparoscopic surgery. It has been chosen mainly for the use in supporting human operations and in robot systems like the da Vinci surgical system. These manipulator syst...A surgical manipulator has widely been used for laparoscopic surgery. It has been chosen mainly for the use in supporting human operations and in robot systems like the da Vinci surgical system. These manipulator systems are suitable for careful work, but they have a few problems. One of the problems is that the manipulator is not equipped with haptic sensing functions. Therefore, the operator must know the advanced techniques for visually detecting the physical contact state during surgical operations. These haptic sensing functions thus need to be incorporated into a surgical manipulator. We have developed hydraulic-driven forceps with a micro bearing and a bellows tube that can convey haptic sense to the operator. This system can measure the small forces acting on the tips of the forceps using Pascal＇s principle. A model of the system is provided from the relationship between the internal pressure of the bellows tube and the refraction angles of the forceps. It was confirmed using this model that the developed system makes it possible to estimate both the strength and the direction of the external force applied to the forceps by measuring the internal pressure of the bellows tube. An operator using a three-dimensional haptic device was able to feel the force response during an experiment in which they used the forceps to hold a blood vessel. This report describes the most appropriate method for letting the operator feel the force conveyed by using our system.展开更多
This article describes in detail a technique for model!ng cavity optomechanical field sensors. A magnetic or electric field induces a spatially varying stress across the sensor, which then induces a force on mechanica...This article describes in detail a technique for model!ng cavity optomechanical field sensors. A magnetic or electric field induces a spatially varying stress across the sensor, which then induces a force on mechanical eigenmodes of the system. The force on each oscillator can then be determined from an overlap integral between magnetostrictive stress and the corresponding eigenmode, with the optomechanical coupling strength determining the ultimate resolution with which this force can be detected. Furthermore, an optomechanical magnetic field sensor is compared to other magnetic field sensors in terms of sensitivity and potential for miniaturization. It is shown that an optomechanical sensor can potentially outperform state-of-the-art magnetometers of similar size, in particular other sensors based on a magnetostrictive mechanism.展开更多
基金The Fundamental Research Funds for the Central Universities,the Scientific Innovation Research of College Graduates in Jiangsu Province(No.KYLX_0177)
文摘In order to improve the accuracy of travel demand forecast and considering the distribution of travel behaviors within time dimension, a trip chaining pattern recognition model was established based on activity purposes by applying three methods： the support vector machine （SVM） model, the radial basis function neural network （RBFNN） model and the multinomial logit （MNL） model. The effect of explanatory factors on trip chaining behaviors and their contribution to model performace were investigated by sensitivity analysis. Results show that the SVM model has a better performance than the RBFNN model and the MNL model due to its higher overall and partial accuracy, indicating its recognition advantage under a smai sample size scenario. It is also proved that the SVM model is capable of estimating the effect of multi-category factors on trip chaining behaviors more accurately. The different contribution of explanatory, factors to trip chaining pattern recognition reflects the importance of refining trip chaining patterns ad exploring factors that are specific to each pattern. It is shown that the SVM technology in travel demand forecast modeling and analysis of explanatory variable effects is practical.
文摘Equations that can predict worsted fabrics’ properties such as bending, shearing, compression, surface and tension, were achieved by means of theoretical and experimental studies. By combining these equations with Kawabata’s hand and silhouette evaluation methods, a software system was established. Then the mechanical properties, hand and silhouette of a fabric can be predicted quickly and accurately in terms of fiber configurations, yarn and fabric structures. The predictive result if unsatisfied can be revised by the function of “Help for designing modification”.
文摘The effects of rapid heating cyclic heat treatment on mechanical properties of a TiAl based alloy (Ti 33Al 3Cr) were studied by means of an induction heating machine. The results show that: 1) fine fully lamellar microstructure with colony size of about 50 μm and lamellar spacing of about 0.12 μm can be obtained; 2) the compression mechanical properties can be improved to a large extent and the best comprehensive compression mechanical properties can reach the yield stress 745 MPa, the large flow stress 1 672 MPa and the compression ratio 19.4%; and 3) the compression fracture at room temperature after induction heat treatment and aging is still typical cleavage fracture.
文摘The case of a 52-year-old woman with a past history of thymoma resection who presented with chronic diarrhea and generalized edema is the focal point of this article.A diagnosis of Giardia lamblia infection was established,which was complicated by protein-losing enteropathy and severely low serum protein level in a patient with no urinary protein loss and normal liver function.After anti-helmintic treatment,there was recovery from hypoalbuminemia,though immunoglobulins persisted at low serum levels leading to the hypothesis of an immune system disorder.Good's syndrome is a rare cause of immunodeficiency characterized by the association of hypogammaglobulinemia and thymoma.This primary immune disorder may be complicated by severe infectious diarrhea secondary to disabled humoral and cellular immune response.This is the first description in the literature of an adult patient with an immunodeficiency syndrome who presented with protein-losing enteropathy secondary to giardiasis.
文摘When you go to Fashion Week,the talk is all about what’s trending in colors,cuts,hemlines,and finishes.When you go to retail seminars,it＇s about data.And how artificial intelligence（AI）,machine learning,
文摘A surgical manipulator has widely been used for laparoscopic surgery. It has been chosen mainly for the use in supporting human operations and in robot systems like the da Vinci surgical system. These manipulator systems are suitable for careful work, but they have a few problems. One of the problems is that the manipulator is not equipped with haptic sensing functions. Therefore, the operator must know the advanced techniques for visually detecting the physical contact state during surgical operations. These haptic sensing functions thus need to be incorporated into a surgical manipulator. We have developed hydraulic-driven forceps with a micro bearing and a bellows tube that can convey haptic sense to the operator. This system can measure the small forces acting on the tips of the forceps using Pascal＇s principle. A model of the system is provided from the relationship between the internal pressure of the bellows tube and the refraction angles of the forceps. It was confirmed using this model that the developed system makes it possible to estimate both the strength and the direction of the external force applied to the forceps by measuring the internal pressure of the bellows tube. An operator using a three-dimensional haptic device was able to feel the force response during an experiment in which they used the forceps to hold a blood vessel. This report describes the most appropriate method for letting the operator feel the force conveyed by using our system.
文摘This article describes in detail a technique for model!ng cavity optomechanical field sensors. A magnetic or electric field induces a spatially varying stress across the sensor, which then induces a force on mechanical eigenmodes of the system. The force on each oscillator can then be determined from an overlap integral between magnetostrictive stress and the corresponding eigenmode, with the optomechanical coupling strength determining the ultimate resolution with which this force can be detected. Furthermore, an optomechanical magnetic field sensor is compared to other magnetic field sensors in terms of sensitivity and potential for miniaturization. It is shown that an optomechanical sensor can potentially outperform state-of-the-art magnetometers of similar size, in particular other sensors based on a magnetostrictive mechanism.
