Introduced the coal and rock AE propagation rule,wave guide fixing technics onAE sensors,and AE forecasting coal and rock disaster on the scene and so on,The coaland rock AE propagation rule that follows the exponent ...Introduced the coal and rock AE propagation rule,wave guide fixing technics onAE sensors,and AE forecasting coal and rock disaster on the scene and so on,The coaland rock AE propagation rule that follows the exponent attenuation function on different AEfrequencies,different quality factors and different propagation distances were analyzedand deduced by theory,numerical simulation,and by actual experiment.Consequently,itwas deduced that the coal and rock AE propagation rule follows the exponent attenuationfunction.Based on the correlative theory of wave dynamics and AE sensor,the AE waveguide propagation mechanical model on the sensor fixing manner is found,and the relationsof displacement and speed and acceleration between the AE signal source and theAE signal receiving terminal are presented.The effect of the AE sensor fixing manners oncoal and rock surfaces,coal and rock bottoms and wave guides were studied by actualexperiment.For the results,the effect of the AE sensor fixing manner on wave guides isbetter than on coal and rock surfaces,and was equivalent to the fixing manner on coal androck bottoms.Based on the above study results,actual coal and rock dynamistic disasterswere successfully forecasted.展开更多
In this paper,the force-distance curves have been employed to investigate the force sensing properties of the probe-type microforce sensors.In the preliminary studies,two kinds of probe-type microforce sensors have be...In this paper,the force-distance curves have been employed to investigate the force sensing properties of the probe-type microforce sensors.In the preliminary studies,two kinds of probe-type microforce sensors have been used to load the objects with dry and wetted surfaces.One is a developed piezoresistive cantilever force sensor with sensitivity of 35 μN/V and the other an atomic force microscope(AFM) cantilever beam probe with sensitivity of 10.4 nN/V.The force outputs corresponding to the regimes of approaching,indenting,and loading are obtained,and the properties of the stability in the approaching regime of the sensors,local mechanical behavior of the tested objects in the indenting regime,and the force sensing of the global samples are analyzed.Experimental results of this analysis are also presented.展开更多
The power transformer is the most important equipment of the high voltage power grid, however, some traditional methods of online partial discharge monitoring have some limitations. Based on many advantages of the opt...The power transformer is the most important equipment of the high voltage power grid, however, some traditional methods of online partial discharge monitoring have some limitations. Based on many advantages of the optical fiber sensing technology, we have done some research on fiber optics Fabry-Perot (FP) sensing which can be useful for the transformer on online partial discharge monitoring. This research aimed at improving the reliability of power system safety monitoring. We have done some work as follows: designing a set for fiber optics FP sensor preparation, according to the fabrication procedure strictly making out the sensors, building a reasonable signal demodulation system for fiber optics FP sensing, doing a preliminary analysis about online partial discharge signal monitoring, including the research on different discharge intensities with the same measuring distance and different measuring distances with the same discharge intensity, and then making a detailed analysis of the experimental results.展开更多
The ventilators have been vividly called "the lungs of mine". The rotating blades are the core parts of a ventilator, they can influence the safety and reliability of the ventilator. This paper will use the tip-timi...The ventilators have been vividly called "the lungs of mine". The rotating blades are the core parts of a ventilator, they can influence the safety and reliability of the ventilator. This paper will use the tip-timing method based on the fiber Bragg grating magnetically coupling sensor to study and analyze the ventilator blade vibration, in order to realize long-distance and non-contact real-time online safety monitoring of blade vibration. Compared with the electronic sensorand fiber intensity reflective sensor, the fiber grating coupling magnetic sensor has such advantages as explosion-proof, working at harsh environment with humid air, dust and greasy dirt, capable of achieving long-distance signal transmission, and joining easily with other fiber Bragg grating sensors to form a network in order to achieve multi-parameter distributed online monitoring.展开更多
基金Supported by the Project of National Basic Research Program of China(973 Program)(2005CB221505)the Significant Project of National Natural Science Fund(50534080/E041503)the Project of Coal Mine Gas and Fire Hazard Prevention Major Lab in Henan Province(HKLGF200508)
文摘Introduced the coal and rock AE propagation rule,wave guide fixing technics onAE sensors,and AE forecasting coal and rock disaster on the scene and so on,The coaland rock AE propagation rule that follows the exponent attenuation function on different AEfrequencies,different quality factors and different propagation distances were analyzedand deduced by theory,numerical simulation,and by actual experiment.Consequently,itwas deduced that the coal and rock AE propagation rule follows the exponent attenuationfunction.Based on the correlative theory of wave dynamics and AE sensor,the AE waveguide propagation mechanical model on the sensor fixing manner is found,and the relationsof displacement and speed and acceleration between the AE signal source and theAE signal receiving terminal are presented.The effect of the AE sensor fixing manners oncoal and rock surfaces,coal and rock bottoms and wave guides were studied by actualexperiment.For the results,the effect of the AE sensor fixing manner on wave guides isbetter than on coal and rock surfaces,and was equivalent to the fixing manner on coal androck bottoms.Based on the above study results,actual coal and rock dynamistic disasterswere successfully forecasted.
基金supported by the National Natural Science Foundation of China (Grant Nos 10972113 and 10732080)the National Basic Research Program of China (Grant Nos 2007CB936803 and 2010CB631005)SRFDP (Grant No 20070003053)
文摘In this paper,the force-distance curves have been employed to investigate the force sensing properties of the probe-type microforce sensors.In the preliminary studies,two kinds of probe-type microforce sensors have been used to load the objects with dry and wetted surfaces.One is a developed piezoresistive cantilever force sensor with sensitivity of 35 μN/V and the other an atomic force microscope(AFM) cantilever beam probe with sensitivity of 10.4 nN/V.The force outputs corresponding to the regimes of approaching,indenting,and loading are obtained,and the properties of the stability in the approaching regime of the sensors,local mechanical behavior of the tested objects in the indenting regime,and the force sensing of the global samples are analyzed.Experimental results of this analysis are also presented.
基金This work was supported by the National Natural Science Foundation of China (Grant No. 51275373) and the Key Project of National Natural Science Foundation of China (Grant No. 50830230).
文摘The power transformer is the most important equipment of the high voltage power grid, however, some traditional methods of online partial discharge monitoring have some limitations. Based on many advantages of the optical fiber sensing technology, we have done some research on fiber optics Fabry-Perot (FP) sensing which can be useful for the transformer on online partial discharge monitoring. This research aimed at improving the reliability of power system safety monitoring. We have done some work as follows: designing a set for fiber optics FP sensor preparation, according to the fabrication procedure strictly making out the sensors, building a reasonable signal demodulation system for fiber optics FP sensing, doing a preliminary analysis about online partial discharge signal monitoring, including the research on different discharge intensities with the same measuring distance and different measuring distances with the same discharge intensity, and then making a detailed analysis of the experimental results.
文摘The ventilators have been vividly called "the lungs of mine". The rotating blades are the core parts of a ventilator, they can influence the safety and reliability of the ventilator. This paper will use the tip-timing method based on the fiber Bragg grating magnetically coupling sensor to study and analyze the ventilator blade vibration, in order to realize long-distance and non-contact real-time online safety monitoring of blade vibration. Compared with the electronic sensorand fiber intensity reflective sensor, the fiber grating coupling magnetic sensor has such advantages as explosion-proof, working at harsh environment with humid air, dust and greasy dirt, capable of achieving long-distance signal transmission, and joining easily with other fiber Bragg grating sensors to form a network in order to achieve multi-parameter distributed online monitoring.