The purpose of this paper is to investigate the feasibility of high-frequency induction heat for the line heating process through a series of experimental studies and numerical calculations. The results show that the ...The purpose of this paper is to investigate the feasibility of high-frequency induction heat for the line heating process through a series of experimental studies and numerical calculations. The results show that the heating temperature of induction heating meets the demands of steel plate bending, and the deformation of a steel plate heated by induction heating can achieve the same effect as flame heating. Meanwhile, the finite element model of moving induction heating of the plate is developed, and the comparison of the residual strain fields and transverse shrinkage between these two kinds of heating shows that great similarity has been achieved.展开更多
For Gu-Ag alloy, an important parameter called workability in the forming process of materials can be evaluated by processing maps yielded from the stress-strain data generated by hot compression tests at temperatures...For Gu-Ag alloy, an important parameter called workability in the forming process of materials can be evaluated by processing maps yielded from the stress-strain data generated by hot compression tests at temperatures of 700-850 °C and strain rates of 0.01-10 s-1. And at the true strain of 0.15, 0.35 and 0.55, respectively, the responses of strain-rate sensitivity, power dissipation efficiency and instability parameter to temperature and strain rate were studied. Instability maps and power dissipation maps were superimposed to form processing maps, which reveal the determinate regions where individual metallurgical processes occur and the limiting conditions of flow instability regions. Furthermore, the optimal processing parameters for bulk metal working are identified clearly by the processing maps.展开更多
The effects of rapid heating cyclic heat treatment on mechanical properties of a TiAl based alloy (Ti 33Al 3Cr) were studied by means of an induction heating machine. The results show that: 1) fine fully lamellar micr...The effects of rapid heating cyclic heat treatment on mechanical properties of a TiAl based alloy (Ti 33Al 3Cr) were studied by means of an induction heating machine. The results show that: 1) fine fully lamellar microstructure with colony size of about 50 μm and lamellar spacing of about 0.12 μm can be obtained; 2) the compression mechanical properties can be improved to a large extent and the best comprehensive compression mechanical properties can reach the yield stress 745 MPa, the large flow stress 1 672 MPa and the compression ratio 19.4%; and 3) the compression fracture at room temperature after induction heat treatment and aging is still typical cleavage fracture.展开更多
The effect of incorporating limited-diffusivity elements such as Fe and Ti on thermal stability of the nanocrystalline Al alloy was investigated.Al−10wt.%Fe and Al−10wt.%Fe−5wt.%Ti alloys were fabricated.The initial m...The effect of incorporating limited-diffusivity elements such as Fe and Ti on thermal stability of the nanocrystalline Al alloy was investigated.Al−10wt.%Fe and Al−10wt.%Fe−5wt.%Ti alloys were fabricated.The initial mixtures of powders were milled for 100 h in vacuum.The bulk samples were fabricated from the milled powders in a high frequency induction heat sintering(HFIHS)system.The milled powders and the bulk sintered samples were characterized by X-ray diffraction(XRD),Vickers microhardness,field emission scanning electron microscopy(FESEM-EDS)and transmission electron microscopy(TEM).The observations indicated that Fe and Ti were completely dispersed in the matrix to form a supersaturated solid solution(SSSS)with Al.Additionally,the inclusion of alloying elements led to an increase in hardness and yield strength of the alloy by 127%and 152%,respectively.The elevated temperature compression tests were carried out to evaluate the thermal stability of the alloys.The Al−10wt.%Fe−5wt.%Ti alloy revealed the optimum thermally stable behavior of the three alloys studied.The incorporation of Fe and Ti improved the thermal stability of the developed alloys through inhibiting the grain growth,hindering dissolution and growth of second phases(such as Al13Fe4 and Al13Ti),and forming a stable solid solution.展开更多
The nanoscale effect enables the unique magnetic,optical,thermal and electrical properties of nanostructured materials and has attracted extensive investigation for applications in catalysis,biomedicine,sensors,and en...The nanoscale effect enables the unique magnetic,optical,thermal and electrical properties of nanostructured materials and has attracted extensive investigation for applications in catalysis,biomedicine,sensors,and energy storage and conversion.The widely used synthesis methods,such as traditional hydrothermal reaction and calcination,are bulk heating processes based on thermal radiation.Differing from traditional heating methods,non-thermal radiation heating technique is a local heating mode.In this regard,this review summarizes various non-thermal radiation heating methods for synthesis of nanomaterials,including microwave heating,induction heating,Joule heating,laser heating and electron beam heating.The advantages and disadvantages of these non-thermal radiation heating methods for the synthesis of nanomaterials are compared and discussed.Finally,the future development and challenges of non-thermal radiation heating method for potential synthesis of nanomaterials are discussed.展开更多
基金Supported by the National Natural Science Foundation of China (50805016)
文摘The purpose of this paper is to investigate the feasibility of high-frequency induction heat for the line heating process through a series of experimental studies and numerical calculations. The results show that the heating temperature of induction heating meets the demands of steel plate bending, and the deformation of a steel plate heated by induction heating can achieve the same effect as flame heating. Meanwhile, the finite element model of moving induction heating of the plate is developed, and the comparison of the residual strain fields and transverse shrinkage between these two kinds of heating shows that great similarity has been achieved.
基金Project(CSTC2009BA4065) supported by the Chongqing Natural Science Foundation,China
文摘For Gu-Ag alloy, an important parameter called workability in the forming process of materials can be evaluated by processing maps yielded from the stress-strain data generated by hot compression tests at temperatures of 700-850 °C and strain rates of 0.01-10 s-1. And at the true strain of 0.15, 0.35 and 0.55, respectively, the responses of strain-rate sensitivity, power dissipation efficiency and instability parameter to temperature and strain rate were studied. Instability maps and power dissipation maps were superimposed to form processing maps, which reveal the determinate regions where individual metallurgical processes occur and the limiting conditions of flow instability regions. Furthermore, the optimal processing parameters for bulk metal working are identified clearly by the processing maps.
文摘The effects of rapid heating cyclic heat treatment on mechanical properties of a TiAl based alloy (Ti 33Al 3Cr) were studied by means of an induction heating machine. The results show that: 1) fine fully lamellar microstructure with colony size of about 50 μm and lamellar spacing of about 0.12 μm can be obtained; 2) the compression mechanical properties can be improved to a large extent and the best comprehensive compression mechanical properties can reach the yield stress 745 MPa, the large flow stress 1 672 MPa and the compression ratio 19.4%; and 3) the compression fracture at room temperature after induction heat treatment and aging is still typical cleavage fracture.
文摘The effect of incorporating limited-diffusivity elements such as Fe and Ti on thermal stability of the nanocrystalline Al alloy was investigated.Al−10wt.%Fe and Al−10wt.%Fe−5wt.%Ti alloys were fabricated.The initial mixtures of powders were milled for 100 h in vacuum.The bulk samples were fabricated from the milled powders in a high frequency induction heat sintering(HFIHS)system.The milled powders and the bulk sintered samples were characterized by X-ray diffraction(XRD),Vickers microhardness,field emission scanning electron microscopy(FESEM-EDS)and transmission electron microscopy(TEM).The observations indicated that Fe and Ti were completely dispersed in the matrix to form a supersaturated solid solution(SSSS)with Al.Additionally,the inclusion of alloying elements led to an increase in hardness and yield strength of the alloy by 127%and 152%,respectively.The elevated temperature compression tests were carried out to evaluate the thermal stability of the alloys.The Al−10wt.%Fe−5wt.%Ti alloy revealed the optimum thermally stable behavior of the three alloys studied.The incorporation of Fe and Ti improved the thermal stability of the developed alloys through inhibiting the grain growth,hindering dissolution and growth of second phases(such as Al13Fe4 and Al13Ti),and forming a stable solid solution.
基金supported by Taishan Scholars Project Special Funds(tsqn201812083)the Natural Science Foundation of Shandong Province(ZR2019YQ20,ZR2019BEM022,and 2019JMRH0410)the National Natural Science Foundation of China(51972147)。
文摘The nanoscale effect enables the unique magnetic,optical,thermal and electrical properties of nanostructured materials and has attracted extensive investigation for applications in catalysis,biomedicine,sensors,and energy storage and conversion.The widely used synthesis methods,such as traditional hydrothermal reaction and calcination,are bulk heating processes based on thermal radiation.Differing from traditional heating methods,non-thermal radiation heating technique is a local heating mode.In this regard,this review summarizes various non-thermal radiation heating methods for synthesis of nanomaterials,including microwave heating,induction heating,Joule heating,laser heating and electron beam heating.The advantages and disadvantages of these non-thermal radiation heating methods for the synthesis of nanomaterials are compared and discussed.Finally,the future development and challenges of non-thermal radiation heating method for potential synthesis of nanomaterials are discussed.
