期刊文献+
共找到58篇文章
< 1 2 3 >
每页显示 20 50 100
感耦等离子体发射光谱法研究土壤-铁芒萁系统中稀土元素的分布、累积和迁移特征 被引量:20
1
作者 魏正贵 宛寿康 +5 位作者 张巽 洪法水 赵贵文 陶冶 汪振立 谢先求 《应用生态学报》 CAS CSCD 2001年第6期863-866,共4页
用感耦等离子体发射光谱法 (ICP AES)测定了江西赣南地区非稀土矿区和 4处不同稀土矿区内 ,土壤 铁芒萁系统中La、Ce、Pr、Nd、Sm、Gd、Dy、Yb和Y的含量 ,并对其在土壤剖面层及铁芒萁植物体内的分布、迁移特征进行了研究 .结果表明 ,土... 用感耦等离子体发射光谱法 (ICP AES)测定了江西赣南地区非稀土矿区和 4处不同稀土矿区内 ,土壤 铁芒萁系统中La、Ce、Pr、Nd、Sm、Gd、Dy、Yb和Y的含量 ,并对其在土壤剖面层及铁芒萁植物体内的分布、迁移特征进行了研究 .结果表明 ,土壤剖面层的底土层含量最高 ,但表土层铈相对富集 .稀土元素总量 (ΣREE)在铁芒萁植物体内的分布规律是叶 >根 >茎 >叶柄 ,单一稀土元素的分布规律各异 ,La、Ce、Pr、Nd的分布规律表现为 :叶 >根 >茎 >叶柄 ;Sm和Gd在不同采样点表现为叶 >根 >茎 >叶柄或根 >叶 >茎 >叶柄 ;Dy、Yb和Y均有 3种不同的分布模式 :叶 >根 >茎 >叶柄、根 >叶 >茎 >叶柄及根 >茎 >叶 >叶柄 .稀土元素在铁芒萁体内的迁移过程中 ,发生了明显的分馏作用 ,茎、叶柄、叶中的重稀土相对贫乏 . 展开更多
关键词 等离子体发射光谱 稀土元素 土壤 铁芒萁 分布 迁移 积累 稀土污染 稀土富集
下载PDF
感耦等离子体发射光谱法测定原油中痕量铁镍铜钒 被引量:22
2
作者 吴建之 沈大可 沈尧汝 《岩矿测试》 CAS CSCD 北大核心 1999年第1期58-61,共4页
系统地试验了用感耦等离子体发射光谱同时测定原油中痕量元素Fe、Ni、Cu和V的多种前处理方法,制定出H2SO4、HNO3分步炭化,500℃灰化,HCl+HNO3(VHCl∶VHNO3=1∶1)溶解灰分的最佳分解方案。... 系统地试验了用感耦等离子体发射光谱同时测定原油中痕量元素Fe、Ni、Cu和V的多种前处理方法,制定出H2SO4、HNO3分步炭化,500℃灰化,HCl+HNO3(VHCl∶VHNO3=1∶1)溶解灰分的最佳分解方案。该方法的检出限为1.0~6.0μg/L,精密度好,RSD(n=4)<4.6%,加标回收率为96.2%~111%。方法已应用于大庆、苏北、惠州等原油样品的分析。 展开更多
关键词 原油 等离子体发射光谱
下载PDF
感耦等离子体质谱法和发射光谱法测定卡铂-乳酸/羟基乙酸共聚物微球中卡铂含量的研究 被引量:6
3
作者 徐风华 欧阳荔 刘雅琼 《药物分析杂志》 CAS CSCD 北大核心 2006年第6期790-792,共3页
目的:建立感耦等离子体质谱和感耦等离子体发射光谱直接测定卡铂-乳酸/羟基乙酸共聚物微球中卡铂含量的方法,并比较不同的样品前处理方法对测定结果的影响。方法:采用不同方法消化卡铂-乳酸/羟基乙酸共聚物微球,分别采用感耦等离子体质... 目的:建立感耦等离子体质谱和感耦等离子体发射光谱直接测定卡铂-乳酸/羟基乙酸共聚物微球中卡铂含量的方法,并比较不同的样品前处理方法对测定结果的影响。方法:采用不同方法消化卡铂-乳酸/羟基乙酸共聚物微球,分别采用感耦等离子体质谱法和感耦等离子体发射光谱法测定,考察方法的线性、精密度和回收率。结果:微波消化法能够完全消解卡铂-乳酸/羟基乙酸共聚物微球;ICP-AES 法在0.5~10μg·mL^(-1)范围内线性良好,测定标准曲线为 Y=1003.959C+4.126,r=0.9999;仪器进样精密度2.10%,方法精密度为2.10%;平均加标回收率为97.5%±5.72%。ICP-MS 法0.2~20ng·mL^(-1)范围内线性良好,测定标准曲线为 Y=0.1254C+0.0042,r=0.9999;仪器进样精密度0.64%,方法精密度为1.56%;平均加标回收率为102.9%±4.29%。结论:采用微波消化样品的方法,ICP-AES 法和 ICP-MS 法均能比较准确地测定样品中铂含量,但两种方法适用的浓度范围不同,应根据样品浓度选择相应的方法进行含量测定。 展开更多
关键词 等离子体质谱 等离子体发射光谱 卡铂 乳酸/羟基乙酸共聚物微球 含量测定
下载PDF
感耦等离子体发射光谱法测定高纯氧化钇中的痕量稀土元素 被引量:1
4
作者 曾云鹗 张悟铭 +1 位作者 江祖成 郁乃祥 《高等学校化学学报》 SCIE EI CAS 1982年第S01期37-45,共9页
本文采用国产WPG-100型一米光栅摄谱仪、GP3.5-D1型高频等离子体发生器、气动雾化器,以不去溶方式进样直接测定纯度为99.995%的氧化钇中十四个稀土杂质元素。其中除镨(17μg/g)和钸(7μg/g)外,测定下限均为0.3—3μg/g(以氧化物计)。当... 本文采用国产WPG-100型一米光栅摄谱仪、GP3.5-D1型高频等离子体发生器、气动雾化器,以不去溶方式进样直接测定纯度为99.995%的氧化钇中十四个稀土杂质元素。其中除镨(17μg/g)和钸(7μg/g)外,测定下限均为0.3—3μg/g(以氧化物计)。当被测元素的含量为3—17μg/g时,相对标准偏差为2.3—7.3%(钸和镨除外)。样品用盐酸溶解,酸度和共存元素的影响很小,方法简便、快速。 展开更多
关键词 等离子体发生器 等离子体发射光谱 稀土杂质元素 光栅摄谱仪 痕量稀土元素 气动雾化器 共存元素 测定下限
下载PDF
悬浮液雾化进样感耦等离子体基本参数研究Ⅰ.等离子体激发温度测定 被引量:5
5
作者 汪正 邱德仁 +1 位作者 陶光仪 杨芃原 《光谱学与光谱分析》 SCIE EI CAS CSCD 北大核心 2009年第3期793-796,共4页
研究了悬浮液雾化进样感耦等离子体原子发射光谱基本参数——等离子体激发温度。实验用“线为温标线,并采用多谱线法测量溶液雾化进样和0.05%二氧化钛悬浮液雾化进样等离子体激发温度。测定结果显示这两种雾化进样方式的等离子体激... 研究了悬浮液雾化进样感耦等离子体原子发射光谱基本参数——等离子体激发温度。实验用“线为温标线,并采用多谱线法测量溶液雾化进样和0.05%二氧化钛悬浮液雾化进样等离子体激发温度。测定结果显示这两种雾化进样方式的等离子体激发温度接近,为5000-6000K。随感耦等离子体原子发射光谱仪器功率的提高,悬浮液雾化进样等离子体激发温度也相应增大,但增大幅度较小。悬浮液雾化进样等离子体发射光谱分析,若单纯改变仪器功率对于颗粒在等离子体中的原子化效率没有显著的变化,因此对于分析结果没有显著的改善作用。 展开更多
关键词 悬浮液进样 感耦等离子体光谱 等离子体激发温度
下载PDF
悬浮液雾化进样感耦等离子体基本参数研究--Ⅱ等离子体电子密度测定 被引量:3
6
作者 汪正 邱德仁 +1 位作者 陶光仪 杨芃原 《光谱学与光谱分析》 SCIE EI CAS CSCD 北大核心 2009年第5期1402-1404,共3页
研究了悬浮液雾化进样感耦等离子体原子发射光谱基本参数-等离子体电子密度的测定。实验使用Stark效应常用的谱线Hβ线来计算等离子体电子密度。测定结果表明悬浮液雾化进样同水溶液雾化进样感耦等离子体原子发射光谱时等离子体电子密... 研究了悬浮液雾化进样感耦等离子体原子发射光谱基本参数-等离子体电子密度的测定。实验使用Stark效应常用的谱线Hβ线来计算等离子体电子密度。测定结果表明悬浮液雾化进样同水溶液雾化进样感耦等离子体原子发射光谱时等离子体电子密度没有发生显著的变化,数值基本上为1015数量级。固含量高达10%TiO2悬浮液雾化进样等离子体原子发射光谱,电子密度测定结果仅有微小的降低。高固含量悬浮液雾化进样等离子体原子发射光谱没有显著地影响等离子体电子密度,有助于使用高固含量悬浮液雾化进样等离子体原子发射光谱来进行痕量元素分析测定。 展开更多
关键词 悬浮液进样 感耦等离子体光谱 等离子体电子密度
下载PDF
应用感耦等离子体发射光谱法测定矿石中的砷 被引量:2
7
作者 王敏蕾 白小叶 《有色矿冶》 2007年第5期62-64,共3页
本文研究了试样经硝酸和硫酸或氯酸钾和盐酸分解,用ICP发射光谱法测定矿石中砷的方法。通过实验选择了仪器最佳工作条件和分析线对,从各种不同基体成分回收试验结果得出回收率为92%以上。本方法的相对标准偏差在2%~4%之间,结果比较满意。
关键词 等离子体发射光谱 矿石 内标
下载PDF
感耦等离子体原子发射光谱法测定锰钴镍合金中铁和铜
8
作者 王春梅 张淑珍 吴琼 《分析测试仪器通讯》 1995年第2期99-100,共2页
介绍了采用感耦等离子体原子发射光谱测定锰钴镍合金中Fe和Cu杂质元素的方法。实验了基体元素对分析元素的干扰情况,并计算出Mn对Fe的光谱干扰因子。经对模拟样品和实际样品分析表明方法可行。
关键词 等离子体发射光谱(ICP-AES) 合金样品
下载PDF
ICP感耦等离子体原子发射光谱法测定涂料中可溶性汞含量
9
作者 林祥毅 《福建建材》 2004年第1期24-25,共2页
通过选择电感耦合等离子体原子发射光谱仪的最佳工作条件,对内墙涂料中可溶性汞含量进行测定,分析结果满意。回收率在98.5%~101.0%之间,相对标准偏差RSD≤2.7%。与国标规定的方法相比,具有简便快捷的特点。汞的检出限为0.6mg/kg。
关键词 内墙涂料 可溶性汞 痕量元索 ICP等离子体原子发射光谱 测定
下载PDF
WLY 100-1型顺序扫描感耦等离子体光电直读光谱仪的研制
10
作者 陈隆懋 《分析测试仪器通讯》 1995年第2期73-76,共4页
详细介绍了国内第1次研制成功的顺序扫描型感耦等离子体光电直读光谱仪的设计、制造的技术指标与参数以及仪器所采用的新技术与器件。
关键词 等离子体光电直读光谱 顺序扫描 仪器研制
下载PDF
微波消化技术在原子光谱中的应用
11
作者 李芳 《中山大学研究生学刊(自然科学与医学版)》 1998年第3期64-69,共6页
本文简要介绍了微波消化技术的基本原理、设备及其特点,评述了它在原来吸收、感耦等离子体原子发光谱法中的应用情况。
关键词 微波消化 原子吸收光谱 等离子体原子发射光谱
下载PDF
ICP-AES测定蜂胶中12种元素 被引量:14
12
作者 庞海岩 刘晨湘 +1 位作者 朱茜 曾隆强 《广东微量元素科学》 CAS 2002年第4期44-46,共3页
采用全谱直读感耦等离子体发射光谱仪测定了蜂胶及蜂胶制品中的 1 2种元素 。
关键词 蜂胶 ICP-AES 微量元素 测定 中药分析 全谱直读等离子体发射光谱
下载PDF
中药川附子微量重金属元素的分析研究 被引量:26
13
作者 顾兴平 顾永祚 +4 位作者 胡明芬 徐泽民 余秀枝 寇兴明 卢竞 《四川环境》 2002年第3期4-7,共4页
采用ICP -AES法分析中药川附子中 1 7种化学元素 (含重金属 )。通过对潞党参标准样品的分析并与AAS法的结果比较 ,确定了方法的准确度。应用该法弄清川附子用传统工艺炮制前后 ,微量重金属元素的含量及其浓度变化 。
关键词 中药 川附子 重金属元素 等离子体发射光谱 化学分析
下载PDF
中药川附子非金属元素分析 被引量:5
14
作者 卢竞 顾兴平 顾永祚 《四川环境》 2004年第1期50-53,共4页
本文论述了川附子非金属元素的分析:用ICP—AES法测定S、P和Si;离子色谱法测定Cl、S、P;极谱法和HG-AFS法测定痕量砷;ICP-AES和荧光法测定硒;GB法测定氯、氟和碘。应用提出的方法弄清了川附子用传统工艺食盐-胆巴混合溶液炮制前后非金... 本文论述了川附子非金属元素的分析:用ICP—AES法测定S、P和Si;离子色谱法测定Cl、S、P;极谱法和HG-AFS法测定痕量砷;ICP-AES和荧光法测定硒;GB法测定氯、氟和碘。应用提出的方法弄清了川附子用传统工艺食盐-胆巴混合溶液炮制前后非金属元素的含量与浓度变化,从而为中药化学成分进一步研究增添新内容—非金属元素及检测方法。 展开更多
关键词 附子 非金属 等离子体发射光谱 离子色谱 国家标准
下载PDF
Construction of Inorganic Elemental Fingerprint and Multivariate Statistical Analysis of Marine Traditional Chinese Medicine Meretricis concha from Rushan Bay 被引量:6
15
作者 WU Xia ZHENG Kang +2 位作者 ZHAO Fengjia ZHENG Yongjun LI Yantuan 《Journal of Ocean University of China》 SCIE CAS 2014年第4期712-716,共5页
Meretricis concha is a kind of marine traditional Chinese medicine(TCM), and has been commonly used for the treatment of asthma and scald burns. In order to investigate the relationship between the inorganic elemental... Meretricis concha is a kind of marine traditional Chinese medicine(TCM), and has been commonly used for the treatment of asthma and scald burns. In order to investigate the relationship between the inorganic elemental fingerprint and the geographical origin identification of Meretricis concha, the elemental contents of M. concha from five sampling points in Rushan Bay have been determined by means of inductively coupled plasma optical emission spectrometry(ICP-OES). Based on the contents of 14 inorganic elements(Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Se, and Zn), the inorganic elemental fingerprint which well reflects the elemental characteristics was constructed. All the data from the five sampling points were discriminated with accuracy through hierarchical cluster analysis(HCA) and principle component analysis(PCA), indicating that a four-factor model which could explain approximately 80% of the detection data was established, and the elements Al, As, Cd, Cu, Ni and Pb could be viewed as the characteristic elements. This investigation suggests that the inorganic elemental fingerprint combined with multivariate statistical analysis is a promising method for verifying the geographical origin of M. concha, and this strategy should be valuable for the authenticity discrimination of some marine TCM. 展开更多
关键词 Meretricis concha traditional Chinese medicine inorganic elemental fingerprint multivariate statistical analysis Rushan Bay
下载PDF
Inorganic Elemental Determinations of Marine Traditional Chinese Medicine Meretricis concha from Jiaozhou Bay:The construction of Inorganic Elemental Fingerprint Based on Chemometric Analysis 被引量:5
16
作者 SHAO Mingying LI Xuejie +3 位作者 ZHENG Kang JIANG Man YAN Cuiiwe LI Yantuan 《Journal of Ocean University of China》 SCIE CAS 2016年第2期357-362,共6页
The goal of this paper is to explore the relationship between the inorganic elemental fingerprint and the geographical origin identification ofMeretricis concha, which is a commonly used marine traditional Chinese med... The goal of this paper is to explore the relationship between the inorganic elemental fingerprint and the geographical origin identification ofMeretricis concha, which is a commonly used marine traditional Chinese medicine (TCM) for the treatment of asthma and scald bums. For that, the inorganic elemental contents ofMeretricis concha from five sampling points in Jiaozhou Bay have been determined by means of inductively coupled plasma optical emission spectrometry, and the comparative investigations based on the contents of 14 inorganic elements (A1, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Se and Zn) of the samples from Jiaozhou Bay and the previous reported Rushan Bay were performed. It has been found that the samples from the two bays are ap- proximately classified into two kinds using hierarchical cluster analysis, and a four-factor model based on principle component analysis could explain approximately 75% of the detection data, also linear discriminant analysis can be used to develop a prediction model to distinguish the samples from Jiaozhou Bay and Rushan Bay with accuracy of about 93%. The results of the present investi- gation suggested that the inorganic elemental fingerprint based on the combination of the measured elemental content and chemom- etric analysis is a promising approach for verifying the geographical origin ofMeretricis concha, and this strategy should be valuable for the authenticity discrimination of some marine TCM. 展开更多
关键词 Meretricis concha marine traditional Chinese medicine inorganic elemental fingerprint chemometric analysis
下载PDF
Effect and mechanism of dolomite with different size fractions on hematite flotation using sodium oleate as collector 被引量:7
17
作者 罗溪梅 印万忠 +3 位作者 王云帆 孙传尧 马英强 刘建 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第3期529-534,共6页
The effect of dolomite with different particle size fractions on hematite flotation was studied using sodium oleate as collector at p H of about 9. The effect mechanism of dolomite on hematite flotation was investigat... The effect of dolomite with different particle size fractions on hematite flotation was studied using sodium oleate as collector at p H of about 9. The effect mechanism of dolomite on hematite flotation was investigated by means of solution chemistry, ultraviolet spectrophotometry(UV), inductively coupled plasma atomic emission spectrometry(ICP-AES) and X-ray photoelectron spectroscopy(XPS). It is observed that dolomite with different size fractions has depressing effect on hematite flotation using sodium oleate as collector, and dolomite could be the "mineral depressant" of hematite using sodium oleate as collector. The reasons for that are concerned with sodium oleate consumption and the adsorption onto hematite of dissolved species of dolomite. 展开更多
关键词 DOLOMITE HEMATITE sodium oleate mineral dissolution depressing effect
下载PDF
Preparation and Characterization of High Purity Enriched 10B Boric Acid via Anti-Solvent Recrystallization 被引量:2
18
作者 张卫江 刘天雨 徐姣 《Transactions of Tianjin University》 EI CAS 2016年第3期279-283,共5页
Self-made enriched IUB boric acid as raw material was purified by recrystallization. The effects of final crystallization temperature, crystallization time, stirring speed, crystallization frequency and other factors ... Self-made enriched IUB boric acid as raw material was purified by recrystallization. The effects of final crystallization temperature, crystallization time, stirring speed, crystallization frequency and other factors on the purity were investigated. The appropriate operating condition was that the final crystallization temperature and time were 5 ℃ and 10 h respectively under a low-speed stirring for crystallizing twice, which would make the purity and yield of boric acid reach 99.94% and 95.36%, respectively. Taking this as foundation, recrystallization process was optimized with acetone as anti-solvent, whose amount was the most important index. The boric acid solution was added into acetone and recrystallized under the same condition, and the purity and yield of boric acid would reach 99.98% and 99.61%, respectively. The product detected by XRD was confirmed as boric acid crystal. Main ion concentration in the product was detected by ICP, which basically met the national standard of high purity. Crystal morphology of boric acid was observed by SEM. 展开更多
关键词 anti-solvent recrystallization boric acid PURIFICATION CHARACTERIZATION
下载PDF
Distribution,fractionation,and contamination assessment of heavy metals in offshore surface sediments from western Xiamen Bay,China 被引量:2
19
作者 Qiuli Yang Gongren Hu +2 位作者 Ruilian Yu Haixing He Chengqi Lin 《Acta Geochimica》 EI CAS CSCD 2016年第4期355-367,共13页
Surface sediment samples were collected at 21 offshore sites in western Xiamen Bay, Southeast China. Total concentrations of Li, V, Cr, Co, Ni, Cu, Zn, St, Mn, Pb, Ba, Fe, and Ti were determined by inductively coupled... Surface sediment samples were collected at 21 offshore sites in western Xiamen Bay, Southeast China. Total concentrations of Li, V, Cr, Co, Ni, Cu, Zn, St, Mn, Pb, Ba, Fe, and Ti were determined by inductively coupled plasma-optical emission spectrometry; Hg was determined by atomic fluorescence spectrometry. A modified BCR sequential extraction procedure was used to extract fractions of the above elements. Concentrations of Pb, Cr, and Hg at most sites met the primary standard criteria of Marine Sediment Quality except site S12 for Pb and S7 for Cr, while concentrations of Zn at 17 sites and Cu at seven sites exceeded the criteria. The mean concentration of Hg was three times higher than the background, with a possible source being the Jiulong River. Fe, Ti, Ba, Co, V, and Li dominated the residual phase, mainly from terrestrial input. Ni, Cr, Pb, and Hg in the non-residual phase varied largely between sites. Sr, Mn, Cu, and Zn were mainly in the non- residual fraction. Most sites showed considerable ecological risk; exceptions were site S7 (very high) and sites S10, S11, and S14 (moderate). Cu showed moderate-to-high pollution and Pb exhibited no-to-low pollution, while other metals had a non-pollution status according to their ratios of secondary phase to primary phase (RSP). Results of two assessment methods showed moderate pollution and a very high ecological risk for Cu, Zn, Ni, and Cr at site S7, which might be due to the local sewage treatment plant. 展开更多
关键词 Heavy metal Fractionation - Assessment Sediments DISTRIBUTION Western Xiamen Bay
下载PDF
A Novel γ-Alumina Supported Fe-Mo Bimetallic Catalyst for Reverse Water Gas Shift Reaction 被引量:10
20
作者 Abolfazl Gharibi Kharaji Ahmad Shariati Mohammad Ali Takassi 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2013年第9期1007-1014,共8页
In reverse water gas shift (RWGS) reaction COa is converted to CO which in turn can be used to pro- duce beneficial chemicals such as methanol. In the present study, Mo/AlaO3, Fe/AlaO3 and Fe-Mo/Al2O3 catalysts were... In reverse water gas shift (RWGS) reaction COa is converted to CO which in turn can be used to pro- duce beneficial chemicals such as methanol. In the present study, Mo/AlaO3, Fe/AlaO3 and Fe-Mo/Al2O3 catalysts were synthesised using impregnation method. The structures of catalysts were studied using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) method, inductively coupled plasma atomic emission spectrometer (ICP-AES), temperature programmed reduction (H2-TPR), CO chemisorption, energy dispersive X-ray (EDX) and scanning electron microscopy (SEM) techniques. Kinetic properties of all catalysts were investigated in a batch re- actor for RWGS reaction. The results indicated that Mo existence in structure of Fe-Mo/AlzO3 catalyst enhances its activity as compared to Fe/AlaO3. This enhancement is probably due to better Fe dispersion and smaller particle size of Fe species. Stability test of Fe-Mo/AlzO3 catalyst was carried out in a fixed bed reactor and a high CO yield for 60 h of time on stream was demonstrated. Fez(MoO4)3 phase was found in the structures of fresh and used catalysts. TPR results also indicate that Fez(MoO4)3 phase has low reducibility, therefore the Fe2(MoO4)3 phase significantly inhibits the reduction of the remaining Fe oxides in the catalyst, resulted in high stability of Fe-Mo/Al2O3 catalyst. Overall, this study introduces Fe-Mo/Al2O3 as a novel catalyst with high CO yield, almost no by-products and fairly stable for RWGS reaction. 展开更多
关键词 reverse water gas shift reaction Fe-Mo/Al2O3 catalyst SELECTIVITY stability REDUCIBILITY
下载PDF
上一页 1 2 3 下一页 到第
使用帮助 返回顶部