期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
室温慢速固化丙烯酸酯胶黏剂的制备 被引量:3
1
作者 张恩天 陈维君 李刚 《化学与粘合》 CAS 2005年第5期311-312,共2页
第二代丙烯酸酯胶黏剂(SGA)由于具有室温快速固化和可进行带油表面的胶接等一系列优点,得到极大的推广应用。但其由于受氧化-还原催化固化体系的影响,也存在许多弊病,例如适用期短、贮存不稳定、一次性配胶量不能太多等,使其在很多技术... 第二代丙烯酸酯胶黏剂(SGA)由于具有室温快速固化和可进行带油表面的胶接等一系列优点,得到极大的推广应用。但其由于受氧化-还原催化固化体系的影响,也存在许多弊病,例如适用期短、贮存不稳定、一次性配胶量不能太多等,使其在很多技术领域内的应用受到限制。本研究针对铅酸电池行业壳体与口盖的胶接和极柱灌封需要,开发出一种新的丙烯酸酯胶黏剂氧化-还原催化固化体系,其特点是氧化-还原催化固化体系中的还原剂可在胶黏剂配制后就地生成且随着固化进程的开始,不断被消耗,从而可以保证整个固化进程平稳进行,当一次配胶量达到12 g时,固化时间为1 h,固化体系最高放热不超过50℃,从而圆满地实现了用氧化-还原催化剂固化的丙烯酸酯胶黏剂体系在灌封方面的应用。 展开更多
关键词 丙烯酸酯胶黏剂 制备方法 室温 慢速固化 合成工艺
原文传递
Effects of precipitation strengthening heat treatment for Al-Mg alloy 被引量:1
2
作者 Seong-Jong KIM Seok-Ki JANG +2 位作者 Min-Su HAN Seong-Kwon KIM Jong-Sin KIM 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2011年第6期1218-1224,共7页
The corrosions resulting from defects in painting layers frequently occur in Al alloys, so the application of corrosion preventing systems is also very important. Optimum conditions in terms of electrochemistry in rel... The corrosions resulting from defects in painting layers frequently occur in Al alloys, so the application of corrosion preventing systems is also very important. Optimum conditions in terms of electrochemistry in relation to solution treatment, quenching and artificial aging treatment were established in order to optimize precipitation strengthening conditions intended to enhance the strength of Al alloys. Slow strain rate tests (SSRT) at various applied potentials were conducted in potential range from -1.8 to 0.5 V. The results show that the maximum tensile strengths, elongations and time-to-fracture are shown to be high values. After precipitation strengthening heat treatment, a tendency appear that time-to-fracture increases as elongation increases. In the potential range from -1.3 V to -0.7 V, the specimens show excellent mechanical properties, and thus this range is considered to be a corrosion prevention range. 展开更多
关键词 Al alloy slow strain rate test ELECTROCHEMISTRY precipitation strengthening heat treatment mechanical property
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部