[Objective]The aim was to explore effects of curing technique parameters on chemical components and aromatic material accumulation to formulate a suitable curing technique and for and to achieve tobacco scalding, dryi...[Objective]The aim was to explore effects of curing technique parameters on chemical components and aromatic material accumulation to formulate a suitable curing technique and for and to achieve tobacco scalding, drying and giving aromat- ic flavor. [Method] With tobacco variety KRK 26 as test materials, the test involved parameters of three curing-techniques in down, middle and upper parts of flue-cured tobaccos in an oven to measure chemical components and aromatic substances in tobaccos. [Result] The effects of curing techniques on total sugar and reducing sug- ar differed upon temperature and humidity. The contents of chemical components, such as total alkaloid, total N and the ratio of sugar/ alkali by moderate temperature and high humidity technique were of significant differences with those by moderate temperature and moderate humidity technique and with low temperature and low hu- midity technique; the chemical components by moderate temperature and moderate humidity were of insignificant differences with the treatment by low temperature and low humidity technique. Total amount of aroma components by different curing tech- niques from high to low was the treatment by low temperature and low humidity technique （461.72 μg/g）, the treatment by moderate temperature and moderate hu- midity technique （450.06μg/g） and the treatment by moderate temperature and high humidity technique （385.12μg/g）, suggesting the content of aromatic substances is high at low temperature and low humidity. [Conclusion] Moderate temperature and high humidity curing technique has significant effects on total alkaloid, total N and the ratio of sugar/ alkali of tobaccos and different curing techniques also affect the total amount of aromatic substances of flue-cured tobaccos.展开更多
[Objective] The aim was to analyze sugar components in fermented rice wine by ion chromatography. [Method] The optimal condition for chromatography system of sugar analysis was selected by measuring sugars in fermente...[Objective] The aim was to analyze sugar components in fermented rice wine by ion chromatography. [Method] The optimal condition for chromatography system of sugar analysis was selected by measuring sugars in fermented rice wine with ion chromatography and pulsed amperometric detection. [Result] The optimal measurement conditions were as follows： Leacheate （Leachate）, consisting of NaOH and CH3COONa, was eluted by gradient concentrations, with column temperature at 35 ℃ and flow rate at 0.4 ml/min. In the condition, sugars in rice wine were ana- lyzed and the results showed that the method is featured by low detection limit, good repetition and high recovery rate. [Conclusion] The research establishes and determines the approaches and optimum conditions for sugar analysis in rice wine by ion chromatography and pulsed amperometric detection, providing references for advancement of research on quality improvement of fermented rice wine.展开更多
Betulin, which is a medicinal pentacyclic triterpene, is abundant in the bark of white birch (Betula platyphlly). The bark of birch was collected at Tayuan Forest Farm of Jiagedaqi, Heilongjiang Province in September ...Betulin, which is a medicinal pentacyclic triterpene, is abundant in the bark of white birch (Betula platyphlly). The bark of birch was collected at Tayuan Forest Farm of Jiagedaqi, Heilongjiang Province in September 2000. Supercritical fluid extraction (SFE) that is a new separation technology has been used for the processing pharmaceutical and natural products. In this paper, the extraction of betulin from the bark of birch by supercritical CO2 extraction was studied. The authors investigated and analyzed a few parameters such as modifier dosage, extraction pressure and extraction temperature. The optimal extrac-tion conditions showed that the modifier dosage used for per gram bark powder was 1.5 mL, the extraction pressure was at 20 Mpa, and the extraction temperature was at 55 C. The velocity of flow of liquid CO2 was at 10 kg/h. The pressure and tem-perature in separation vessel were at 5.5 Mpa and 50 C, respectively.展开更多
A mathematical model of resin flow and temperature variation in the filling stage of the resin transfer molding (RTM) is developed based on the control volume/finite element method (CV/FEM). The effects of the heat tr...A mathematical model of resin flow and temperature variation in the filling stage of the resin transfer molding (RTM) is developed based on the control volume/finite element method (CV/FEM). The effects of the heat transfer and chemical reaction of the resin on the flow and temperature are considered. The numerical algorithm of the resin flow and temperature variation in the process of RTM are studied. Its accuracy and convergence are analyzed. The comparison of temperature variations between experimental results and model predictions is carried out for two RTM cases. Result shows that the model is efficient for evaluating the flow and temperature variation in the filling stage of RTM and there is a good coincidence between theory and experiment.展开更多
Investigations were conducted to quantify litterfall, and litter and nutrient accumulation in forest floor, and to acquire information on litter decomposition and nitrogen and phosphorus release patterns in three diff...Investigations were conducted to quantify litterfall, and litter and nutrient accumulation in forest floor, and to acquire information on litter decomposition and nitrogen and phosphorus release patterns in three different subalpine coniferous forests, a plantation （P1）, a secondary forest （SF）, and a primitive forest （PF）, in western Sichuan, China. The litter trap method was used to evaluate litterfall with the litterbag method being utilized for litter decomposition. Seasonal patterns of litterfall were similar in the three forests, with two peaks occurring in September-November and March-May. The plantation revealed an annual litterfall of 4.38 x 103 kg ha-1, which was similar to those of SF and PF, but P1 had a lower mass loss rate and a higher C/N ratio. The C/N ratio may be a sound predictor for the decomposition differences. N concentrations of leaf litter in both the secondary forest and primitive forest increased first and then decreased, and the percentages of their final/initial values were 108.9% and 99.9%, respectively. P concentration in the three forests increased by the end of the study. The results of litterfall and decomposition indicated that in the plantation the potential to provide nutrients for soil organic matter was similar to those of SF and PF; however, its slower decomposition rate could result in a somewhat transient accumulation of litter in the forest floor.展开更多
Datong coal was extracted with CS2, n-hexane, benzene, methanol, acetone, tetrahydro-furan（THF） and THF/methanol（1：3,v/v） mixed solvent sequentially. The extracts were analyzed with GC/MS. It is presented that gr...Datong coal was extracted with CS2, n-hexane, benzene, methanol, acetone, tetrahydro-furan（THF） and THF/methanol（1：3,v/v） mixed solvent sequentially. The extracts were analyzed with GC/MS. It is presented that group seperation of soluble organic compounds in the coal can be achieved by fractionated extraction using different solvents. The results show that CS2 was effective for extracting arenes from the coal sample, n-Hexane extractable fraction from Datong coal mainly consists of n-alkanes. A great variety of oxygen-containing compounds are dominant in the components of methanol-soluble fraction. Acyclic isoprenoids, pentecyclic triterpanes and a series of cyclohexanes with long-chain alkyl-substitutes are detected in acetone-soluble fraction. Dicyclic aramatic hydrocarbons are identified in benzene-soluble fraction and 4-6 cyclic condensed aramatic hydrocarbons are identified in THF-soluble fraction. The molecular structures detection of 1,2-dichlorobenzene, 2,4-dibromophnol, 2,4,6-tribromophenol and 4-chlorobenzophenone firstly provide information for existence form of bromine and chlorine in coal.展开更多
It is necessary to use the integrated stainless steel pipe having two fitting bodies without welds while train travelling at high speed. In order to form this type of integrated stainless steel pipe, the method of pre...It is necessary to use the integrated stainless steel pipe having two fitting bodies without welds while train travelling at high speed. In order to form this type of integrated stainless steel pipe, the method of preforming combined finish forming process is developed. The preforming process is characterized by flaring combined upsetting for left fitting body which is like a flange, and is characterized by tube axial compressive process under die constraint for right fitting body which is like a double-wall pipe. The finite element simulations of the processes are carried out by software package DEFORM, and the results indicate that: 1) left or right fitting body can be formed by a two-step forming process without folding and under-filling defects; 2) by using two-step forming, strain and stress in left fitting body are larger than those in right fitting body, and deformation in right fitting body is more homogenous than the deformation in left fitting body; 3) two or more preforming steps may be needed for left fitting body considering the distributions of strain and stress.展开更多
基金Supported by China National Tobacco Corporation General Project(〔2012〕122)Chongqing Branch Company S&T Project of China National Tobacco Corporation(NY20110601070010)~~
文摘[Objective]The aim was to explore effects of curing technique parameters on chemical components and aromatic material accumulation to formulate a suitable curing technique and for and to achieve tobacco scalding, drying and giving aromat- ic flavor. [Method] With tobacco variety KRK 26 as test materials, the test involved parameters of three curing-techniques in down, middle and upper parts of flue-cured tobaccos in an oven to measure chemical components and aromatic substances in tobaccos. [Result] The effects of curing techniques on total sugar and reducing sug- ar differed upon temperature and humidity. The contents of chemical components, such as total alkaloid, total N and the ratio of sugar/ alkali by moderate temperature and high humidity technique were of significant differences with those by moderate temperature and moderate humidity technique and with low temperature and low hu- midity technique; the chemical components by moderate temperature and moderate humidity were of insignificant differences with the treatment by low temperature and low humidity technique. Total amount of aroma components by different curing tech- niques from high to low was the treatment by low temperature and low humidity technique （461.72 μg/g）, the treatment by moderate temperature and moderate hu- midity technique （450.06μg/g） and the treatment by moderate temperature and high humidity technique （385.12μg/g）, suggesting the content of aromatic substances is high at low temperature and low humidity. [Conclusion] Moderate temperature and high humidity curing technique has significant effects on total alkaloid, total N and the ratio of sugar/ alkali of tobaccos and different curing techniques also affect the total amount of aromatic substances of flue-cured tobaccos.
基金Supported by Changsha Key Project in Hunan Province(K1005007-21)~~
文摘[Objective] The aim was to analyze sugar components in fermented rice wine by ion chromatography. [Method] The optimal condition for chromatography system of sugar analysis was selected by measuring sugars in fermented rice wine with ion chromatography and pulsed amperometric detection. [Result] The optimal measurement conditions were as follows： Leacheate （Leachate）, consisting of NaOH and CH3COONa, was eluted by gradient concentrations, with column temperature at 35 ℃ and flow rate at 0.4 ml/min. In the condition, sugars in rice wine were ana- lyzed and the results showed that the method is featured by low detection limit, good repetition and high recovery rate. [Conclusion] The research establishes and determines the approaches and optimum conditions for sugar analysis in rice wine by ion chromatography and pulsed amperometric detection, providing references for advancement of research on quality improvement of fermented rice wine.
文摘Betulin, which is a medicinal pentacyclic triterpene, is abundant in the bark of white birch (Betula platyphlly). The bark of birch was collected at Tayuan Forest Farm of Jiagedaqi, Heilongjiang Province in September 2000. Supercritical fluid extraction (SFE) that is a new separation technology has been used for the processing pharmaceutical and natural products. In this paper, the extraction of betulin from the bark of birch by supercritical CO2 extraction was studied. The authors investigated and analyzed a few parameters such as modifier dosage, extraction pressure and extraction temperature. The optimal extrac-tion conditions showed that the modifier dosage used for per gram bark powder was 1.5 mL, the extraction pressure was at 20 Mpa, and the extraction temperature was at 55 C. The velocity of flow of liquid CO2 was at 10 kg/h. The pressure and tem-perature in separation vessel were at 5.5 Mpa and 50 C, respectively.
文摘A mathematical model of resin flow and temperature variation in the filling stage of the resin transfer molding (RTM) is developed based on the control volume/finite element method (CV/FEM). The effects of the heat transfer and chemical reaction of the resin on the flow and temperature are considered. The numerical algorithm of the resin flow and temperature variation in the process of RTM are studied. Its accuracy and convergence are analyzed. The comparison of temperature variations between experimental results and model predictions is carried out for two RTM cases. Result shows that the model is efficient for evaluating the flow and temperature variation in the filling stage of RTM and there is a good coincidence between theory and experiment.
基金Project supported by the National Natural Science Foundation of China (No. 30530630)the Major State Basic Research and Development Program of China (No. G2000046802-05)the National Key Technologies Research and Development Program of China during the Tenth Five-Year Period (No. 2001BA606A-05)the Knowledge Innovation Program of the Chinese Academy of Sciences (No. KSCX1-02)
文摘Investigations were conducted to quantify litterfall, and litter and nutrient accumulation in forest floor, and to acquire information on litter decomposition and nitrogen and phosphorus release patterns in three different subalpine coniferous forests, a plantation （P1）, a secondary forest （SF）, and a primitive forest （PF）, in western Sichuan, China. The litter trap method was used to evaluate litterfall with the litterbag method being utilized for litter decomposition. Seasonal patterns of litterfall were similar in the three forests, with two peaks occurring in September-November and March-May. The plantation revealed an annual litterfall of 4.38 x 103 kg ha-1, which was similar to those of SF and PF, but P1 had a lower mass loss rate and a higher C/N ratio. The C/N ratio may be a sound predictor for the decomposition differences. N concentrations of leaf litter in both the secondary forest and primitive forest increased first and then decreased, and the percentages of their final/initial values were 108.9% and 99.9%, respectively. P concentration in the three forests increased by the end of the study. The results of litterfall and decomposition indicated that in the plantation the potential to provide nutrients for soil organic matter was similar to those of SF and PF; however, its slower decomposition rate could result in a somewhat transient accumulation of litter in the forest floor.
基金Projects 20076051, G1999022101, and 98029016 supported by National Natural Science Foundation of China, the Special Found for Major State BasicResearch Project, and Research Found for the Doctoral Program of Higher Education
文摘Datong coal was extracted with CS2, n-hexane, benzene, methanol, acetone, tetrahydro-furan（THF） and THF/methanol（1：3,v/v） mixed solvent sequentially. The extracts were analyzed with GC/MS. It is presented that group seperation of soluble organic compounds in the coal can be achieved by fractionated extraction using different solvents. The results show that CS2 was effective for extracting arenes from the coal sample, n-Hexane extractable fraction from Datong coal mainly consists of n-alkanes. A great variety of oxygen-containing compounds are dominant in the components of methanol-soluble fraction. Acyclic isoprenoids, pentecyclic triterpanes and a series of cyclohexanes with long-chain alkyl-substitutes are detected in acetone-soluble fraction. Dicyclic aramatic hydrocarbons are identified in benzene-soluble fraction and 4-6 cyclic condensed aramatic hydrocarbons are identified in THF-soluble fraction. The molecular structures detection of 1,2-dichlorobenzene, 2,4-dibromophnol, 2,4,6-tribromophenol and 4-chlorobenzophenone firstly provide information for existence form of bromine and chlorine in coal.
基金Project(51305334)supported by the National Natural Science Foundation of ChinaProject(51335009)supported by the National Natural Science Foundation of China for Key Program+1 种基金Project(CXY1442(4))supported by the Science and Technology Planning Project of Xi’an,ChinaProject supported by Shaanxi Province Postdoctoral Science Research Program of China
文摘It is necessary to use the integrated stainless steel pipe having two fitting bodies without welds while train travelling at high speed. In order to form this type of integrated stainless steel pipe, the method of preforming combined finish forming process is developed. The preforming process is characterized by flaring combined upsetting for left fitting body which is like a flange, and is characterized by tube axial compressive process under die constraint for right fitting body which is like a double-wall pipe. The finite element simulations of the processes are carried out by software package DEFORM, and the results indicate that: 1) left or right fitting body can be formed by a two-step forming process without folding and under-filling defects; 2) by using two-step forming, strain and stress in left fitting body are larger than those in right fitting body, and deformation in right fitting body is more homogenous than the deformation in left fitting body; 3) two or more preforming steps may be needed for left fitting body considering the distributions of strain and stress.
