基于金字塔模型的护生应用层软技能培养途径研究

目的将金字塔模型应用于护理软技能,为提高护生软技能水平提供参考。方法根据金字塔模型中的应用层软技能内涵,在以往培养基础上增加培养途径,并在入学后、入学1学年后分别测量2014级大专护理专业学生应用层软技能培养现状。结果 2014级护生应用层软技能总体和六个维度差异均有统计学意义(P<0.05)。结论应用软技能金字塔模型,增加护生应用层软技能的培养途径,有利于护生应用层软技能提升。

Physiological Analysis of Two Arabidopsis thaliana Mutants in Response to CO2

[Objective] The 15urpose was to seek for the different phenotypes between wild type and Arabidopsis Mutants in response to CO2. [Method] The epidermis bioassays and seed germination test were carried out to analyze the physiological characteristics of two Arabidopsis mu- tants and their wild type. [Result] There existed distinct differences in stomata apertures, water loss and leaf temperature compared with wild type except for stomata density. In addition, seed germination test on the medium indicated that cdfl was insensitive to ABA, mannitol and NaCI, but cdsl performed contrary to cdil. [ Conclusion] There are some different physiological characteristics between wild type and mutants.

在思维训练中彰显计算教学的魅力——《两位数除以一位数》教学中的思维训练

数学是“思维的体操”，在计算教学中关注学生的思维，让学生在探究的过程中再创造计算方法、在有效思维的过程中建构知识体系、在解决问题的过程中形成计算技能，有助于进一步提升计算教学的活力和魅力．

Classical Communication Cost and Remote Preparation of Multi-qubit with Three-Party

We present a scheme for probabilistic remote preparation of multi-qubit with three-party from a sender to either of two receivers. The quantum channel is composed of a partial entangled tripartite GHZ state. We obtain the successful totM probability of the scheme in the general case and special case, respectively. We also calculate total classical communication cost required in the RSP process with three-party in the general case and special case, respectively.

Investigation on short-term burst pressure of plastic pipes reinforced by cross helically wound steel wires

Plastic pipes reinforced by cross helically wound steel wires (PSP), which have exhibited excellent mechanical performance, consist of inner polyethylene (PE) layer, winding layer and outer PE layer. The winding layer is composed of two monolayers where steel wires are cross helically wound. An analytical procedure is developed to predict the short-term burst pressure of PSP as the monolayer is assumed to be elastic and orthotropic. The 3D anisotropic elasticity and Maximum Stress Failure Criterion are employed in the formulation of the elasticity problem. Good agreement between the theoretical results and the experimental data shows that the proposed approach can well predict the short-term burst pressure of PSP.

Performance of fixed geosynthetic technique of GRPS embankment

Geosynthetic-reinforced and pile-supported （GRPS） embankment has been increasingly constructed in a large number of regions and for a wide range of projects in the past decades. However, many disadvantages are exposed through a lot of applications on conventional technique of GRPS embankment （called CT embankment）, i.e., intolerable settlement and lateral displacement, low geosynthetic efficiency, etc. In view of these disadvantages, the fixed geosynthetic technique of GRPS embankment （called FGT embankment） is developed in this work. In this system, the geosynthetic is fixed on the pile head by the steel bar fulcrum and concrete fixed top. The principles and construction techniques involved in the FGT embankment are described firstly. Then, the numerical analysis method and two-stage analysis method are used to study the performance of FGT embankment, respectively. It is shown that the FGT embankment can provide a better improvement technique to construct a high embankment over soft ground.

Thermal Analysis of High Power LED on Heat Sink

Thermal management of LED junction temperature is one of the fundamental technologies for LED lamp to ensure basic specifications in many aspects. Analysed is the high power LED's distribution on heat sink. Using mathematical statistical methods, a formula is conlcuded to calculate the size of heat sink under LED safe working temperature, which provides a method to researchers and LED lamp manufacturers.

Properties of Nanokaolin and Its Rubber Composites

A kind of nanokaolin powder with a thickness of 20-50nm and an average diameter of 300nm is produced through combined procedure of purification, delamination, surface modification and pulverization. The application experiments in butadiene rubber (BR), ethylene-propylene diene methylene (EPDM), and natural rubber (NR) indicates that this nano-kaolin powder material is much better than precipitated silica in reinforcement, while in styrene-butadiene rubber (SBR) it is close to precipitated silica. Nanokaolin is of superiority in elasticity, elongation at break, anti-flexure property.

Review and Perspective of Architecture Development for Dynamic Random Access Memory

Discussed is a review and perspective of architecture, materials and process technology for dynamic random access memory(DRAM) applications. Key challenges of the transistor and capacitor scaling from DRAM will be reviewed. To continue scaling down, multi-gate devices with very thin silicon channels are most promising. Several architectures like Fin-field effect transistor(Fin-FET), Wafer bonded double gate and silicon on nothing(SON) gate-all-around have been demonstrated with good electrical characteristics. An overview of the evolution of capacitor technology is also presented from the early days of planar poly/insulator/silicon(PIS) capacitors to the metal/insulator/metal(MIM) capacitors used for today 50nm technology node and below. In comparing Ta2O5, HfO2 and Al2O3 as high-k dielectric for use in DRAM technology, Al2O3 is found to give a good compromise between capacitor performance and manufacturability used in MIM architecture.

Cystic neoplasms of the pancreas: A diagnostic challenge

Cystic neoplasms of the pancreas are increasingly recognized due to the expanding use and improved sensitivity of cross-sectional abdominal imaging. Major advances in the last decade have led to an improved understanding of the various types of cystic lesions and their biologic behavior. Despite signifi cant improvements in imaging technology and the advent of endoscopic-ultrasound (EUS)-guided fineneedle aspiration, the diagnosis and management of pancreatic cystic lesions remains a significant clinical challenge. The fi rst diagnostic step is to differentiate between pancreatic pseudocyst and cystic neoplasm. If a pseudocyst has been effectively excluded, the cornerstone issue is then to determine the malignant potential of the pancreatic cystic neoplasm. In the majority of cases, the correct diagnosis and successful management is based not on a single test but on incorporating data from various sources including patient history, radiologic studies, endoscopic evaluation, and cyst fluid analysis. This review will focus on describing the various types of cystic neoplasms of the pancreas, their malignant potential, and will provide the clinician with a comprehensive diagnostic approach.

Synthesis and thermoelectric properties of Mg_2Si_(1-x)Sn_x solid solutions by microwave irradiation

In order to reduce the oxidizing and volatilizing caused by Mg element in the traditional methods for synthesizing Mg2Sil-xSnx （x=0.2, 0.4, 0.6, 0.8） solid solutions, microwave irradiation techniques were used in preparing them as thermoelectric materials. Structure and phase composition of the obtained materials were investigated by X-ray diffraction （XRD）. The electrical conductivity, Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 750 K. It is found that Mg2Si1-xSnx solid solutions are well formed with excessive content of 5% （molar fraction） Mg from the stoichiometric MgESil.xSnx under microwave irradiation. A maximum dimensionless figure of merit, ZT, of about 0.26 is obtained for Mg2Si1-xSnx solid solutions at about 500 K for x=0.6.

Two in One： The Collaboration Between Science Foundation Lecturers in Imparting Academic Skills to Students

Learning challenges are more common in the 21 st century than many people believe; however, there are more efficient and better methods to develop academic learning skills for students. Identifying learning problems can help both students and lecturers to apply specific learning techniques and work together to be more productive in the process of teaching and learning. This study investigates the collaboration of science foundation lecturers in addressing the students＇ academic performance and challenges in their foundation modules at the University of Venda. The study is also aimed at finding out whether students can be able to apply their information technology （IT） skills in other modules and they make use of group work in projects into different foundation modules to enhance performance and develop academic learning skills. In this study, students were given projects in their respective modules （Foundation Biology and Foundation IT） and it was required to them to make use of their IT skills during the research report and also during the presentation of their project. These projects were done in groups wherein students undertook some mini researches. Their findings were then reported in writing and presentations were held. The Foundation English lecturer helped in assessing the use of the academic language used in writing and during oral presentations. The findings from these projects were that students＇ academic performance and skills improved and their specific knowledge in those modules also improved radically. It was found that group work plays a very imperative role in enhancing the students＇ performance and collaboration in various foundation modules.

A Detailed Chunk-Level Performance Study of Web Page Retrieve Latency

It is a widely discussed question that where the web latency comes from. In this paper, we propose a novel chunk-level latency dependence model to give a better illustration of the web latency. Based on the fact that web content is delivered in chunk sequence, and clients care more about whole page retrieval latency, this paper carries out a detailed study on how the chunk sequence and relations affect the web retrieval latency. A series of thorough experiments are also conducted and data analysis are also made. The result is useful for further study on how to reduce the web latency.

Determination of Thermal Properties of Cuts and Residue Streams Obtained in the Molecular Distillation Process

A real-time sensing of the molecular distillation process temperature by a FLUKE brand thermograph Ti50 IR FlexCam and thermography technique was realized. After completion of the molecular distillation, three properties of heat transport chain cuts and residues obtained in the process were estimated by Differential Scanning Calorimetry （DSC） （specific heat, enthalpy, thermal conductivity）. These properties are of great importance for improving oil characterization and for future modeling and simulation of the molecular distillation process. The results show that through the method of Differential Scanning Calorimetry, profiles have been obtained from the variation of specific heat, enthalpy and thermal condutivity as a function of temperature for samples of cuts from the distillation （ASTM D-2892） and fractions of distillate and residue from the process of molecular distillation.

Forming technology of boiling structure on evaporation surface of phase-change heat sink for high-power light emitting diode

Boiling structures on evaporation surface of red copper sheet with a diameter （D） of 10 mm and a wall thickness （h） of 1 mm were processed by the ploughing-extrusion （P-E） processing method, which is one part of the phase-change heat sink for high power （HP） light emitting diode （LED）. The experimental results show that two different structures of rectangular- and triangular-shaped micro-grooves are formed in P-E process. When P-E depth （ap）, interval of helical grooves （dp） and rotation speed （n） are 0.12 ram, 0.2 mm and 100 r/min, respectively, the boiling structures of triangular-shaped grooves with the fin height of 0.15 mm that has good evaporation performance are obtained. The shapes of the boiling structures are restricted by dp and ap, and dp is determined by n and amount of feed （f）. The ploughing speed has an important influence on the formation of groove structure in P-E process.

Study on the Manufacturing Technology of Directly Metal Forming based on Overlay Welding

Rapid prototyping technology can greatly improve the actual processing industrial prototype; this paper introduces the main principle, characteristics and technology of rapid prototype manufacturing. The current rapid prototype manufacturing products and production problems are analyzed. Because of the direct metal forming process have the characteristic of point by point, surfacing with stack molding manufacturing layer by layer, so it is suitable for complex shape parts two-dimensional or three-dimensional functionally gradient materials manufacturing.

Facile Synthesis of 3D Porous Flower-like ZnO Micro/nanostructure Films and Their Photocatalytic Performance

3D porous flower-like ZnO micro/nanostructure films grown on Ti substrates are synthesized via a very facile electrodeposition technique followed by heat treatment process. The ZnO architecture is assembled with ultra thin sheets, which consist of numbers of nanoparticles and pores, and the size of the nanoparticles can be controlled by adjusting the electrodepo- sition time or calcination temperature. It is worth noting that this synthetic method can provide an effective route for other porous metal oxide nanostructure films. Moreover, the photocatalytic performance shows the porous ZnO is an ideal photocatalyst.

Concentrating Solar Power in Europe, the Middle East and North Africa： Achieving Its Potential

CSP （concentrating solar power） is a commercially available renewable energy technology capable of harnessing the immense solar resource in southern Europe, the MENA region （Middle East and North Africa）, and elsewhere. This paper summarises the findings of a study by the European Academies Science Advisory Council which has examined the current status and development challenges of CSP, and consequently has evaluated the potential contribution of CSP in Europe and the MENA region to 2050. It identifies the actions that will be required by scientists, engineers, policy makers, politicians, business and investors alike, to enable this vast solar resource to make a major contribution to establishing a sustainable energy system. The study concludes that cost reductions of 50%-60% in CSP electricity may reasonably be expected in the next 10-15 years, enabling the technology to be cost competitive with fossil-fired power generation at some point between 2020 and 2030. Incorporation of storage delivers added value in enabling CSP to deliver dispatchable power. Incentive schemes will be needed in Europe and MENA countries to enable this point to be achieved. Such schemes should reflect the true value of electricity to the grid, effectively drive research and development, and ensure transparency of performance and cost data.

Effects of High-Pressure Technology on the Functional Properties of Milk and Fermented Milk Products

HPP （high pressure processing） is one of the novel technologies to produce microbiologically safe food. HPP is a non-thermal food processing method, wherein the food is subjected to a very high pressure ranging between 100-800 MPa in order to prevent undesirable chemical and microbiological reactions, and hence, prolong the shelf-life. HPP is also called as ＂high hydrostatic processing, ultra-high pressure processing or isostatic processing＂. In dairy products, HHP has the potential to modify the functional properties of proteins, polysaccharides and alter biochemical reactions without significantly affecting the nutritional and sensory properties. HPP treatment induces significant changes in milk components particularly in proteins （whey proteins and caseins）, as well as on their applicability in innovative dairy productions. HPP influences technological properties of various milk products such as firmness, water-holding capacity of the gel and network structure, cheese yield, rennet coagulation time and ripening.

Study on Flexible Power Generation Device Using Piezoelectric Film

Various ocean energy technologies have been developed that harness several kinds of renewable energy resources of the ocean. However, these technologies suffer from problems such as high construction and maintenance costs, restrictive installation requirements and damage by extraordinary weather conditions. In this paper, we propose a lightweight and FPGD （flexible power generation device） that overcomes these problems. The FPGD essentially consists of piezoelectric films and silicon rubber. Because the FPGD is small and flexible, it is anticipated to efficiently convert fluid energy into electrical energy even when the fluid energy is low. We perform several experiments to confirm the effectiveness of the FPGD and we discuss the results.