膏盐岩层系在海相油气成藏中的潜在作用

膏盐岩层系作为理想的盖层被广泛关注,随着勘探和研究的不断深入,逐步发现膏盐岩层系在油气运移、储存、圈闭等过程中都发挥着重要作用。近年来,中国海相油气勘探在鄂尔多斯盆地东部、塔里木盆地中部、四川盆地西部等地区的含膏盐岩层系中不断取得突破,从而引发了高演化、低丰度膏盐岩层系成为油气来源这一问题的思考。在概要梳理膏盐岩层系在储-盖方面研究进展的同时,主要从烃源岩发育环境及成烃机理方面对膏盐岩层系烃源岩的发育和生烃潜力进行探究,认为膏盐岩层系包括中国高演化低有机碳含量的膏盐岩层系可以作为良好的烃源岩,这突破了低有机碳含量膏盐岩层系无法作为有效烃源的传统观点。高演化低有机碳含量膏盐岩层系中被低估的生烃物质、优质的生烃物质在地质历史中大量生烃转化和以有机酸盐形式存在的生烃物质是认识其生烃机理的关键。

Effects of zinc on Fe-based catalysts during the synthesis of light olefins from the Fischer-Tropsch process

Fe‐based catalysts for the production of light olefins via the Fischer‐Tropsch synthesis were modi‐fied by adding a Zn promoter using both microwave‐hydrothermal and impregnation methods. The physicochemical properties of the resulting catalysts were determined by scanning electron mi‐croscopy, the Brunauer‐Emmett‐Teller method, X‐ray diffraction, H2 temperature‐programed re‐duction and X‐ray photoelectron spectroscopy. The results demonstrate that the addition of a Zn promoter improves both the light olefin selectivity over the catalyst and the catalyst stability. The catalysts prepared via the impregnation method, which contain greater quantities of surface ZnO, exhibit severe carbon deposition following activity trials. In contrast, those materials synthesized using the microwave‐hydrothermal approach show improved dispersion of Zn and Fe phases and decreased carbon deposition, and so exhibit better CO conversion and stability.

Effect of the support on cobalt carbide catalysts for sustainable production of olefins from syngas

Co2C‐based catalysts with SiO2,γ‐Al2O3,and carbon nanotubes(CNTs)as support materials were prepared and evaluated for the Fischer‐Tropsch to olefin(FTO)reaction.The combination of catalytic performance and structure characterization indicates that the cobalt‐support interaction has a great influence on the Co2C morphology and catalytic performance.The CNT support facilitates the formation of a CoMn composite oxide during calcination,and Co2C nanoprisms were observed in the spent catalysts,resulting in a product distribution that greatly deviates from the classical Anderson‐Schulz‐Flory(ASF)distribution,where only 2.4 C%methane was generated.The Co3O4 phase for SiO2‐andγ‐Al2O3‐supported catalysts was observed in the calcined sample.After reduction,CoO,MnO,and low‐valence CoMn composite oxide were generated in theγ‐Al2O3‐supported sample,and both Co2C nanospheres and nanoprisms were identified in the corresponding spent catalyst.However,only separated phases of CoO and MnO were found in the reduced sample supported by SiO2,and Co2C nanospheres were detected in the spent catalyst without the evidence of any Co2C nanoprisms.The Co2C nanospheres led to a relatively high methane selectivity of 5.8 C%and 12.0 C%of theγ‐Al2O3‐and SiO2‐supported catalysts,respectively.These results suggest that a relatively weak cobalt‐support interaction is necessary for the formation of the CoMn composite oxide during calcination,which benefits the formation of Co2C nanoprisms with promising catalytic performance for the sustainable production of olefins via syngas.

Synthesis of Polyalphaolefins on AlCl_3/TiCl_4 Catalyst

The oligomerzation reactions on different catalysts were investigated and discussed. 1-Octene, 1-decene, 1-do- decene, a mixture of olefins （with a mass ratio of w（l-octene）： w（1-decenc）：w（1-dodecene） equating to 30：40：30）, and the products from paraffin cracking were oligomerized on the AlCl3/TiC14 catalyst. The results indicated that the AlCl3 catalyst led to severe coking reaction. With an increase in carbon number of alpha-olefins, the freezing point of oligomers increased and the kinematic viscosity decreased. The oligomers formed from the mixed olefins and the paraffin cracking products showed higher kinematic viscosity. Normal paraffins contained in the cracked products could increase the freezing point of oligomers. Furthermore, the distillation range of oligomers obtained from the cracked products was close to those of oligo- mers originated from 1-octene and 1-decene, while the oligomers obtained from the mixed olefins and 1-dodecene had simi- lar distillation ranges.

Role of surface frustrated Lewis pairs on reduced CeO2(110)in direct conversion of syngas

Direct syngas conversion to light olefins on bifunctional oxide-zeolite(OX-ZEO)catalysts is of great interest to both academia and industry,but the role of oxygen vacancy(Vo)in metal oxides and whether the key intermediate in the reaction mechanism is ketene or methanol are still not well-understood.To address these two issues,we carry out a theoretical study of the syngas conversion on the typical reducible metal oxide,CeO2,using density functional theory calculations.Our results demonstrate that by forming frustrated Lewis pairs(FLPs),the VOs in CeO2 play a key role in the activation of H2 and CO.The activation of H2 on FLPs undergoes a heterolytic dissociative pathway with a tiny barrier of 0.01 eV,while CO is activated on FLPs by combining with the basic site(O atom)of FLPs to form CO2^2-.Four pathways for the conversion of syngas were explored on FLPs,two of which are prone to form ketene and the other two are inclined to produce methanol suggesting a compromise to resolve the debate about the key intermediates(ketene or methanol)in the experiments.Rate constant calculations showed that the route initiating with the coupling of two CO*into OCCO*and ending with the formation of ketene is the dominant pathway,with the neighboring FLPs playing an important role in this pathway.Overall,our study reveals the function of the surface FLPs in the activation of H2 and CO and the reaction mechanism for the production of ketene and methanol for the first time,providing novel insights into syngas conversion over OX-ZEO catalysts.

Effect of alkali metals on the performance of CoCu/TiO_2 catalysts for CO_2 hydrogenation to long-chain hydrocarbons

CoCu/TiO_2 catalysts promoted using alkali metals（Li, Na, K, Rb, and Cs） were prepared by the homogeneous deposition-precipitation method followed by the incipient wetness impregnation method. The influences of the alkali metals on the physicochemical properties of the CoCu/TiO_2 catalysts and the catalytic performance for CO_2 hydrogenation to long-chain hydrocarbons（C_（5＋））were investigated in this work. According to the characterization of the catalysts based on X-ray photoelectron spectroscopy, X-ray diffraction, CO_2 temperature-programmed desorption（TPD）, and H_2-TPD, the introduction of alkali metals could increase the CO_2 adsorption and decrease the H_2 chemisorption, which could suppress the formation of CH_4, enhance the production of C_（5＋）, and decrease the hydrogenation activity. Among all the promoters, the Na-modified CoCu/TiO_2 catalyst provided the maximum C_（5＋） yield of 5.4%, with a CO_2 conversion of 18.4% and C_（5＋） selectivity of42.1%, because it showed the strongest basicity and a slight decrease in the amount of H_2 desorption;it also exhibited excellent catalytic stability of more than 200 h.