The regenerated cellulose fibers, made from wood pulp, have excellent physical properties like cotton fiber. Especially polynosic fibers can be mercerized by alkali, but conventional Viscose fiber can not be treated o...The regenerated cellulose fibers, made from wood pulp, have excellent physical properties like cotton fiber. Especially polynosic fibers can be mercerized by alkali, but conventional Viscose fiber can not be treated or mercerized by alkali. The paper studies on behavior of polynosic fibers treated by alkali, including physical properties, such as weight loss, tensile strength and elongation, and fiber structures properties. In this paper, on the basis of study on polynosic fibers treated by alkali, the conclusions were drawn as following. Firstly, polynosic fiber is good at alkali resistance. Secondly, the changes of fiber structure and physical properties begin declining at 5 wt% NaOH concentration and reverse changes take place at 10 wt%.展开更多
This research aimed to combine 3 cell and tissue culture technologies to obtain mechanistic insights of cells in porous scaffolds. When cultivated on 2D （2-dimensional） surfaces, HDFs （human dermal fibroblasts） be...This research aimed to combine 3 cell and tissue culture technologies to obtain mechanistic insights of cells in porous scaffolds. When cultivated on 2D （2-dimensional） surfaces, HDFs （human dermal fibroblasts） behaved individually and had no strict requirement on seeding density for proliferation; while HaCat cells relied heavily on initial densities for proliferation and colony formation, which was facilitated when co-cultured with HDFs. Experiments using a 3D CCIS （3-dimensional cell culture and imaging system） indicated that HDFs colonised openpores of varying sizes （125-420 ~tm） on modular substrates via bridge structures; while HaCat cells formed aperture structures and only colonised small pores （125 txm）. When co-cultured, HDFs not only facilitated HaCat attachment on the substrates, but also coordinated with HaCat cells to colonise open pores of varying sizes via bridge and aperture structures. Based on these observations, a 2-stage strategy for the culture of HDFs and HaCat cells on porous scaffolds was proposed and applied successfully on a cellulosic scaffold. This research demonstrated that cell colonisation in scaffolds was dependent on multiple factors; while the integrated 2D＆3D culture technologies and the 3D CCIS was an effective and efficient approach to obtain mechanistic insights of their influences on tissue regeneration.展开更多
In the last twenty years, new imaging techniques to assess atrial function and to predict the risk of recurrence of atrial fibrillation after treatment have been developed. The present review deals with the role of th...In the last twenty years, new imaging techniques to assess atrial function and to predict the risk of recurrence of atrial fibrillation after treatment have been developed. The present review deals with the role of these techniques in the detection of structural and functional changes of the atrium and diagnosis of atrial remodeling, particularly atrial fibrosis. Echocardiography allows the detection of anatomical, functional changes and deformation of the atrial wall during the phases of the cardiac cycle. For this, adequate acquisition of atrial images is necessary using speckle tracking imaging and interpretation of the resulting strain and strain rate curves. This allows to predict new-onset atrial fibrillation and recurrences. Its main limitations are inter-observer variability, the existence of different software manufacturers, and the fact that the software used were originally developed for the evaluation of the ventricular function and are now applied to the atria. Cardiac magnetic resonance, using contrast enhancement with gadolinium, plays a key role in the visualization and quantification of atrial fibrosis. This is the established method for in vivo visualization of myocardial fibrotic tissue. The non-invasive evaluation of atrial fibrosis is associ- ated with the risk of recurrence of atrial fibrillation and with electro-anatomical endocardial mapping. We discuss the limitations of these techniques, derived from the difficulty of demonstrating the correlation between fibrosis imaging and histology, and poor intra- and inter- observer reproducibility. The sources of discordance are described, mainly due to image acquisition and processing, and the challenges ahead in an attempt to eliminate differences between operators.展开更多
文摘The regenerated cellulose fibers, made from wood pulp, have excellent physical properties like cotton fiber. Especially polynosic fibers can be mercerized by alkali, but conventional Viscose fiber can not be treated or mercerized by alkali. The paper studies on behavior of polynosic fibers treated by alkali, including physical properties, such as weight loss, tensile strength and elongation, and fiber structures properties. In this paper, on the basis of study on polynosic fibers treated by alkali, the conclusions were drawn as following. Firstly, polynosic fiber is good at alkali resistance. Secondly, the changes of fiber structure and physical properties begin declining at 5 wt% NaOH concentration and reverse changes take place at 10 wt%.
文摘This research aimed to combine 3 cell and tissue culture technologies to obtain mechanistic insights of cells in porous scaffolds. When cultivated on 2D （2-dimensional） surfaces, HDFs （human dermal fibroblasts） behaved individually and had no strict requirement on seeding density for proliferation; while HaCat cells relied heavily on initial densities for proliferation and colony formation, which was facilitated when co-cultured with HDFs. Experiments using a 3D CCIS （3-dimensional cell culture and imaging system） indicated that HDFs colonised openpores of varying sizes （125-420 ~tm） on modular substrates via bridge structures; while HaCat cells formed aperture structures and only colonised small pores （125 txm）. When co-cultured, HDFs not only facilitated HaCat attachment on the substrates, but also coordinated with HaCat cells to colonise open pores of varying sizes via bridge and aperture structures. Based on these observations, a 2-stage strategy for the culture of HDFs and HaCat cells on porous scaffolds was proposed and applied successfully on a cellulosic scaffold. This research demonstrated that cell colonisation in scaffolds was dependent on multiple factors; while the integrated 2D＆3D culture technologies and the 3D CCIS was an effective and efficient approach to obtain mechanistic insights of their influences on tissue regeneration.
文摘In the last twenty years, new imaging techniques to assess atrial function and to predict the risk of recurrence of atrial fibrillation after treatment have been developed. The present review deals with the role of these techniques in the detection of structural and functional changes of the atrium and diagnosis of atrial remodeling, particularly atrial fibrosis. Echocardiography allows the detection of anatomical, functional changes and deformation of the atrial wall during the phases of the cardiac cycle. For this, adequate acquisition of atrial images is necessary using speckle tracking imaging and interpretation of the resulting strain and strain rate curves. This allows to predict new-onset atrial fibrillation and recurrences. Its main limitations are inter-observer variability, the existence of different software manufacturers, and the fact that the software used were originally developed for the evaluation of the ventricular function and are now applied to the atria. Cardiac magnetic resonance, using contrast enhancement with gadolinium, plays a key role in the visualization and quantification of atrial fibrosis. This is the established method for in vivo visualization of myocardial fibrotic tissue. The non-invasive evaluation of atrial fibrosis is associ- ated with the risk of recurrence of atrial fibrillation and with electro-anatomical endocardial mapping. We discuss the limitations of these techniques, derived from the difficulty of demonstrating the correlation between fibrosis imaging and histology, and poor intra- and inter- observer reproducibility. The sources of discordance are described, mainly due to image acquisition and processing, and the challenges ahead in an attempt to eliminate differences between operators.
