螺旋曲面磨削中砂轮截型计算的新方法

本文主要介绍螺旋曲面磨削中,砂轮截型计算的一种新方法。它从仿真模拟的角度出发用逐步逼近的方法求解。其突出的优点是计算简单,对工作截型方程要求低,即使是一组离散数据也可进行计算。

Isogeometric analysis for elliptical waveguide eigenvalue problems

The cutoff wavenumbers of elliptical waveguides were calculated by using isogeomtric analysis method （IGA）. With NURBS basis functions in IGA, the computational model was consistent with geometric model imported from CAD system. The field variable （longitudinal electric/magnetic field） was constructed by the same NURBS basis functions as the representation of geometric model. In the refinement procedure used to get a more accurate solution, communication with original CAD system is unnecessary and the geometric shape is kept unchanged. The Helrnholtz equation is weakened to a set of general eigenvalue equation by virtual work principal with diseretized degree-of-freedom on control points. Elliptical waveguides with three typical eccentricities, 0.1, 0.5 and 0.9, are calculated by IGA with different size mesh. The first four cutoff wavenumbers are obtained even in coarse mesh and the RMS of first 25 cutoff wavenumbers has much more swift convergence rate with decreasing the mesh size than traditional FEM. The accuracy and robustness of the proposed method are validated by elliptical waveguides, and also the method can be applied to waveguides with arbitrary cross sections.

A new model to estimate significant wave heights with ERS-1/2 scatterometer data

A new model is proposed to estimate the significant wave heights with ERS-1/2 scatterometer data. The results show that the relationship between wave parameters and radar backscattering cross section is similar to that between wind and the radar backscattering cross section. Therefore, the relationship between significant wave height and the radar backscattering cross section is established with a neural network algorithm, which is, if the average wave period is ≤7s, the root mean square of significant wave height retrieved from ERS-1/2 data is 0.51 m, or 0.72 m if it is >7s otherwise.

Theoretical Analysis of Neutron Double-Differential Cross Sections of n ＋^9Be Reactions

By using the nuclear reaction model for light nuclei, the calculations of the double-differential cross sections of outgoing neutrons from n ＋^9Be reactions are performed. The total outgoing neutrons are only come from the （n, 2n）2a reaction channel. The （n, 2n）2a reaction channel is achieved through six different reaction approach, which are illustrated in this paper. The calculated results agree very well with the measured data at En = 7.1, 8.09, 8.17, 9.09, 9.97 and 10.26 MeV, because the updated level schemes related to the n ＋ ^9Be reactions have been employed in this calculations.

Thermodynamic modeling of ZrO_(2)−CaO−TiO_(2)system

The phase diagram of ZrO_(2)−CaO−TiO_(2)system was essential for the development of photocatalytic materials and refractory materials.In this work,the ZrO_(2)−CaO−TiO_(2)system was accessed by using the CALPHAD method.The substitutional solution models were used to describe liquid and solid solution phases,the sub-lattice models were used to describe ternary compounds,and then the thermodynamic parameters were obtained by the least square method combined with literature experiment results.The acquired thermodynamic parameters were used to calculate the isothermal sections of the ZrO_(2)−CaO−TiO_(2)system at 1473 and 1673 K.There existed a good agreement between experimental and predicted phase relationships,the experimental points which were inconsistent with calculated results may be attributed to experimental errors and the sluggish kinetics of cations for ZrO_(2)-based materials.In order to further verify the validity of the database,the thermodynamic parameters were also used to simulate the thermodynamic properties(specific heat capacity,enthalpy,and entropy)of CaZrTi_(2)O_(7) within 5%errors.Good consistency demonstrated that the present thermodynamic database was self-consistent and credible.