When two contacting solid surfaces are tightly closed and invisible to the naked eye, the discontinuity is said to be microscopic regardless of whether its length is short or long. By this definition, it is not suffic...When two contacting solid surfaces are tightly closed and invisible to the naked eye, the discontinuity is said to be microscopic regardless of whether its length is short or long. By this definition, it is not sufficient to distinguish the difference between a micro- and macro-crack by using the length parameter. Microcracks in high strength metal alloys have been known to be sev- eral centimeters or longer. Considered in this work is a dual scale fatigue crack growth model where the main crack can be mi- cro or macro but there prevails an inherent microscopic tip region that is damaged depending on the irregularities of the micro- structure. This region is referred to as the ＂micro-tip＂ and can be simulated by a sharp wedge with different angles in addition to mixed boundary conditions. The combination is sufficient to model microscopic entities in the form of voids, inclusions, precipitations, interfaces, in addition to subgrain imperfections, or cluster of dislocations. This is accomplished by using the method of ＂singularity representation＂ such that closed form asymptotic solutions can be obtained for the development of fa- tigue crack growth rate relations with three parameters. They include： （1） the crack surface tightness o-＊ represented by Cro/Cr~ = 0.3-0.5 for short cracks in region I, and 0.1-0.2 for long cracks in region II, （2） the micro/macro material properties reflected by the shear modulus ratio/1＂ （=,L/micro/]-/macro varying between 2 and 5） and （3） the most sensitive parameter d＊ being the micro-tip characteristic length d＊ （=d/do） whose magnitude decreases in the direction of region I ---~II. The existing fatigue crack growth data for 2024-T3 and 7075-T6 aluminum sheets are used to reinterpret the two-parameter da/dN=C（AK）n relation where AK has now been re-derived for a microcrack with surfaces tightly in contact. The contact force will depend on the mean stress ~m or mean stress ratio R as the primary parameter and on the stress amplitude era as the secondary parameter.展开更多
文摘When two contacting solid surfaces are tightly closed and invisible to the naked eye, the discontinuity is said to be microscopic regardless of whether its length is short or long. By this definition, it is not sufficient to distinguish the difference between a micro- and macro-crack by using the length parameter. Microcracks in high strength metal alloys have been known to be sev- eral centimeters or longer. Considered in this work is a dual scale fatigue crack growth model where the main crack can be mi- cro or macro but there prevails an inherent microscopic tip region that is damaged depending on the irregularities of the micro- structure. This region is referred to as the ＂micro-tip＂ and can be simulated by a sharp wedge with different angles in addition to mixed boundary conditions. The combination is sufficient to model microscopic entities in the form of voids, inclusions, precipitations, interfaces, in addition to subgrain imperfections, or cluster of dislocations. This is accomplished by using the method of ＂singularity representation＂ such that closed form asymptotic solutions can be obtained for the development of fa- tigue crack growth rate relations with three parameters. They include： （1） the crack surface tightness o-＊ represented by Cro/Cr~ = 0.3-0.5 for short cracks in region I, and 0.1-0.2 for long cracks in region II, （2） the micro/macro material properties reflected by the shear modulus ratio/1＂ （=,L/micro/]-/macro varying between 2 and 5） and （3） the most sensitive parameter d＊ being the micro-tip characteristic length d＊ （=d/do） whose magnitude decreases in the direction of region I ---~II. The existing fatigue crack growth data for 2024-T3 and 7075-T6 aluminum sheets are used to reinterpret the two-parameter da/dN=C（AK）n relation where AK has now been re-derived for a microcrack with surfaces tightly in contact. The contact force will depend on the mean stress ~m or mean stress ratio R as the primary parameter and on the stress amplitude era as the secondary parameter.
