水下航行装置推进轴系扭转振动控制研究

主要讨论以摆盘式活塞发动机作为其主机的某水下航行装置推进轴系的扭转振动问题。首先建立了推进轴系的两个扭振模型，并进行了轴系的扭振计算。为了验证模型参数的准确性，对推进轴系进行了脉冲激励试验。以试验及计算结果为依据对推进轴系的几种不同方案进行了比较。最后对双轴调频减振方案进行分析。

Torsional vibration analysis of lathe spindle system with unbalanced workpiece

For the purpose of analyzing the torsional vibration caused by the gravitational unbalance torque arisen in a spindle system when it is machining heavy work piece,a 10-DOF lumped parameter model was made for the machine tool spindle system with geared transmission.By using the elementary method and Runge-Kutta method in Matlab,the eigenvalue problem was solved and the pure torsional vibration responses were obtained and examined.The results show that the spindle system cannot operate in the desired constant rotating speed as far as the gravitational unbalance torque is engaged,so it may cause bad effect on machining accuracy.And the torsional vibration increases infinitely near the resonant frequencies,so the spindle system cannot operate normally during these spindle speed ranges.

Torsional vibration active control of hybrid construction machinery complex shafting

Due to the coaxial connection of engine, motor and pump, the dynamic characteristics of hybrid construction machinery are changed, which generates a new torsional vibration problem of multi-power sources. To reduce the torsional vibration of the hybrid construction machinery complex shafting, torsional vibration active control was proposed. The three-mass model of coaxial shafting of hybrid construction machinery was established. The PID control and the fuzzy sliding mode control were chosen to weaken torsional vibration by controlling the motor speed and torque. The simulation results show that the fuzzy sliding mode control has 12% overshoot of the PID control when the engine torque changes. The active control is effective and can realize smooth power switch.

Modeling unbalanced rotor system with continuous viscoelastic shaft by frequency-dependent shape function

A reduced-order dynamic model for an unbalanced rotor system is developed, taking the coupling between torsional and lateral vibrations into account. It is assumed that a shaft is regarded as a continuous viscoelastic shaft with unbalanced and small deformation properties. The equations of motion for the torsional and lateral vibrations are derived using Lagrange's approach with the frequency-dependent shape function. The rotor torsional vibration is coupled with the lateral vibrations by unbalance elements in a way of excitations. Simulation and experiment results show clearly that the torsional vibration has strong impact on the rotor lateral vibrations, and it causes subharmonic and superharmonic excitations through unbalance elements, which leads to the superharmonic resonances in the lateral vibrations. This model with low-order and high accuracy is suitable for rotor dynamic analysis in real time simulation as well as for active vibration control syntheses.

Impact of Material on Crankshaft Torsional Vibrations

In this study, it shows how the main indicators of torsional vibrations of the crankshaft change when its materials change. In the study, the crankshaft of diesel engine with four cylinders in line was taken, in which the material is changing from steel to cast iron, due to the technological possibilities of production. For study of torsional vibration of crankshaft system, the construction of equivalent reduced scheme is carried. Reduced inertia moments of discs are determined for each crank of crankshaft, by receiving the impact of piston group and rod mass. Reduced rigidities of crank are determined by experimental method. The results show that the rigidity of crank for the same crankshaft varies up to 6%, while the change between crankshafts goes up 10%. At the end, frequency and vibration forms are calculated using Tole-Holxer method. From calculations, it results that the frequencies are 19% smaller, while the vibration forms varies slightly. In this case, the change of the materials leads to the first frequency in the area of engine rotations and it can worsen the level of torsional vibration, therefore, it should check the resonance areas and vibration amplitude.

Torsional Vibration Analysis of an FR Driveline System

Towing tractor drivelines are lightly damped non-linear systems. Interactions between components can cause dynamic behavors such as gear gap impact in gear transmissions, shuffle and clonk phenomena in driveline. The torsional vibration of driveline has an important effect on grand engineering vehicle vibration and noise. Through analyzing torsional vibration equations of driveline, torsional vibration model of driveline is developed by using Matlab/Simulink software, Shuffle and clonk phenomena are observed in torsional vibration. The modeling method of analysizing driveline torsional vibration can be used to research and improve similar engineering vehicle driveline behavors.

TORSIONAL OSCILLATION CHARACTERISTICS OF ROTARY SHAFTS BASED ON TORSION AND BENDING COUPLED VIBRATION

The torsional oscillation characteristics on the bending and torsioh coupled vibration of rotary shaft system were investigated using the elasto-dynamic theory and other mathematic methods, such as difference approach, Fourier transform, and wavelet transform. It is concluded that mass eccentricity and other exciting modalities affect the bending and torsion coupled vibration of rotary shafts. Torsional vibration caused by bending vibration features linearity along with the change of amplitude of bending vibration. Meanwhile, energy spectrum concentrates on high frequency area with the wavelet analysis.