A composite control scheme consisting of modepredictive control （MPC） and disturbance observer （DOB） iproposed to solve the control performance degradationproblem of the turbidity of the treated water in the prese...A composite control scheme consisting of modepredictive control （MPC） and disturbance observer （DOB） iproposed to solve the control performance degradationproblem of the turbidity of the treated water in the presence osignificant changes in raw water quality, water flow rate andinternal model mismatch disturbances. The MPC is employedas a feedback controller for the coagulation process with alarge time delay. The DOB is adopted to estimate the severedisturbances in the turbidity control, such as large changes inraw water quality and water flow rate. The estimated valuesare applied for feed-forward compensation to rejecdisturbances. Finally, the disturbance rejection performancesfor step disturbances and time-varying disturbances in thenominal case and model mismatch case are tested. Thesimulation results illustrate that, compared with the MPCmethod, the proposed method can significantly improve thedisturbance rejection performance in the turbidity control othe treated water, no matter if in the presence of externadisturbances or internal model mismatch disturbances.展开更多
The highly nonlinear behavior of the system limits the performance of classical linear proportional and integral （PI） controllers used for hot rolling. An active disturbance rejection controller is proposed in this ...The highly nonlinear behavior of the system limits the performance of classical linear proportional and integral （PI） controllers used for hot rolling. An active disturbance rejection controller is proposed in this paper to deal with the nonlinear problem of hydraulic servo system in order to preserve last response and small overshoot of control system. The active disturbance rejection （ADR） controller is composed of nonlinear tracking differentiator （TD）, extended state observer （ESO） and nonlinear feedback （NF） law. An example of the hydraulic edger system case study is investigated to show the effectiveness and robustness of the proposed nonlinear controller, especially, in the circumstance of foreign disturbance and working condition variation, compared with classic PI controller.展开更多
Positioning with high precision piezoelectric actuators is widely used.To overcome positioning inaccuracy caused by hysteresis and creep of actuators,a precise tracking method for piezoelectric actuators using active ...Positioning with high precision piezoelectric actuators is widely used.To overcome positioning inaccuracy caused by hysteresis and creep of actuators,a precise tracking method for piezoelectric actuators using active disturbance rejection control(ADRC) has been proposed in this paper.This method,in real-time,actively estimates and compensates parameter uncertainties,nonlinear factors such as hysteresis,and external disturbances in the tracking system.Precise tracking of the piezoelectric actuator can be achieved without any form of feedforward compensations.The experimental results demonstrate that the active disturbance rejection controller can reduce tracking errors by over90%comparing with those using the PID controller.Those features of the proposed control method are very suitable for applications in adaptive optics.展开更多
A backstepping method based adaptive robust dead-zone compensation controller is pro- posed for the electro-hydraulic servo systems （EHSSs） with unknown dead-zone and uncertain system parameters. Variable load is se...A backstepping method based adaptive robust dead-zone compensation controller is pro- posed for the electro-hydraulic servo systems （EHSSs） with unknown dead-zone and uncertain system parameters. Variable load is seen as a sum of a constant and a variable part. The constant part is regarded as a parameter of the system to be estimated real time. The variable part together with the friction are seen as disturbance so that a robust term in the controller can be adopted to reject them. Compared with the traditional dead-zone compensation method, a dead-zone compensator is incor- porated in the EH$S without constructing a dead-zone inverse. Combining backstepping method, an adaptive robust controller （ARC） with dead-zone compensation is formed. An easy-to-use ARC tuning method is also proposed after a further analysis of the ARC structure. Simulations show that the proposed method has a splendid tracking performance, all the uncertain parameters can be estimated, and the disturbance has been rejected while the dead-zone term is well estimated and compensated.展开更多
基金The National Natural Science Foundation of China(No.61504027)the Natural Science Foundation of Jiangsu Province(No.BK20140647)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘A composite control scheme consisting of modepredictive control （MPC） and disturbance observer （DOB） iproposed to solve the control performance degradationproblem of the turbidity of the treated water in the presence osignificant changes in raw water quality, water flow rate andinternal model mismatch disturbances. The MPC is employedas a feedback controller for the coagulation process with alarge time delay. The DOB is adopted to estimate the severedisturbances in the turbidity control, such as large changes inraw water quality and water flow rate. The estimated valuesare applied for feed-forward compensation to rejecdisturbances. Finally, the disturbance rejection performancesfor step disturbances and time-varying disturbances in thenominal case and model mismatch case are tested. Thesimulation results illustrate that, compared with the MPCmethod, the proposed method can significantly improve thedisturbance rejection performance in the turbidity control othe treated water, no matter if in the presence of externadisturbances or internal model mismatch disturbances.
基金Project supported by the National Basic Research Program (973) of China (No. 2006CB705400)the National Natural Science Foun- dation of China (No. 50575200)
文摘The highly nonlinear behavior of the system limits the performance of classical linear proportional and integral （PI） controllers used for hot rolling. An active disturbance rejection controller is proposed in this paper to deal with the nonlinear problem of hydraulic servo system in order to preserve last response and small overshoot of control system. The active disturbance rejection （ADR） controller is composed of nonlinear tracking differentiator （TD）, extended state observer （ESO） and nonlinear feedback （NF） law. An example of the hydraulic edger system case study is investigated to show the effectiveness and robustness of the proposed nonlinear controller, especially, in the circumstance of foreign disturbance and working condition variation, compared with classic PI controller.
基金Supported by the National Natural Science Foundation of China(No.11373048)
文摘Positioning with high precision piezoelectric actuators is widely used.To overcome positioning inaccuracy caused by hysteresis and creep of actuators,a precise tracking method for piezoelectric actuators using active disturbance rejection control(ADRC) has been proposed in this paper.This method,in real-time,actively estimates and compensates parameter uncertainties,nonlinear factors such as hysteresis,and external disturbances in the tracking system.Precise tracking of the piezoelectric actuator can be achieved without any form of feedforward compensations.The experimental results demonstrate that the active disturbance rejection controller can reduce tracking errors by over90%comparing with those using the PID controller.Those features of the proposed control method are very suitable for applications in adaptive optics.
基金supported by Program for New Century Excellent Talents in University(NCET-12-0049)Beijing Natural Science Foundation(4132034)
文摘A backstepping method based adaptive robust dead-zone compensation controller is pro- posed for the electro-hydraulic servo systems （EHSSs） with unknown dead-zone and uncertain system parameters. Variable load is seen as a sum of a constant and a variable part. The constant part is regarded as a parameter of the system to be estimated real time. The variable part together with the friction are seen as disturbance so that a robust term in the controller can be adopted to reject them. Compared with the traditional dead-zone compensation method, a dead-zone compensator is incor- porated in the EH$S without constructing a dead-zone inverse. Combining backstepping method, an adaptive robust controller （ARC） with dead-zone compensation is formed. An easy-to-use ARC tuning method is also proposed after a further analysis of the ARC structure. Simulations show that the proposed method has a splendid tracking performance, all the uncertain parameters can be estimated, and the disturbance has been rejected while the dead-zone term is well estimated and compensated.
