Numerical analysis is carried out to study the sectional properties of the fiber-reinforced polymer（FRP）-confined reinforced concrete（RC）circular columns. The axial load ratio, the FRP confinement ratio and the lo...Numerical analysis is carried out to study the sectional properties of the fiber-reinforced polymer（FRP）-confined reinforced concrete（RC）circular columns. The axial load ratio, the FRP confinement ratio and the longitudinal reinforcement characteristic value are the three main parameters that can influence the neutral axis depth when concrete compression strain reaches an ultimate value. The formula for computing the central angle θ, corresponding to the compression zone, is established according to the data regression of the numerical analysis results. The numerical analysis results demonstrate that the concrete stress enhancement from transverse confinement and strain hardening of the longitudinal reinforcement can cause a much greater flexural strength than that defined by the design code. Based on the analytical studies and the test results of 36 large scale columns, the formula to calculate the flexural strength when columns fail under seismic loading is proposed, and the calculated results agree well with the test results. Finally, parametric studies are conducted on a typical column with different axial load ratios, longitudinal reinforcement characteristic value and FRP confinement ratios. Analysis of the results shows that the calculated flexural strength can be increased by 50% compared to that of unconfined columns defined by the code.展开更多
In order to reveal the flexural behavior of hybrid fiber reinforced high-performance concrete deep beam, 16 high-performance concrete deep beams of different fiber volume content have been tested according to the stat...In order to reveal the flexural behavior of hybrid fiber reinforced high-performance concrete deep beam, 16 high-performance concrete deep beams of different fiber volume content have been tested according to the state standards and testing methods. The effects of hybrid fiber on the yield moment and bending bearing capacity of the cross-section have been analyzed, the calculation method for the bending capacity＇ is discussed and the propositional formula are provided as well. Results shoxv that the flexural properties increased obviously when add ≤1.0% of volume content steel fibers and ≤0.11% of volume content polypropylene fibers in to deep beam. The results are useful to the further amendments of fiber reinforced concrete structure technical regulation （CECS 38：2004）.展开更多
In order to study the bearing capacity and stability behavior of cold-formed steel flexural members with complicated sections,a total of 12 specimens divided into 6 groups were tested,including 3 groups of pure bendin...In order to study the bearing capacity and stability behavior of cold-formed steel flexural members with complicated sections,a total of 12 specimens divided into 6 groups were tested,including 3 groups of pure bending tests and non-pure bending tests each.There were three types of sections considered in this investigation,including channels with complex edge stiffeners(called B1-section),Σsection with complex edge stiffeners(called B2-section),and channels with complex edge stiffeners and V-type web stiffeners(called B3-section).Local buckling,distortional buckling and interaction buckling between them were observed in tests.The experimental results indicate that the bending strengths of B2-section specimens were the largest of these three types of specimens under the same conditions.It is found that the bending strength of B2-section specimens was increased by 6.47%for pure bending state and 8.12%for non-pure bending state,compared with that of B1-section specimens.Bending strength of B3-section specimens was almost the same with that of B1-section specimens under pure bending,but a little smaller than that of B1-section under non-pure bending state.It is also shown that B2-section specimens have better plastic deformation behavior than the other two sections.In addition,a non-linear finite element model was presented and verified against tests.The finite element analysis results agree well with experimental bending strength and failure modes.展开更多
基金The National Basic Research Program of China (973 Program)(No.2007CB714200)the National Natural Science Foundationof China (No.50608015,50908102)
文摘Numerical analysis is carried out to study the sectional properties of the fiber-reinforced polymer（FRP）-confined reinforced concrete（RC）circular columns. The axial load ratio, the FRP confinement ratio and the longitudinal reinforcement characteristic value are the three main parameters that can influence the neutral axis depth when concrete compression strain reaches an ultimate value. The formula for computing the central angle θ, corresponding to the compression zone, is established according to the data regression of the numerical analysis results. The numerical analysis results demonstrate that the concrete stress enhancement from transverse confinement and strain hardening of the longitudinal reinforcement can cause a much greater flexural strength than that defined by the design code. Based on the analytical studies and the test results of 36 large scale columns, the formula to calculate the flexural strength when columns fail under seismic loading is proposed, and the calculated results agree well with the test results. Finally, parametric studies are conducted on a typical column with different axial load ratios, longitudinal reinforcement characteristic value and FRP confinement ratios. Analysis of the results shows that the calculated flexural strength can be increased by 50% compared to that of unconfined columns defined by the code.
基金This study was supported by Science Foundation for Young Scientists of Hubei Province Educational Committee of China.
文摘In order to reveal the flexural behavior of hybrid fiber reinforced high-performance concrete deep beam, 16 high-performance concrete deep beams of different fiber volume content have been tested according to the state standards and testing methods. The effects of hybrid fiber on the yield moment and bending bearing capacity of the cross-section have been analyzed, the calculation method for the bending capacity＇ is discussed and the propositional formula are provided as well. Results shoxv that the flexural properties increased obviously when add ≤1.0% of volume content steel fibers and ≤0.11% of volume content polypropylene fibers in to deep beam. The results are useful to the further amendments of fiber reinforced concrete structure technical regulation （CECS 38：2004）.
基金Project(51008200)supported by the National Natural Science Foundation of ChinaProject(2015020575)supported by Natural Science Foundation of Liaoning Province,ChinaProject(F16-205-1-14)supported by Science and Technology Program of Shenyang City,China
文摘In order to study the bearing capacity and stability behavior of cold-formed steel flexural members with complicated sections,a total of 12 specimens divided into 6 groups were tested,including 3 groups of pure bending tests and non-pure bending tests each.There were three types of sections considered in this investigation,including channels with complex edge stiffeners(called B1-section),Σsection with complex edge stiffeners(called B2-section),and channels with complex edge stiffeners and V-type web stiffeners(called B3-section).Local buckling,distortional buckling and interaction buckling between them were observed in tests.The experimental results indicate that the bending strengths of B2-section specimens were the largest of these three types of specimens under the same conditions.It is found that the bending strength of B2-section specimens was increased by 6.47%for pure bending state and 8.12%for non-pure bending state,compared with that of B1-section specimens.Bending strength of B3-section specimens was almost the same with that of B1-section specimens under pure bending,but a little smaller than that of B1-section under non-pure bending state.It is also shown that B2-section specimens have better plastic deformation behavior than the other two sections.In addition,a non-linear finite element model was presented and verified against tests.The finite element analysis results agree well with experimental bending strength and failure modes.
