In this study,nano-graphene reinforced titanium matrix composites(GNPs/Ti)with a honeycomb porous structure were fabricated by selective laser melting(SLM).The effects of graphene on the microstructure,mechanical prop...In this study,nano-graphene reinforced titanium matrix composites(GNPs/Ti)with a honeycomb porous structure were fabricated by selective laser melting(SLM).The effects of graphene on the microstructure,mechanical properties and corrosion performance of the SLM GNPs/Ti were systematically investigated.Results of microstructure characterization show that:1)the density of the SLM GNPs/Ti was improved as compared to that of the SLM Ti;2)abundant TiC particles were formed in the SLM GNPs/Ti.The hardness and compressive strength of the composite increased by 90%(from HV 236 to HV 503)and 14%(from 277 MPa to 316 MPa),respectively,attributed to the uniformly distributed TiC and fine GNPs in the Ti matrix.Electrochemical tests reveal that the corrosion current density of the SLM GNPs/Ti is only 0.328μA/cm^(2),that is about 25%less than that of the SLM Ti.The results indicate that the incorporation of nano-graphene is a potential method to strengthen the Ti by SLM.展开更多
Plunge milling is a high-speed machining way and the cutter is fed in the direction of the Z axis, which is used to remove excess material rapidly in roughing operations. In this paper, the orthogonal cutting theory w...Plunge milling is a high-speed machining way and the cutter is fed in the direction of the Z axis, which is used to remove excess material rapidly in roughing operations. In this paper, the orthogonal cutting theory was used to study the plunge milling of LY12 alloy. A mathematic model for cutting force in plunge milling was established, and the milling process was simulated by using Matlab. It is found that the single tooth cutting experimental result is unstable because of unsymmetrical single tooth in the milling process, which leads to the difference between the simulation and experimental results. The trend of multiple teeth cutting experimental result is similar to that of the simulation result; however, the peak values in the experimental result are different, which is caused by the error of cutter’s position, and the error of peak value is less than 10%.展开更多
In this paper, nanotechnology for the improvement of dental composite resins has been reviewed in the background of the existing shortcomings, focusing on the improvement for polymerization shrinkage, anti-bacterial p...In this paper, nanotechnology for the improvement of dental composite resins has been reviewed in the background of the existing shortcomings, focusing on the improvement for polymerization shrinkage, anti-bacterial properties and mechanical properties of composite resins. The results show that the use of nanotechnology and nano materials can be an effective method to improve the performance of dental composite resins in a various ways. At last, the paper also discusses the perspective about the dental composite resins.展开更多
Vortex spinning is an innovative air-jet spinning technology with promising features.A comparison of the vortex and ring spun cotton yarns and their knitted fabric properties was provided to evaluate the latent capabi...Vortex spinning is an innovative air-jet spinning technology with promising features.A comparison of the vortex and ring spun cotton yarns and their knitted fabric properties was provided to evaluate the latent capability of the vortex spinning technology.The results show that the vortex yarn has better elongation,evenness and much less hairiness than the ring yarn.The vortex fabric is found to have better air permeability,bursting properties,and pilling resistance than the ring fabric,while the drapeability and abrasion resistance of the ring fabric are better than the vortex fabric.展开更多
This paper explores the myriad capabilities of that contraption, the computer, and its attendant role in the development of creative thought and logical thinking; skills （we could have used the word ＂knowledge＂ ins...This paper explores the myriad capabilities of that contraption, the computer, and its attendant role in the development of creative thought and logical thinking; skills （we could have used the word ＂knowledge＂ instead of skills; but to avoid the unnecessary ambiguity of the former, we shall drop it and talk of skills instead） which the humanistic disciplines and related disciplines in the social sciences and in natural sciences should inculcate. The process of acquiring these skills assumes that one rational animal-the student develops her/his rational powers by studying the wisdom and folly of other rational animals-the authors of various works and/or disciplines the student is set to study. In a word, what is dealt with specifically in the humanistic disciplines, in swimming and riding bicycles, leave us only when decrepitude invades our minds and bodies. In short, students must learn to think. This is an obvious platitude.展开更多
基金Projects(51504191,51671152,51874225)supported by the National Natural Science Foundation of ChinaProject(2019GY-188)supported by the Key R&D Projects of Shaanxi,China+2 种基金Project(18JC019)supported by the Industrialization Project of Shaanxi Education Department,ChinaProject(PMMSLKL-901)supported by the State Key Laboratory of Metal Porous Materials,ChinaProject(2020ZDLGY13-10)supported by the Science&Technology Project of Shaanxi,China。
文摘In this study,nano-graphene reinforced titanium matrix composites(GNPs/Ti)with a honeycomb porous structure were fabricated by selective laser melting(SLM).The effects of graphene on the microstructure,mechanical properties and corrosion performance of the SLM GNPs/Ti were systematically investigated.Results of microstructure characterization show that:1)the density of the SLM GNPs/Ti was improved as compared to that of the SLM Ti;2)abundant TiC particles were formed in the SLM GNPs/Ti.The hardness and compressive strength of the composite increased by 90%(from HV 236 to HV 503)and 14%(from 277 MPa to 316 MPa),respectively,attributed to the uniformly distributed TiC and fine GNPs in the Ti matrix.Electrochemical tests reveal that the corrosion current density of the SLM GNPs/Ti is only 0.328μA/cm^(2),that is about 25%less than that of the SLM Ti.The results indicate that the incorporation of nano-graphene is a potential method to strengthen the Ti by SLM.
基金Supported by Advanced Manufacturing Technology-Key Laboratory of Beijing Municipality Project(No.10200531)Tianjin University-Kenna-metal Joint Project+1 种基金Young Teacher Foundation of Tianjin UniversityApparatus Foundation of Tianjin University.
文摘Plunge milling is a high-speed machining way and the cutter is fed in the direction of the Z axis, which is used to remove excess material rapidly in roughing operations. In this paper, the orthogonal cutting theory was used to study the plunge milling of LY12 alloy. A mathematic model for cutting force in plunge milling was established, and the milling process was simulated by using Matlab. It is found that the single tooth cutting experimental result is unstable because of unsymmetrical single tooth in the milling process, which leads to the difference between the simulation and experimental results. The trend of multiple teeth cutting experimental result is similar to that of the simulation result; however, the peak values in the experimental result are different, which is caused by the error of cutter’s position, and the error of peak value is less than 10%.
文摘In this paper, nanotechnology for the improvement of dental composite resins has been reviewed in the background of the existing shortcomings, focusing on the improvement for polymerization shrinkage, anti-bacterial properties and mechanical properties of composite resins. The results show that the use of nanotechnology and nano materials can be an effective method to improve the performance of dental composite resins in a various ways. At last, the paper also discusses the perspective about the dental composite resins.
基金National Natural Science Foundation of China(No.51076026)Natural Science Foundation of Shanghai,China(No.12ZR1440300)the Fundamental Research Funds for the Central Universities of China
文摘Vortex spinning is an innovative air-jet spinning technology with promising features.A comparison of the vortex and ring spun cotton yarns and their knitted fabric properties was provided to evaluate the latent capability of the vortex spinning technology.The results show that the vortex yarn has better elongation,evenness and much less hairiness than the ring yarn.The vortex fabric is found to have better air permeability,bursting properties,and pilling resistance than the ring fabric,while the drapeability and abrasion resistance of the ring fabric are better than the vortex fabric.
文摘This paper explores the myriad capabilities of that contraption, the computer, and its attendant role in the development of creative thought and logical thinking; skills （we could have used the word ＂knowledge＂ instead of skills; but to avoid the unnecessary ambiguity of the former, we shall drop it and talk of skills instead） which the humanistic disciplines and related disciplines in the social sciences and in natural sciences should inculcate. The process of acquiring these skills assumes that one rational animal-the student develops her/his rational powers by studying the wisdom and folly of other rational animals-the authors of various works and/or disciplines the student is set to study. In a word, what is dealt with specifically in the humanistic disciplines, in swimming and riding bicycles, leave us only when decrepitude invades our minds and bodies. In short, students must learn to think. This is an obvious platitude.
