In order to improve the early-age cracking resistance of concrete, different types of superplasticizers are used. Two types of polycarboxlic salt/acid superplasticizers and one retarding naphthalene superplasticizer a...In order to improve the early-age cracking resistance of concrete, different types of superplasticizers are used. Two types of polycarboxlic salt/acid superplasticizers and one retarding naphthalene superplasticizer are selected to investigate the influence of superplasticizers on the early-age cracking resistance of the concrete by using the slab test and the temperature-stress test. The results show that the polycarboxlic salt/acid superplasticizer cannot always improve the cracking resistance capacity of the concrete compared with the naphthalene superplasticizer, which is related to the chemical structure of the polycarboxlic salt/acid superplasticizer. High plastic tensile strength and dynamic elastic modulus at the early stage are beneficial to avoid cracking, and low hydration heat is also helpful. The evolutions of the drying shrilakage stress and the hydration heat temperature stress varying with time can be comprehensively evaluated by means of the slab test and the temperature stress test.展开更多
Nine reinforced concrete (RC) beams strengthened by glass fiber reinforced polymer (GFRP) sheets and three control beams are tested. Four parameters are considered in this experimental program included the concrete st...Nine reinforced concrete (RC) beams strengthened by glass fiber reinforced polymer (GFRP) sheets and three control beams are tested. Four parameters are considered in this experimental program included the concrete strength, the reinforcement ratio, the number of GFRP sheets, and the shear span ratio. It is shown that the application of GFRP sheets can increase the ultimate flexural capacity. The effect of the concrete strength, the reinforcement ratio and the number of GFRP sheets on load capacity is obvious. The shear span ratio can affect the failure mode of RC beams strengthened by GFRP sheets. A theoretical model for flexural behavior of the strengthened RC beam is also developed.展开更多
To optimize the distance between the bells in pile design,this paper reports a series of small scale tests on the uplift capacity of double belled piles embedded in dry dense sand considering different bell space rati...To optimize the distance between the bells in pile design,this paper reports a series of small scale tests on the uplift capacity of double belled piles embedded in dry dense sand considering different bell space ratios.Finite element modelling is also performed to evaluate the range of soil failure around the piles during pile uplift displacement.Test results show that when bell space ratio is 6 or 8,the uplift capacity reaches the peak value.The upper bell bears more load than the lower one for the piles with bell space ratio less than 6,while the lower bell bears more load than the upper one for the piles with bell space ratio larger than 8.展开更多
In past terrorist attacks, vehicle borne improvised explosive devices (VBIED) have been the primary manner of attacking buildings and infrastructures. Preventing unauthorized vehicles from approaching a protected area...In past terrorist attacks, vehicle borne improvised explosive devices (VBIED) have been the primary manner of attacking buildings and infrastructures. Preventing unauthorized vehicles from approaching a protected area with anti-ram systems would maintain an established standoff distance against moving and stationary vehicles and consequently reduce blast and debris threats. This strategy has been considered the first line of defence against terrorists. Several types of anti-ram devices have been developed in accordance with U. S. Department of State K-rating criteria, for example, wedge barriers, rising beams, sliding/swing gates, and drop arms. However, these devices typically need a deep foundation for installation and can't be implemented into many locations where a depth of excavation is limited in order to protect utility lines of buildings and infrastructures. This paper presents a recent development of a series of shallow footing anti-ram bollard systems (SFABS) that can satisfy K-12 rating with only five-inch thick footing. A high-fidelity physics based finite element technique with a vehicle crash model is used for predicting anti-ram capacity and determining design parameters of the SFABS. Full-scale vehicle crash tests of the developed SFABS systems have been carried out to validate the design and analysis.展开更多
The comparative research on the seismic performance of grouted sleeve connected pier(GS)and prestressed precast segmental concrete pier(PC)is mostly carried out by numerical simulation.In this study,the GS pier and th...The comparative research on the seismic performance of grouted sleeve connected pier(GS)and prestressed precast segmental concrete pier(PC)is mostly carried out by numerical simulation.In this study,the GS pier and the PC pier of the new railway project from Hetian to Ruoqiang are taken into consideration.Two kinds of 1/5-scale assembled double-column specimens are made,and the quasi-static tests are carried out.The overall seismic performance of the two spliced piers is studied,and compared in terms of failure mechanism,bearing capacity,ductility,stiffness and energy dissipation capacity.The results show that the failure modes of both GS pier and PC pier are characterized by bending.However,the specific failure location and form are different.The GS pier presents a complete hysteretic curve,large equivalent stiffness and strong energy dissipation capacity.The hysteretic area of the PC pier is small.However,it has good self-reset ability and quasi-static residual displacement.Finite element models are set up using DispBeamColumn fiber elements and ZeroLength elements.The models that are calibrated with the test data can effectively simulate the damage development under monotonic loading.The load−displacement curves are in good agreement with the backbone curves of the test results.展开更多
基金International Collaborative Research Project of Sika Technology AG of Switzerland,the Traffic Scientific Research Project in Jiangsu Province (No. 2010Y01)
文摘In order to improve the early-age cracking resistance of concrete, different types of superplasticizers are used. Two types of polycarboxlic salt/acid superplasticizers and one retarding naphthalene superplasticizer are selected to investigate the influence of superplasticizers on the early-age cracking resistance of the concrete by using the slab test and the temperature-stress test. The results show that the polycarboxlic salt/acid superplasticizer cannot always improve the cracking resistance capacity of the concrete compared with the naphthalene superplasticizer, which is related to the chemical structure of the polycarboxlic salt/acid superplasticizer. High plastic tensile strength and dynamic elastic modulus at the early stage are beneficial to avoid cracking, and low hydration heat is also helpful. The evolutions of the drying shrilakage stress and the hydration heat temperature stress varying with time can be comprehensively evaluated by means of the slab test and the temperature stress test.
文摘Nine reinforced concrete (RC) beams strengthened by glass fiber reinforced polymer (GFRP) sheets and three control beams are tested. Four parameters are considered in this experimental program included the concrete strength, the reinforcement ratio, the number of GFRP sheets, and the shear span ratio. It is shown that the application of GFRP sheets can increase the ultimate flexural capacity. The effect of the concrete strength, the reinforcement ratio and the number of GFRP sheets on load capacity is obvious. The shear span ratio can affect the failure mode of RC beams strengthened by GFRP sheets. A theoretical model for flexural behavior of the strengthened RC beam is also developed.
基金Project(51778346) supported by the National Natural Science Foundation of ChinaProject(2019GSF111007) supported by the Key Research and Development Project of Shandong Province of China+1 种基金Project(ZR201808040034) supported by the Natural Science Foundation of Shandong Province of ChinaProject(2015RCJJ010) supported by the Talent Introduction Research Start-up Fund Project of Shandong University of Science and Technology,China。
文摘To optimize the distance between the bells in pile design,this paper reports a series of small scale tests on the uplift capacity of double belled piles embedded in dry dense sand considering different bell space ratios.Finite element modelling is also performed to evaluate the range of soil failure around the piles during pile uplift displacement.Test results show that when bell space ratio is 6 or 8,the uplift capacity reaches the peak value.The upper bell bears more load than the lower one for the piles with bell space ratio less than 6,while the lower bell bears more load than the upper one for the piles with bell space ratio larger than 8.
文摘In past terrorist attacks, vehicle borne improvised explosive devices (VBIED) have been the primary manner of attacking buildings and infrastructures. Preventing unauthorized vehicles from approaching a protected area with anti-ram systems would maintain an established standoff distance against moving and stationary vehicles and consequently reduce blast and debris threats. This strategy has been considered the first line of defence against terrorists. Several types of anti-ram devices have been developed in accordance with U. S. Department of State K-rating criteria, for example, wedge barriers, rising beams, sliding/swing gates, and drop arms. However, these devices typically need a deep foundation for installation and can't be implemented into many locations where a depth of excavation is limited in order to protect utility lines of buildings and infrastructures. This paper presents a recent development of a series of shallow footing anti-ram bollard systems (SFABS) that can satisfy K-12 rating with only five-inch thick footing. A high-fidelity physics based finite element technique with a vehicle crash model is used for predicting anti-ram capacity and determining design parameters of the SFABS. Full-scale vehicle crash tests of the developed SFABS systems have been carried out to validate the design and analysis.
基金Project(N2018G034)supported by China Railway Corporation。
文摘The comparative research on the seismic performance of grouted sleeve connected pier(GS)and prestressed precast segmental concrete pier(PC)is mostly carried out by numerical simulation.In this study,the GS pier and the PC pier of the new railway project from Hetian to Ruoqiang are taken into consideration.Two kinds of 1/5-scale assembled double-column specimens are made,and the quasi-static tests are carried out.The overall seismic performance of the two spliced piers is studied,and compared in terms of failure mechanism,bearing capacity,ductility,stiffness and energy dissipation capacity.The results show that the failure modes of both GS pier and PC pier are characterized by bending.However,the specific failure location and form are different.The GS pier presents a complete hysteretic curve,large equivalent stiffness and strong energy dissipation capacity.The hysteretic area of the PC pier is small.However,it has good self-reset ability and quasi-static residual displacement.Finite element models are set up using DispBeamColumn fiber elements and ZeroLength elements.The models that are calibrated with the test data can effectively simulate the damage development under monotonic loading.The load−displacement curves are in good agreement with the backbone curves of the test results.