With Al2O3 and SiO2 as polishing medium, under different polishing conditions, e.g. with different polishing pressure, polishing time and polishing fluid, the influences of polishing treatment on the return loss of op...With Al2O3 and SiO2 as polishing medium, under different polishing conditions, e.g. with different polishing pressure, polishing time and polishing fluid, the influences of polishing treatment on the return loss of optical fiber connectors were investigated. The return loss of optical fiber connectors is 32CD*238dB before polishing. The results show that dry polishing（i.e. no polishing fluid） with Al2O3 has less influence on return loss of optical fiber connectors, while dry polishing with SiO2 reduces return loss to about 20dB because of the end-face of optical fiber contaminated. The wet polishing（i.e. using distilled water as polishing fluid） with Al2O3 or SiO2 can increase return loss to 45CD*250dB, but wet polishing with Al2O3 may produce optical fiber undercut depth of 80CD*2140nm. Wet polishing with SiO2 should be preferentially selected for optical fiber connectors and polishing time should be controlled within 20CD*230s.展开更多
To enlarge the detection range of traditional fiber-optic spectrometer,two rotating parabolic mirrors were first used in the design of fiber-optic collector for spectrometer,which can extend the detection range of spe...To enlarge the detection range of traditional fiber-optic spectrometer,two rotating parabolic mirrors were first used in the design of fiber-optic collector for spectrometer,which can extend the detection range of spectrometer from centimeter-scale to50m,as a super-low altitude remote sensing detector under passive lighting conditions.According to the performance requirements of fiber-spectrometer for optical collector,this study deduced the calculation formulae of design size of parabolic optical collector applied to different sensitivity spectrometers,different detection targets,different detection ranges and different weathers.Based on the calculation results,the model of fiber-optic collector with a diameter of16mm and a height of7.8mm was designed by ZEMAX.And then,TracePro,a light simulation software,was applied to ray tracing.The simulation results of optical radiation magnification agrees well with theoretical value,and the relative error is less than0.78%.This optical collector can effectively extend the detection range of spectrometer and expand its application fields and scopes.Compared with traditional refractive optical collector,it has several advantages of compact structure,low weight and low cost.展开更多
This paper presents an innovative approach to reusing waste tile granules(TG) and ceramic polishing powder(PP) to produce high performance ceramic tiles.We studied formulations each with a TG mass fraction of 25.0% an...This paper presents an innovative approach to reusing waste tile granules(TG) and ceramic polishing powder(PP) to produce high performance ceramic tiles.We studied formulations each with a TG mass fraction of 25.0% and a different PP mass fraction between 1.0% and 7.0%.The formulations included a small amount of borax additive of a mass fracton between 0.2% and 1.2%.The effects of these industrial by-products on compressive strength,water absorption and microstructure of the new ceramic tiles were investigated.The results indicate that the compressive strength decreases and water absorption increases when TG with a mass fraction of 25.0% are added.Improvement of the compressive strength may be achieved when TG(up to 25.0%) and PP(up to 2.0%) are both used at the same time.In particular,the compressive strength improvement can be maximized and water absorption reduced when a borax additive of up to 0.5% is used as a flux.Scanning electron microscopy reveals that a certain amount of fine PP granules and a high content of fluxing oxides from borax avail the formation of glassy phase that fills up the pores in the new ceramic tiles,resulting in a dense product with high compressive strength and low water absorption.展开更多
The high-performance CPC-trough （compound parabolic concentrator） collector has been developed for the utility scale generation of low temperature solar steam and hot water for low temperature process heat applicati...The high-performance CPC-trough （compound parabolic concentrator） collector has been developed for the utility scale generation of low temperature solar steam and hot water for low temperature process heat applications including solar air conditioning. With an optical concentration of 7.5：1, operating temperatures over 130 ℃ may be reached. This novel design has included a FEM （finite element modeling） validation and is compatible with the standard reflectors and evacuated tubes in the market. The peak efficiencies of 35% with unshielded and more than 45% with evacuated tube receivers were obtained. This CPC-trough collector requires intermittent tracking, i.e., tilt adjustment is only once in a week for more than eight hours collection in summer and six to seven hours in winter seasons.展开更多
In this paper, detailed optical of the solar parabolic dish concentrator is presented. The system has diameter D = 2,800 mm and focal length f = 1,400 mm. The efficient conversion of solar radiation in heat at these t...In this paper, detailed optical of the solar parabolic dish concentrator is presented. The system has diameter D = 2,800 mm and focal length f = 1,400 mm. The efficient conversion of solar radiation in heat at these temperature levels requires a use of concentrating solar collectors. In this paper, detailed optical design of the solar parabolic dish concentrator is presented. The parabolic dish of the solar system consists from 12 curvilinear trapezoidal reflective petals. This paper presents optical simulations of the parabolic solar concentrator unit using the ray-tracing software TracePro. The total flux on receiver and the distribution of irradiance for absorbed flux on center and periphery receiver are given. The total flux at the focal region is 4,031.3 W. The goal of this paper is to present optical design of a low-tech solar concentrator, that can be used as a potentially low-cost tool for laboratory-scale research on the medium-temperature thermal processes, cooling, industrial processes, solar cooking and polygeneration systems, etc.展开更多
This study presents the modeling of a parabolic trough solar collector. The main objective is to show the influences of the parabolic trough sensor effective efficiency （concentrator optical efflciencies of transmiss...This study presents the modeling of a parabolic trough solar collector. The main objective is to show the influences of the parabolic trough sensor effective efficiency （concentrator optical efflciencies of transmission, reflection, geometrical and the receiver absorption coefficient）, of its length, of the mass flow rate on temperatures distributions of the heat fluid and the receiver and on thermal global efficiency （solar conversion efficiency into energy usable）. The atmospheric parameters are those of Senegal in April. A prototype existing in the CERER （Center of Studies and Research on Renewable Energies） （Dakar-Senegal） is given as example of application.展开更多
文摘With Al2O3 and SiO2 as polishing medium, under different polishing conditions, e.g. with different polishing pressure, polishing time and polishing fluid, the influences of polishing treatment on the return loss of optical fiber connectors were investigated. The return loss of optical fiber connectors is 32CD*238dB before polishing. The results show that dry polishing（i.e. no polishing fluid） with Al2O3 has less influence on return loss of optical fiber connectors, while dry polishing with SiO2 reduces return loss to about 20dB because of the end-face of optical fiber contaminated. The wet polishing（i.e. using distilled water as polishing fluid） with Al2O3 or SiO2 can increase return loss to 45CD*250dB, but wet polishing with Al2O3 may produce optical fiber undercut depth of 80CD*2140nm. Wet polishing with SiO2 should be preferentially selected for optical fiber connectors and polishing time should be controlled within 20CD*230s.
基金National Natural Science Foundation of China(No.61376052)State Key Laboratory Program(No.SKT1507)
文摘To enlarge the detection range of traditional fiber-optic spectrometer,two rotating parabolic mirrors were first used in the design of fiber-optic collector for spectrometer,which can extend the detection range of spectrometer from centimeter-scale to50m,as a super-low altitude remote sensing detector under passive lighting conditions.According to the performance requirements of fiber-spectrometer for optical collector,this study deduced the calculation formulae of design size of parabolic optical collector applied to different sensitivity spectrometers,different detection targets,different detection ranges and different weathers.Based on the calculation results,the model of fiber-optic collector with a diameter of16mm and a height of7.8mm was designed by ZEMAX.And then,TracePro,a light simulation software,was applied to ray tracing.The simulation results of optical radiation magnification agrees well with theoretical value,and the relative error is less than0.78%.This optical collector can effectively extend the detection range of spectrometer and expand its application fields and scopes.Compared with traditional refractive optical collector,it has several advantages of compact structure,low weight and low cost.
基金Funded by a grant from the Key Technologies R & D Program of Guangzhou (No. 2004440003110013)
文摘This paper presents an innovative approach to reusing waste tile granules(TG) and ceramic polishing powder(PP) to produce high performance ceramic tiles.We studied formulations each with a TG mass fraction of 25.0% and a different PP mass fraction between 1.0% and 7.0%.The formulations included a small amount of borax additive of a mass fracton between 0.2% and 1.2%.The effects of these industrial by-products on compressive strength,water absorption and microstructure of the new ceramic tiles were investigated.The results indicate that the compressive strength decreases and water absorption increases when TG with a mass fraction of 25.0% are added.Improvement of the compressive strength may be achieved when TG(up to 25.0%) and PP(up to 2.0%) are both used at the same time.In particular,the compressive strength improvement can be maximized and water absorption reduced when a borax additive of up to 0.5% is used as a flux.Scanning electron microscopy reveals that a certain amount of fine PP granules and a high content of fluxing oxides from borax avail the formation of glassy phase that fills up the pores in the new ceramic tiles,resulting in a dense product with high compressive strength and low water absorption.
文摘The high-performance CPC-trough （compound parabolic concentrator） collector has been developed for the utility scale generation of low temperature solar steam and hot water for low temperature process heat applications including solar air conditioning. With an optical concentration of 7.5：1, operating temperatures over 130 ℃ may be reached. This novel design has included a FEM （finite element modeling） validation and is compatible with the standard reflectors and evacuated tubes in the market. The peak efficiencies of 35% with unshielded and more than 45% with evacuated tube receivers were obtained. This CPC-trough collector requires intermittent tracking, i.e., tilt adjustment is only once in a week for more than eight hours collection in summer and six to seven hours in winter seasons.
文摘In this paper, detailed optical of the solar parabolic dish concentrator is presented. The system has diameter D = 2,800 mm and focal length f = 1,400 mm. The efficient conversion of solar radiation in heat at these temperature levels requires a use of concentrating solar collectors. In this paper, detailed optical design of the solar parabolic dish concentrator is presented. The parabolic dish of the solar system consists from 12 curvilinear trapezoidal reflective petals. This paper presents optical simulations of the parabolic solar concentrator unit using the ray-tracing software TracePro. The total flux on receiver and the distribution of irradiance for absorbed flux on center and periphery receiver are given. The total flux at the focal region is 4,031.3 W. The goal of this paper is to present optical design of a low-tech solar concentrator, that can be used as a potentially low-cost tool for laboratory-scale research on the medium-temperature thermal processes, cooling, industrial processes, solar cooking and polygeneration systems, etc.
文摘This study presents the modeling of a parabolic trough solar collector. The main objective is to show the influences of the parabolic trough sensor effective efficiency （concentrator optical efflciencies of transmission, reflection, geometrical and the receiver absorption coefficient）, of its length, of the mass flow rate on temperatures distributions of the heat fluid and the receiver and on thermal global efficiency （solar conversion efficiency into energy usable）. The atmospheric parameters are those of Senegal in April. A prototype existing in the CERER （Center of Studies and Research on Renewable Energies） （Dakar-Senegal） is given as example of application.
