Size effects on plastic deformation behaviors in uniaxial micro tension of pure nickel fine wires were investigated experimentally, including flow stress and inhomogeneous deformation behaviors. It is found that with ...Size effects on plastic deformation behaviors in uniaxial micro tension of pure nickel fine wires were investigated experimentally, including flow stress and inhomogeneous deformation behaviors. It is found that with the increase of grain size or the decrease of number of grains across the diameter, the flow stress decreases and inhomogeneous deformation degree increases. When there are less than 9.3 grains across the diameter, the flow stress decreases quickly with the increase of grain size. Then, the flow stress size effect in micro tension of fine wires is revealed by a proposed model by introducing the grain boundary size factor. These results also indicate that both the fracture strain and stress decrease with the increase of grain size. When there are less than 14.7 grains across the diameter, both the fracture strain and stress decrease quickly. This indicates that the inhomogeneous deformation degree in micro tension increases with the decrease of the number of grains across the diameter. The fracture topography tends to be more and more irregular with the decrease of the number of grains across the diameter. Then, the formation mechanism of irregular fracture topography was analyzed considering the inhomogeneous distribution of microstructure when there are a few grains across the diameter.展开更多
An AZ31 HP magnesium alloy was laser beam welded in autogenous mode with AZ61 filler using Nd-YAG laser system.Microstructural examination revealed that the laser beam weld metals obtained with or without filler mater...An AZ31 HP magnesium alloy was laser beam welded in autogenous mode with AZ61 filler using Nd-YAG laser system.Microstructural examination revealed that the laser beam weld metals obtained with or without filler material had an average grain size of about 12 μm.The microhardness and the tensile strength of the weldments were similar to those of the parent alloy.However,the stress corrosion cracking （SCC） behaviour of both the weldments assessed by slow strain rate tensile （SSRT） tests in ASTM D1384 solution was found to be slightly inferior to that of the parent alloy.It was observed that the stress corrosion cracks originated in the weld metal and propagated through the weld metal-HAZ regions in the autogenous weldment.On the other hand,in the weldment obtained with AZ61 filler material,the crack initiation and propagation was in the HAZ region.The localized damage of the magnesium hydroxide/oxide film formed on the surface of the specimens due to the exposure to the corrosive environment during the SSRT tests was found to be responsible for the SCC.展开更多
基金Projects(51375111,51375113,51505101)supported by the National Natural Science Foundation of ChinaProject(2015M571407)supported by the China Postdoctoral Science Foundation
文摘Size effects on plastic deformation behaviors in uniaxial micro tension of pure nickel fine wires were investigated experimentally, including flow stress and inhomogeneous deformation behaviors. It is found that with the increase of grain size or the decrease of number of grains across the diameter, the flow stress decreases and inhomogeneous deformation degree increases. When there are less than 9.3 grains across the diameter, the flow stress decreases quickly with the increase of grain size. Then, the flow stress size effect in micro tension of fine wires is revealed by a proposed model by introducing the grain boundary size factor. These results also indicate that both the fracture strain and stress decrease with the increase of grain size. When there are less than 14.7 grains across the diameter, both the fracture strain and stress decrease quickly. This indicates that the inhomogeneous deformation degree in micro tension increases with the decrease of the number of grains across the diameter. The fracture topography tends to be more and more irregular with the decrease of the number of grains across the diameter. Then, the formation mechanism of irregular fracture topography was analyzed considering the inhomogeneous distribution of microstructure when there are a few grains across the diameter.
文摘An AZ31 HP magnesium alloy was laser beam welded in autogenous mode with AZ61 filler using Nd-YAG laser system.Microstructural examination revealed that the laser beam weld metals obtained with or without filler material had an average grain size of about 12 μm.The microhardness and the tensile strength of the weldments were similar to those of the parent alloy.However,the stress corrosion cracking （SCC） behaviour of both the weldments assessed by slow strain rate tensile （SSRT） tests in ASTM D1384 solution was found to be slightly inferior to that of the parent alloy.It was observed that the stress corrosion cracks originated in the weld metal and propagated through the weld metal-HAZ regions in the autogenous weldment.On the other hand,in the weldment obtained with AZ61 filler material,the crack initiation and propagation was in the HAZ region.The localized damage of the magnesium hydroxide/oxide film formed on the surface of the specimens due to the exposure to the corrosive environment during the SSRT tests was found to be responsible for the SCC.
