The stretching and folding of fluid element during chaotic mixing field is studied using numerical method. The chaotic mixing process is caused by periodic secondary flow in a twisted curved pipe. Using the nonlinea...The stretching and folding of fluid element during chaotic mixing field is studied using numerical method. The chaotic mixing process is caused by periodic secondary flow in a twisted curved pipe. Using the nonlinear discrete velocity field as the dynamical system, the present study connects the fluid particle's stretching along its trajectory in one period to a linearized time-varying variational equation. After numerical approximation of the variational equation, fluid stretching is calculated on the whole cross section. The stretching distribution shows an exponential fluid stretching and folding, which indicates an excellent mixing performance.展开更多
In this paper, we propose a hybrid PML （H-PML） combining the normal absorption factor of convolutional PML （C-PML） with tangential absorption factor of Mutiaxial PML （M-PML）. The H-PML boundary conditions can be...In this paper, we propose a hybrid PML （H-PML） combining the normal absorption factor of convolutional PML （C-PML） with tangential absorption factor of Mutiaxial PML （M-PML）. The H-PML boundary conditions can better suppress the numerical instability in some extreme models, and the computational speed of finite-element method and the dynamic range are greatly increased using this HPML. We use the finite-element method with a hybrid PML to model the acoustic reflection of the interface when wireline and well logging while drilling （LWD）, in a formation with a reflector outside the borehole. The simulation results suggests that the PS- and SP- reflected waves arrive at the same time when the inclination between the well and the outer interface is zero, and the difference in arrival times increases with increasing dip angle. When there are fractures outside the well, the reflection signal is clearer in the subsequent reflection waves and may be used to identify the fractured zone. The difference between the dominant wavelength and the model scale shows that LWD reflection logging data are of higher resolution and quality than wireline acoustic reflection logging.展开更多
Mixed convection flow of magnetohydrodynamic(MHD) Jeffrey nanofluid over a radially stretching surface with radiative surface is studied. Radial sheet is considered to be convectively heated. Convective boundary condi...Mixed convection flow of magnetohydrodynamic(MHD) Jeffrey nanofluid over a radially stretching surface with radiative surface is studied. Radial sheet is considered to be convectively heated. Convective boundary conditions through heat and mass are employed. The governing boundary layer equations are transformed into ordinary differential equations. Convergent series solutions of the resulting problems are derived. Emphasis has been focused on studying the effects of mixed convection, thermal radiation, magnetic field and nanoparticles on the velocity, temperature and concentration fields. Numerical values of the physical parameters involved in the problem are computed for the local Nusselt and Sherwood numbers are computed.展开更多
The blend ratio and tensile properties are vital important characteristics of blended fibre bundles. Fibre-bundle tensile behaviour has been measured by means of the Sirolan-Tensor in order to derive a typical specifi...The blend ratio and tensile properties are vital important characteristics of blended fibre bundles. Fibre-bundle tensile behaviour has been measured by means of the Sirolan-Tensor in order to derive a typical specific stress — extension curve. According to the typical tensile curve, the relationships between the blend ratio and the tensile parameters are discussed and established. Two new algorithms, so-called the strength method and the work method, have been developed for the blend-ratio estimation of blended fibre bundles. The relevant blend-ratios and calculations of the two methods are defined in detail. Also, the characteristics have been explained for every calculation and compared to each others. The experimental results show that the blend ratios estimated from the theoretical methods are high coincidence with the measured results. Meanwhile, the specific stress — extension curve of blended fibre bundles depends directly on the blend ratios of the fibre bundles.展开更多
基金Supported by the National Natural Science Foundation of China(No.29776039).
文摘The stretching and folding of fluid element during chaotic mixing field is studied using numerical method. The chaotic mixing process is caused by periodic secondary flow in a twisted curved pipe. Using the nonlinear discrete velocity field as the dynamical system, the present study connects the fluid particle's stretching along its trajectory in one period to a linearized time-varying variational equation. After numerical approximation of the variational equation, fluid stretching is calculated on the whole cross section. The stretching distribution shows an exponential fluid stretching and folding, which indicates an excellent mixing performance.
基金supported by the National Natural Science Foundation of China(No.41204094)Science Foundation of China University of Petroleum,Beijing(No.2462015YQ0506)
文摘In this paper, we propose a hybrid PML （H-PML） combining the normal absorption factor of convolutional PML （C-PML） with tangential absorption factor of Mutiaxial PML （M-PML）. The H-PML boundary conditions can better suppress the numerical instability in some extreme models, and the computational speed of finite-element method and the dynamic range are greatly increased using this HPML. We use the finite-element method with a hybrid PML to model the acoustic reflection of the interface when wireline and well logging while drilling （LWD）, in a formation with a reflector outside the borehole. The simulation results suggests that the PS- and SP- reflected waves arrive at the same time when the inclination between the well and the outer interface is zero, and the difference in arrival times increases with increasing dip angle. When there are fractures outside the well, the reflection signal is clearer in the subsequent reflection waves and may be used to identify the fractured zone. The difference between the dominant wavelength and the model scale shows that LWD reflection logging data are of higher resolution and quality than wireline acoustic reflection logging.
文摘Mixed convection flow of magnetohydrodynamic(MHD) Jeffrey nanofluid over a radially stretching surface with radiative surface is studied. Radial sheet is considered to be convectively heated. Convective boundary conditions through heat and mass are employed. The governing boundary layer equations are transformed into ordinary differential equations. Convergent series solutions of the resulting problems are derived. Emphasis has been focused on studying the effects of mixed convection, thermal radiation, magnetic field and nanoparticles on the velocity, temperature and concentration fields. Numerical values of the physical parameters involved in the problem are computed for the local Nusselt and Sherwood numbers are computed.
文摘The blend ratio and tensile properties are vital important characteristics of blended fibre bundles. Fibre-bundle tensile behaviour has been measured by means of the Sirolan-Tensor in order to derive a typical specific stress — extension curve. According to the typical tensile curve, the relationships between the blend ratio and the tensile parameters are discussed and established. Two new algorithms, so-called the strength method and the work method, have been developed for the blend-ratio estimation of blended fibre bundles. The relevant blend-ratios and calculations of the two methods are defined in detail. Also, the characteristics have been explained for every calculation and compared to each others. The experimental results show that the blend ratios estimated from the theoretical methods are high coincidence with the measured results. Meanwhile, the specific stress — extension curve of blended fibre bundles depends directly on the blend ratios of the fibre bundles.
