Nitrogen hydrate samples were synthesized using liquid nitrogen and powder ice at 16 MPa and 253 K. Confocal laser Raman spectroscopy was used to investigate the characteristics of nitrogen clathrate hydrates. The res...Nitrogen hydrate samples were synthesized using liquid nitrogen and powder ice at 16 MPa and 253 K. Confocal laser Raman spectroscopy was used to investigate the characteristics of nitrogen clathrate hydrates. The results show that the Raman peaks of N-N and O-H stretching vibration in nitrogen hydrates are observed at 2322.4 and 3092.1 cm^-1, respectively, which are very similar to those in natural air clathrate hydrates. For comparison, we measured the Raman peaks of N-N stretching vibration both in liquid nitrogen and nitrogen molecules saturated water, which appear at 2326.6 and 2325.0 cm^-1, respectively. The Raman spectroscopic observations on the dissociation process suggest that nitrogen molecules occupy both the large and small cages in nitrogen clathrate hydrates. However, only one Raman peak is observed for N N stretching vibration because the difference of the environment of nitrogen molecules between large and small cages is too small to be differentiated by Raman spectroscopy.展开更多
Filtration efficiency of Ni(II) from aqueous solution using pristine and modified MWCNTs filters was investigated as a function of Ni(II) ion concentration, p H, and filter mass. MWCNTs were synthesized by CVD method ...Filtration efficiency of Ni(II) from aqueous solution using pristine and modified MWCNTs filters was investigated as a function of Ni(II) ion concentration, p H, and filter mass. MWCNTs were synthesized by CVD method and modified using two complementary treatments, purification(using a mixture of hydrochloric acid and hydrogen peroxide) and functionalization(using nitric acid). The effect and mechanism of each treatment on the structural integrity of pristine MWCNTs has been studied. Morphology of the pristine and modified filters was investigated by Raman Spectrometry(RS), Scanning Electron Microscopy(SEM), Energy Dispersive X-ray Spectroscopy(EDS),Fourier Transform Infrared(FTIR) spectrometry and Thermogravimetric analysis. It was found from Raman spectra that the ratio of the intensity of D-band to that of G-band decreased by purification process, and increased by functionalization process. The adsorption mechanism of Ni(II) onto the surface functional groups of modified MWCNTs was confirmed by FTIR spectrum. The filtration results showed that the removal efficiency of Ni(II) is strongly dependent on pH and could reach 85% at pH = 8. Also, modified MWCNT filters can be reused through many cycles of regeneration with high performance. Functionalized MWCNTs filters may be a promising adsorbent candidate for heavy metal removal from wastewater.展开更多
文摘Nitrogen hydrate samples were synthesized using liquid nitrogen and powder ice at 16 MPa and 253 K. Confocal laser Raman spectroscopy was used to investigate the characteristics of nitrogen clathrate hydrates. The results show that the Raman peaks of N-N and O-H stretching vibration in nitrogen hydrates are observed at 2322.4 and 3092.1 cm^-1, respectively, which are very similar to those in natural air clathrate hydrates. For comparison, we measured the Raman peaks of N-N stretching vibration both in liquid nitrogen and nitrogen molecules saturated water, which appear at 2326.6 and 2325.0 cm^-1, respectively. The Raman spectroscopic observations on the dissociation process suggest that nitrogen molecules occupy both the large and small cages in nitrogen clathrate hydrates. However, only one Raman peak is observed for N N stretching vibration because the difference of the environment of nitrogen molecules between large and small cages is too small to be differentiated by Raman spectroscopy.
基金Supported by the Program of MSU Development and Russian Foundation for Basic Research(RFBR)(No.14-02-01230a and No.14-02-31147 mol_a)
文摘Filtration efficiency of Ni(II) from aqueous solution using pristine and modified MWCNTs filters was investigated as a function of Ni(II) ion concentration, p H, and filter mass. MWCNTs were synthesized by CVD method and modified using two complementary treatments, purification(using a mixture of hydrochloric acid and hydrogen peroxide) and functionalization(using nitric acid). The effect and mechanism of each treatment on the structural integrity of pristine MWCNTs has been studied. Morphology of the pristine and modified filters was investigated by Raman Spectrometry(RS), Scanning Electron Microscopy(SEM), Energy Dispersive X-ray Spectroscopy(EDS),Fourier Transform Infrared(FTIR) spectrometry and Thermogravimetric analysis. It was found from Raman spectra that the ratio of the intensity of D-band to that of G-band decreased by purification process, and increased by functionalization process. The adsorption mechanism of Ni(II) onto the surface functional groups of modified MWCNTs was confirmed by FTIR spectrum. The filtration results showed that the removal efficiency of Ni(II) is strongly dependent on pH and could reach 85% at pH = 8. Also, modified MWCNT filters can be reused through many cycles of regeneration with high performance. Functionalized MWCNTs filters may be a promising adsorbent candidate for heavy metal removal from wastewater.
