期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
光伏组件柔性拖曳结构与传统刚性结构风振响应对比
1
作者 郭涛 杨渊茗 +1 位作者 孙震 赵建光 《太阳能学报》 EI CAS CSCD 北大核心 2024年第10期317-325,共9页
为准确探究柔性支撑体系下光伏组件振动特性,以某光伏工程为研究对象,考虑稳定结构及承重结构对整体的影响,分别建立传统刚性支撑体系与柔性支撑下的“系泊-光伏组件阵列结构”有限元模型,基于Davenport风谱采用AR自回归技术模拟脉动风... 为准确探究柔性支撑体系下光伏组件振动特性,以某光伏工程为研究对象,考虑稳定结构及承重结构对整体的影响,分别建立传统刚性支撑体系与柔性支撑下的“系泊-光伏组件阵列结构”有限元模型,基于Davenport风谱采用AR自回归技术模拟脉动风荷载进行风振响应分析,对比两种支撑方式的经济性、风振特性及稳定结构对柔性支撑体系的振动影响。结果表明:1)刚性支撑主要以横向摆动为主,平均振幅约为0.5cm,其风振系数分布均匀,建议取值2.0;2)柔性支撑体系以竖向振动为主,平均振幅约为12.3 cm,比刚性体系振幅大,风振系数建议取值1.7~1.8;3)柔性支撑体系建造成本比传统刚性支撑高出约40%,但占地面积减少约32%。说明柔性支撑在抗风性能、经济性方面都不及传统刚性支撑,但其优势主要在于对地形的高适应性,具有跨度大、净空高、有效提高地面利用率等优点,可在劣势地貌下作为刚性支撑的替代;4)地锚拖曳结构对光伏组件振动有明显约束作用,因此在设计时,地锚拖曳结构的数量、分布调整可作为柔性支撑下光伏阵列的结构优化首选条件,以提高整体稳定性。 展开更多
关键词 光伏组件 柔性支撑 刚性支撑 风振系数 系泊拖曳结构
下载PDF
山区峡谷地形下柔性支撑光伏阵列的风振特性研究 被引量:2
2
作者 郭涛 杨渊茗 +1 位作者 黄国强 张晋铭 《太阳能学报》 EI CAS CSCD 北大核心 2023年第11期131-140,共10页
为准确考察柔性支撑光伏阵列的整体抗风性能,该文以某光伏发电项目为研究对象,建立“系泊-光伏组件阵列结构”整体模型,基于Davenport风谱,采用AR自回归技术模拟脉动风荷载进行风振响应和流场分析。结果表明:1)迎风面边缘体型系数最大,... 为准确考察柔性支撑光伏阵列的整体抗风性能,该文以某光伏发电项目为研究对象,建立“系泊-光伏组件阵列结构”整体模型,基于Davenport风谱,采用AR自回归技术模拟脉动风荷载进行风振响应和流场分析。结果表明:1)迎风面边缘体型系数最大,沿风向呈递减趋势,具有明显梯度。因此,光伏组件表面风荷载分布是非均匀性的,这是光伏组件在风场作用下产生扭摆振动的主要原因。2)阵列外围光伏组件受风场作用的影响最大,为危险区,设计阶段应给予足够重视。3)此光伏阵列风振响应最大幅值约为8.0 cm,与实际工程情况符合;板体之间相互碰撞、发生隐裂的概率较低,柔性承托结构可在部分地形劣态地区作为刚性支撑结构的替代。4)柔性支撑下光伏组件之间纵横向连接紧密,结构刚度分布均匀,风致响应趋势相同,各光伏组件风振响应均以低频振动为主,风振系数为1.7。5)地锚拖曳结构对光伏组件位移有显著约束作用,因此,地锚数量、位置的分布调整可作为柔性支撑下光伏组件阵列的结构优化首选条件。 展开更多
关键词 光伏阵列 柔性支撑 风振响应 数值风洞 风振系数 拖曳结构
下载PDF
3D forward modeling and response analysis for marine CSEMs towed by two ships 被引量:4
3
作者 Zhang Bo Yin Chang-Chun +3 位作者 Liu Yun-He Ren Xiu-Yan Qi Yan-Fu and Cai Jing 《Applied Geophysics》 SCIE CSCD 2018年第1期11-25,147,共16页
A dual-ship-towed marine electromagnetic (EM) system is a new marine exploration technology recently being developed in China. Compared with traditional marine EM systems, the new system tows the transmitters and re... A dual-ship-towed marine electromagnetic (EM) system is a new marine exploration technology recently being developed in China. Compared with traditional marine EM systems, the new system tows the transmitters and receivers using two ships, rendering it unnecessary to position EM receivers at the seafloor in advance. This makes the system more flexible, allowing for different configurations (e.g., in-line, broadside, and azimuthal and concentric scanning) that can produce more detailed underwater structural information. We develop a three-dimensional goal-oriented adaptive forward modeling method for the new marine EM system and analyze the responses for four survey configurations. Ocean-ottom topography has a strong effect on the marine EM responses; thus, we develop a forward modeling algorithm based on the finite-element method and unstructured grids. To satisfy the requirements for modeling the moving transmitters of a dual-ship-towed EM system, we use a single mesh for each of the transmitter locations. This mitigates the mesh complexity by refining the grids near the transmitters and minimizes the computational cost. To generate a rational mesh while maintaining the accuracy for single transmitter, we develop a goal-oriented adaptive method with separate mesh refinements for areas around the transmitting source and those far away. To test the modeling algorithm and accuracy, we compare the EM responses calculated by the proposed algorithm and semi-analytical results and from published sources. Furthermore, by analyzing the EM responses for four survey configurations, we are confirm that compared with traditional marine EM systems with only in-line array, a dual-ship-towed marine system can collect more data. 展开更多
关键词 MARINE ELECTROMAGNETICS dual-ship-towing SEAFLOOR MODELING
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部