According to experimental data available for the complex refractive index of particular dielectrics, a dielectric spectrum formula is proposed by the least square fitting technique combined with selected natural frequ...According to experimental data available for the complex refractive index of particular dielectrics, a dielectric spectrum formula is proposed by the least square fitting technique combined with selected natural frequencies. From the dielectric spectrum formula, the spectra of optical and dielectric constants can be obtained in the whole frequency region. Three dielectrics, water, ethanol, and toluene, are taken as examples. In the region where the ex- perimental data are available, the spectra of the optical constants calculated by the formula are in good agreement with the real refractive spectrum obtained by Kramers-Kronig （K-K） transform and the experimental imaginary refractive spectrum. In the region where no ex- perimental data are available, the extrapolation of our formula can make predictions. The merits of the present treatment are that we are able to get the uniform spectrum formula, without splitting into different frequency sections, and the analytical form of the dielectric spectra will be useful in the theoretical description of solvation dynamics.展开更多
Accurate hydrodynamic calculations for semi-submersibles are critical to support modern rapid exploration and extraction of ocean resources. In order to speed hydrodynamic calculations, lines modeling structures were ...Accurate hydrodynamic calculations for semi-submersibles are critical to support modern rapid exploration and extraction of ocean resources. In order to speed hydrodynamic calculations, lines modeling structures were separated into structural parts and then fitted to Non-uniform Rational B-spline (NURBS). In this way, the bow and stern section lines were generated. Modeling of the intersections of the parts was then done with the universal modeling tool MSC.Patran. Mesh was gererated on the model in order to obtain points of intersection on the joints, and then these points were fitted to NURBS. Next, the patch representation method was adopted to generate the meshes of wetted surfaces and interior free surfaces. Velocity potentials on the surfaces were calculated separately, on basis of which the irregular frequency effect was dealt with in the calculation of hydrodynamic coefficients. Finally, the motion response of the semi-submersible was calculated, and in order to improve calculations of vertical motion, a damping term was affixed in the vertical direction. The results show that the above methods can generate fine mesh accurately representing the wetted surface of a semi-submersible and thus improve the accuracy of hydrodynamic calculations.展开更多
During the 3D shape measurement,there are noises in the images that are obtained by the capture system.The traditional method,Fourier transform profilometry(FTP) technique,improves the accuracy only by the filtering m...During the 3D shape measurement,there are noises in the images that are obtained by the capture system.The traditional method,Fourier transform profilometry(FTP) technique,improves the accuracy only by the filtering method in the frequency domain.In this paper,the curve fitting method is used for the light field distribution calculation before the filtering process applied in the frequency domain by choosing a suitable filter window,and then the higher quality of the basic frequency component signal is got.This method can avoid the frequency overlapping caused by the noise,so the improvement of the measuring accuracy of FTP is realized.展开更多
The quantitative photoacoustic investigation of different TiO2 thin films on Si substrates is presented using the elastic bending method. Photoacoustic signal amplitude and phase spectra versus modulation frequency we...The quantitative photoacoustic investigation of different TiO2 thin films on Si substrates is presented using the elastic bending method. Photoacoustic signal amplitude and phase spectra versus modulation frequency were measured and analyzed using different sample thicknesses. Within the proposed method particular attention is given to the analysis of optical, thermal, elastic and structural sample parameters. Considerable focus is devoted to the fitting procedure of experimental results using the two-layer sample theoretical model. Characteristics of previously developed photoacoustic apparatus are discussed, attempting to search the ideal experimental conditions which can provide a good signal-to-noise ratio and sensitivity.展开更多
基金This work was supported by the National Natural Science Foundation of China （No.20533070 and No.20873087）.
文摘According to experimental data available for the complex refractive index of particular dielectrics, a dielectric spectrum formula is proposed by the least square fitting technique combined with selected natural frequencies. From the dielectric spectrum formula, the spectra of optical and dielectric constants can be obtained in the whole frequency region. Three dielectrics, water, ethanol, and toluene, are taken as examples. In the region where the ex- perimental data are available, the spectra of the optical constants calculated by the formula are in good agreement with the real refractive spectrum obtained by Kramers-Kronig （K-K） transform and the experimental imaginary refractive spectrum. In the region where no ex- perimental data are available, the extrapolation of our formula can make predictions. The merits of the present treatment are that we are able to get the uniform spectrum formula, without splitting into different frequency sections, and the analytical form of the dielectric spectra will be useful in the theoretical description of solvation dynamics.
文摘Accurate hydrodynamic calculations for semi-submersibles are critical to support modern rapid exploration and extraction of ocean resources. In order to speed hydrodynamic calculations, lines modeling structures were separated into structural parts and then fitted to Non-uniform Rational B-spline (NURBS). In this way, the bow and stern section lines were generated. Modeling of the intersections of the parts was then done with the universal modeling tool MSC.Patran. Mesh was gererated on the model in order to obtain points of intersection on the joints, and then these points were fitted to NURBS. Next, the patch representation method was adopted to generate the meshes of wetted surfaces and interior free surfaces. Velocity potentials on the surfaces were calculated separately, on basis of which the irregular frequency effect was dealt with in the calculation of hydrodynamic coefficients. Finally, the motion response of the semi-submersible was calculated, and in order to improve calculations of vertical motion, a damping term was affixed in the vertical direction. The results show that the above methods can generate fine mesh accurately representing the wetted surface of a semi-submersible and thus improve the accuracy of hydrodynamic calculations.
基金supported by the Natural Science Foundation of Tianjin Municipal Science and Technology Commission (No. 06YFJMC15600)
文摘During the 3D shape measurement,there are noises in the images that are obtained by the capture system.The traditional method,Fourier transform profilometry(FTP) technique,improves the accuracy only by the filtering method in the frequency domain.In this paper,the curve fitting method is used for the light field distribution calculation before the filtering process applied in the frequency domain by choosing a suitable filter window,and then the higher quality of the basic frequency component signal is got.This method can avoid the frequency overlapping caused by the noise,so the improvement of the measuring accuracy of FTP is realized.
基金supported by the Ministry of Science and Technological Development of the Republic of Serbia(Grant No. 171016)the Slovenian Research Agency(Grant Nos. BI-RS/08-09-041 and P1-0034)
文摘The quantitative photoacoustic investigation of different TiO2 thin films on Si substrates is presented using the elastic bending method. Photoacoustic signal amplitude and phase spectra versus modulation frequency were measured and analyzed using different sample thicknesses. Within the proposed method particular attention is given to the analysis of optical, thermal, elastic and structural sample parameters. Considerable focus is devoted to the fitting procedure of experimental results using the two-layer sample theoretical model. Characteristics of previously developed photoacoustic apparatus are discussed, attempting to search the ideal experimental conditions which can provide a good signal-to-noise ratio and sensitivity.
