In CSEM exploration, the receivers are generally located about three to five times the skin depth from the transmitter. In this paper, we study the effect of a conductor between the transmitter and the survey area on ...In CSEM exploration, the receivers are generally located about three to five times the skin depth from the transmitter. In this paper, we study the effect of a conductor between the transmitter and the survey area on the target conductor response using forward modeling and inversion. The 2D forward finite element calculations show that the conductor mainly affects the response at middle and low frequencies. The lower the resistivity and the larger the conductor, the larger the effect and the effect increases with decreasing frequency. The inversion results indicate that the calculated position of the target body can move towards the source, leading to an incorrect interpretation without considering the conductor. In order to reduce the effect of a conductor between the source and the survey area, CSEM acquisition should be conducted in three dimensions using multiple sources and 3D inversion should be used during interpretation.展开更多
Single-poly,576bit non-volatile memory is designed and implemented in an SMIC 0.18μm standard CMOS process for the purpose of reducing the cost and power of passive RFID tag chips. The memory bit cell is designed wit...Single-poly,576bit non-volatile memory is designed and implemented in an SMIC 0.18μm standard CMOS process for the purpose of reducing the cost and power of passive RFID tag chips. The memory bit cell is designed with conventional single-poly pMOS transistors, based on the bi-directional Fowler-Nordheim tunneling effect, and the typical program/erase time is 10ms for every 16bits. A new ,single-ended sense amplifier is proposed to reduce the power dissipation in the current sensing scheme. The average current consumption of the whole memory chip is 0.8μA for the power supply voltage of 1.2V at a reading rate of 640kHz.展开更多
The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power...The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power management module.The main receiver adopts a unified simplified synchronization method and channel codec with proactive Reed-Solomon Bypass technique,which increases the robustness and energy efficiency of receiver.The WUI receiver specifies the communication node and wakes up the transceiver to reduce average power consumption of the transceiver.The embedded NVM can backup/restore the states information of processor that avoids the loss of the state information caused by power failure and reduces the unnecessary power of repetitive computation when the processor is waked up from power down mode.The baseband processor is designed and verified on a FPGA board.The simulated power consumption of processor is 5.1uW for transmitting and 28.2μW for receiving.The WUI receiver technique reduces the average power consumption of transceiver remarkably.If the transceiver operates 30 seconds in every 15 minutes,the average power consumption of the transceiver can be reduced by two orders of magnitude.The NVM avoids the loss of the state information caused by power failure and energy waste caused by repetitive computation.展开更多
The textile processing plants utilize a wide variety of dyes and other chemicals such as acids, bases, salts, detergents, sizes, oxidants, mercerizing and finishing chemicals. Many of these are not retained in the fin...The textile processing plants utilize a wide variety of dyes and other chemicals such as acids, bases, salts, detergents, sizes, oxidants, mercerizing and finishing chemicals. Many of these are not retained in the final product and are discharged in the effluent. Therefore, the objective of this study was to assess the performance of EGSB （Expanded Granular Sludge Bed） reactor to treat non-acidifie wastewater. Several experiments using starch and volatile fatty acids as model substrates were conducted. The problems of piston formation were evaluated at a variety of relevant operational conditions, such as substrate concentration, organic and hydraulic loading rates. The results showed that newly grown acidogenic biomass diluted original methanogenic biomass and the granular sludge in the EGSB reactor deteriorated. The piston formation in the EGSB reactor that was fed with non-acidified wastewater occurred due to high growth of acidogenic biomass and high upflow velocity applied in the system.展开更多
In this paper, we produce porous silicon （PSi） by electrochemical etching, and it is the first time to evaluate the performance of label-free porous silicon biosensor for detection of variable domain of heavy chain ...In this paper, we produce porous silicon （PSi） by electrochemical etching, and it is the first time to evaluate the performance of label-free porous silicon biosensor for detection of variable domain of heavy chain of heavy-chain antibody （VHH）. The binding of hen egg white lysozyme （HEWL） and VHH causes a red shift in the reflection spectrum of the biosensor. The red shift is proportional to the VHH concenlration in the range from 14 gg.ml-I to 30 pg.ml~ with a detection limit of 0.648 ng.ml~. The research is useful for the development of label-free biosensor applied in the rapid and sensitive determination of small molecules.展开更多
基金supported by the Project kzcx2-yw-113,kzcx2-yw-121 and kzcx1-yw-15-4,CAS
文摘In CSEM exploration, the receivers are generally located about three to five times the skin depth from the transmitter. In this paper, we study the effect of a conductor between the transmitter and the survey area on the target conductor response using forward modeling and inversion. The 2D forward finite element calculations show that the conductor mainly affects the response at middle and low frequencies. The lower the resistivity and the larger the conductor, the larger the effect and the effect increases with decreasing frequency. The inversion results indicate that the calculated position of the target body can move towards the source, leading to an incorrect interpretation without considering the conductor. In order to reduce the effect of a conductor between the source and the survey area, CSEM acquisition should be conducted in three dimensions using multiple sources and 3D inversion should be used during interpretation.
文摘Single-poly,576bit non-volatile memory is designed and implemented in an SMIC 0.18μm standard CMOS process for the purpose of reducing the cost and power of passive RFID tag chips. The memory bit cell is designed with conventional single-poly pMOS transistors, based on the bi-directional Fowler-Nordheim tunneling effect, and the typical program/erase time is 10ms for every 16bits. A new ,single-ended sense amplifier is proposed to reduce the power dissipation in the current sensing scheme. The average current consumption of the whole memory chip is 0.8μA for the power supply voltage of 1.2V at a reading rate of 640kHz.
基金supported in part by the National Natural Science Foundation of China(No.61306027)
文摘The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power management module.The main receiver adopts a unified simplified synchronization method and channel codec with proactive Reed-Solomon Bypass technique,which increases the robustness and energy efficiency of receiver.The WUI receiver specifies the communication node and wakes up the transceiver to reduce average power consumption of the transceiver.The embedded NVM can backup/restore the states information of processor that avoids the loss of the state information caused by power failure and reduces the unnecessary power of repetitive computation when the processor is waked up from power down mode.The baseband processor is designed and verified on a FPGA board.The simulated power consumption of processor is 5.1uW for transmitting and 28.2μW for receiving.The WUI receiver technique reduces the average power consumption of transceiver remarkably.If the transceiver operates 30 seconds in every 15 minutes,the average power consumption of the transceiver can be reduced by two orders of magnitude.The NVM avoids the loss of the state information caused by power failure and energy waste caused by repetitive computation.
文摘The textile processing plants utilize a wide variety of dyes and other chemicals such as acids, bases, salts, detergents, sizes, oxidants, mercerizing and finishing chemicals. Many of these are not retained in the final product and are discharged in the effluent. Therefore, the objective of this study was to assess the performance of EGSB （Expanded Granular Sludge Bed） reactor to treat non-acidifie wastewater. Several experiments using starch and volatile fatty acids as model substrates were conducted. The problems of piston formation were evaluated at a variety of relevant operational conditions, such as substrate concentration, organic and hydraulic loading rates. The results showed that newly grown acidogenic biomass diluted original methanogenic biomass and the granular sludge in the EGSB reactor deteriorated. The piston formation in the EGSB reactor that was fed with non-acidified wastewater occurred due to high growth of acidogenic biomass and high upflow velocity applied in the system.
基金supported by the National Natural Science Foundation of China (No.60968002)
文摘In this paper, we produce porous silicon （PSi） by electrochemical etching, and it is the first time to evaluate the performance of label-free porous silicon biosensor for detection of variable domain of heavy chain of heavy-chain antibody （VHH）. The binding of hen egg white lysozyme （HEWL） and VHH causes a red shift in the reflection spectrum of the biosensor. The red shift is proportional to the VHH concenlration in the range from 14 gg.ml-I to 30 pg.ml~ with a detection limit of 0.648 ng.ml~. The research is useful for the development of label-free biosensor applied in the rapid and sensitive determination of small molecules.
