According to the structure and stress trait of bearing bolts,a lateral-vibrationmechanics model was established for them,and the relation between lateral-vibration frequencyand axial load was analyzed;then,lateral-vib...According to the structure and stress trait of bearing bolts,a lateral-vibrationmechanics model was established for them,and the relation between lateral-vibration frequencyand axial load was analyzed;then,lateral-vibration trait of bearing bolts was studiedthrough laboratory simulation test.The results indicate that vibration frequency of boltsupport system increases as well as axial force,the detection on axial load of bolts can bemade by generating lateral vibration of bearing bolts.Theoretical and experimental researchresults show that frequency method is effective for detecting the axial force of boltsupport system.展开更多
This paper describes the experimental study on shock response of FDB （fluid dynamic bearing） spindle for HDDs （hard disk drives）. The FDBs are widely used as rotating shaft support elements for HDD spindle motors....This paper describes the experimental study on shock response of FDB （fluid dynamic bearing） spindle for HDDs （hard disk drives）. The FDBs are widely used as rotating shaft support elements for HDD spindle motors. Recently, the opportunity for the HDD spindle motors exposed to external vibration has been increasing because the HDDs are used for various information related equipment such as mobile PCs （personal computers）, video cameras, car navigation systems and so on. Hence, the rotating shaft has a possibility to come in contact with the bearing by external shocks and it causes wear or seizure to the bearing surface. To avoid the problem, it is extremely important to know how the spindle moves against the large shock on HDDs experimentally. However, as far as the authors know, there are few experimental studies treating the shock response of HDD spindles. In this paper, firstly, we propose a new test rig and experimental method for shock response of FDB spindles. Then the shock tests against the radial and axial disturbance on FDB spindle for 2.5＂ HDD are conducted. Finally, the experimental results of shock response waveforms and maximum displacement of disk are shown.展开更多
We focus on the hysteretic characteristics of the varying compliance(VC) principal resonance in a ball bearing. The branches of the periodic VC response are traced by the harmonic balance method and the alternating fr...We focus on the hysteretic characteristics of the varying compliance(VC) principal resonance in a ball bearing. The branches of the periodic VC response are traced by the harmonic balance method and the alternating frequency/time domain technique(HB-AFT) embedding Arc-length continuation, and the stability of these solutions is investigated by using Floquet theory. We find that the resonant response displays a swallow-tail structure due to the coupling nonlinearities between the Hertzian contact and the bearing clearance, which differs from the soft hysteresis of the non-loss Hertzian contact resonances. Furthermore, we find that period-1 VC branch cannot completely characterize the response of the system for a large bearing clearance, because multiple instability regions may occur from the cyclic fold, the secondary Hopf bifurcations, supercritical and subcritical period doubling bifurcations, in which case co-existences of period-1, period-2, and even quasi-periodic VC motions emerge in the hysteretic resonant range.展开更多
Time-varying stiffness is one of the most important dynamic characteristics of rolling element bearings.The method of analyzing the elements in the bearing stiffness matrix is usually adopted to investigate the charac...Time-varying stiffness is one of the most important dynamic characteristics of rolling element bearings.The method of analyzing the elements in the bearing stiffness matrix is usually adopted to investigate the characteristics of bearing stiffness.Linear mapping structure of the bearing stiffness matrix is helpful to understand the varying compliance excitation and its influence on vibration transmission.In this study,a method to analyze the mapping structure of bearing stiffness matrix is proposed based on the singular value decomposition of block matrices in the stiffness matrix.Not only does this method have the advantages of coordinate transformation independence and unit independence,but also the analysis procedure involved is geometrically intuitive.The time-varying stiffness matrix of double-row tapered bearing is calculated and analyzed using the proposed method under two representative load cases.The principal stiffnesses and principal axes defined in the method together indicate the dominant and insignificant stiffness properties with the corresponding directions,and the vibration transmission properties are also revealed.Besides,the coupling behaviors between different shaft motions are found during the analysis of mapping structure.The mechanism of the generation of varying compliance excitation is also revealed.展开更多
基金Supported by the National Natural Science Foundation of China(50674046)National Natural Science Important Foundation of China(50634050)National Basic Research Program of China(2007CB209400)
文摘According to the structure and stress trait of bearing bolts,a lateral-vibrationmechanics model was established for them,and the relation between lateral-vibration frequencyand axial load was analyzed;then,lateral-vibration trait of bearing bolts was studiedthrough laboratory simulation test.The results indicate that vibration frequency of boltsupport system increases as well as axial force,the detection on axial load of bolts can bemade by generating lateral vibration of bearing bolts.Theoretical and experimental researchresults show that frequency method is effective for detecting the axial force of boltsupport system.
文摘This paper describes the experimental study on shock response of FDB （fluid dynamic bearing） spindle for HDDs （hard disk drives）. The FDBs are widely used as rotating shaft support elements for HDD spindle motors. Recently, the opportunity for the HDD spindle motors exposed to external vibration has been increasing because the HDDs are used for various information related equipment such as mobile PCs （personal computers）, video cameras, car navigation systems and so on. Hence, the rotating shaft has a possibility to come in contact with the bearing by external shocks and it causes wear or seizure to the bearing surface. To avoid the problem, it is extremely important to know how the spindle moves against the large shock on HDDs experimentally. However, as far as the authors know, there are few experimental studies treating the shock response of HDD spindles. In this paper, firstly, we propose a new test rig and experimental method for shock response of FDB spindles. Then the shock tests against the radial and axial disturbance on FDB spindle for 2.5＂ HDD are conducted. Finally, the experimental results of shock response waveforms and maximum displacement of disk are shown.
基金supported by the National Basic Research Program of China("973"Project)(Grant No.2015CB057400)the China Postdoctoral Science Foundation(Grant No.2013M541360)the National Natural Science Foundation of China(Grant Nos.10632040 and 11302058)
文摘We focus on the hysteretic characteristics of the varying compliance(VC) principal resonance in a ball bearing. The branches of the periodic VC response are traced by the harmonic balance method and the alternating frequency/time domain technique(HB-AFT) embedding Arc-length continuation, and the stability of these solutions is investigated by using Floquet theory. We find that the resonant response displays a swallow-tail structure due to the coupling nonlinearities between the Hertzian contact and the bearing clearance, which differs from the soft hysteresis of the non-loss Hertzian contact resonances. Furthermore, we find that period-1 VC branch cannot completely characterize the response of the system for a large bearing clearance, because multiple instability regions may occur from the cyclic fold, the secondary Hopf bifurcations, supercritical and subcritical period doubling bifurcations, in which case co-existences of period-1, period-2, and even quasi-periodic VC motions emerge in the hysteretic resonant range.
基金the Joint Funds of the National Natural Science Foundation of China(Grant No.U1834202).
文摘Time-varying stiffness is one of the most important dynamic characteristics of rolling element bearings.The method of analyzing the elements in the bearing stiffness matrix is usually adopted to investigate the characteristics of bearing stiffness.Linear mapping structure of the bearing stiffness matrix is helpful to understand the varying compliance excitation and its influence on vibration transmission.In this study,a method to analyze the mapping structure of bearing stiffness matrix is proposed based on the singular value decomposition of block matrices in the stiffness matrix.Not only does this method have the advantages of coordinate transformation independence and unit independence,but also the analysis procedure involved is geometrically intuitive.The time-varying stiffness matrix of double-row tapered bearing is calculated and analyzed using the proposed method under two representative load cases.The principal stiffnesses and principal axes defined in the method together indicate the dominant and insignificant stiffness properties with the corresponding directions,and the vibration transmission properties are also revealed.Besides,the coupling behaviors between different shaft motions are found during the analysis of mapping structure.The mechanism of the generation of varying compliance excitation is also revealed.
