Aluminum alloy is used as the support of final optical assembly because of its excellent mechanical properties,which constitutes th e“skeleton”of high-power laser system.Stray light reflected by weak optical element...Aluminum alloy is used as the support of final optical assembly because of its excellent mechanical properties,which constitutes th e“skeleton”of high-power laser system.Stray light reflected by weak optical elements in high power laser system will fall on the inner wall frame of aluminum alloy,which will cause damage and produce impurity particles,polluting the entire optical system.However,the research on the damage mechanism and protection technology of aluminum alloy under the action of high-power laser system is still in the initial stage.This paper introduces the interaction mechanism between laser and materials,analyzes the laser damage mechanism of aluminum alloy from the perspective of plasma nano metal particle ablation,reviews the progress of laser-induced damage protection of aluminum alloy,and prospects the future research direction of laser absorption and damage protection technology of aluminum alloy under the action of high-energy laser.展开更多
The corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys sliding against Al2O3 in artificial seawater using a pin-on-disk test rig were investigated. And the synergistic effect between...The corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys sliding against Al2O3 in artificial seawater using a pin-on-disk test rig were investigated. And the synergistic effect between corrosion and wear was emphatically evaluated. The results show that the open circuit potentials of both alloys drop down to more negative value due to friction. The corrosion current densities obtained under tribocorrosion condition are much higher than those under corrosion-only condition. Friction obviously accelerates the corrosion of the alloys. The wear loss for both alloys is larger in seawater than that in pure water. Wear loss is obviously accelerated by corrosion. And AISI 316 stainless steel is less resistant to sliding damage than Ti6Al4V alloy. The synergistic effect between wear and corrosion is a significant factor for the materials loss in tribocorrosion. In this surface-on-surface contact geometry friction system, the material loss is large but the ratio of wear-accelerated-corrosion to the total wear loss is very low.展开更多
基金Project(AUGA5630112723)supported by the Assistant Professor Research Initiation Project of Harbin Institute of Technology,China。
文摘Aluminum alloy is used as the support of final optical assembly because of its excellent mechanical properties,which constitutes th e“skeleton”of high-power laser system.Stray light reflected by weak optical elements in high power laser system will fall on the inner wall frame of aluminum alloy,which will cause damage and produce impurity particles,polluting the entire optical system.However,the research on the damage mechanism and protection technology of aluminum alloy under the action of high-power laser system is still in the initial stage.This paper introduces the interaction mechanism between laser and materials,analyzes the laser damage mechanism of aluminum alloy from the perspective of plasma nano metal particle ablation,reviews the progress of laser-induced damage protection of aluminum alloy,and prospects the future research direction of laser absorption and damage protection technology of aluminum alloy under the action of high-energy laser.
基金Project (LSL-1310) supported by the Open Project of State Key Laboratory of Solid Lubrication,Collaborative Innovation Center of Nonferrous Metals of Henan Province,ChinaProject (51171059) supported by the National Natural Science Foundation of China
文摘The corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys sliding against Al2O3 in artificial seawater using a pin-on-disk test rig were investigated. And the synergistic effect between corrosion and wear was emphatically evaluated. The results show that the open circuit potentials of both alloys drop down to more negative value due to friction. The corrosion current densities obtained under tribocorrosion condition are much higher than those under corrosion-only condition. Friction obviously accelerates the corrosion of the alloys. The wear loss for both alloys is larger in seawater than that in pure water. Wear loss is obviously accelerated by corrosion. And AISI 316 stainless steel is less resistant to sliding damage than Ti6Al4V alloy. The synergistic effect between wear and corrosion is a significant factor for the materials loss in tribocorrosion. In this surface-on-surface contact geometry friction system, the material loss is large but the ratio of wear-accelerated-corrosion to the total wear loss is very low.
