Maintaining caprock integrity is prerequisite for hydrocarbon accumulation. And gypsolyte caprock integrity is mainly affected by fracturing. Composition, damage behavior and mechanical strength of Paleocene Artashi F...Maintaining caprock integrity is prerequisite for hydrocarbon accumulation. And gypsolyte caprock integrity is mainly affected by fracturing. Composition, damage behavior and mechanical strength of Paleocene Artashi Formation gypsolyte rock that seals significant petroleum in the Kashi Sag of Tarim Basin had been revealed via X-ray diffraction and triaxial compression test. The results indicate the Artashi Formation can be lithologically divided into the lower and upper lithologic members. The lower member comprises gypsum as the dominant mineral, and the cohesion and friction coefficient are 8 MPa and 0.315, respectively. Similarly, the upper lithologic member consists mainly of anhydrite at the cohesion and coefficient of internal friction values of 18 MPa and 0.296. Given that the failure criterion and brittle-ductile transition factors during burial, the sealing integrity of Artashi Formation can be quantized for seven different stages. The reservoirs at the bottom of Artashi Formation caprock buried from 2285 m to 3301 m are expected to be the most favorable exploration target in the Kashi Sag.展开更多
The objective of this investigation was to study whether it is possible to determine the air tightness of covered slurry storage tanks using tracer gas technique by injection of sulphur hexafluoride （SF6） and measur...The objective of this investigation was to study whether it is possible to determine the air tightness of covered slurry storage tanks using tracer gas technique by injection of sulphur hexafluoride （SF6） and measurements of the decay in gas concentrations with an infrared spectrophotometer in the air space above the slurry. By measuring the decay in concentration of injected tracer gas at different occasions, the air exchange rate was determined. Three different types of coverings were studied namely; wooden roof, plastic tent and concrete roof.展开更多
A novel scheme of all-optical AND gate based on a Fabry-Perot semiconductor optical amplifier(FP-SOA) is proposed and its feasibility is verified by simulation. Using this scheme, all-optical AND gate can be realized ...A novel scheme of all-optical AND gate based on a Fabry-Perot semiconductor optical amplifier(FP-SOA) is proposed and its feasibility is verified by simulation. Using this scheme, all-optical AND gate can be realized with the extinction ratio of 10 dB. The influence of pulse interval and pulse width on the extinction ratio is also investigated.展开更多
The continuing increase in IC （Integrated Circuit） power levels and microelectronics packaging densities has resulted in the need for detailed considerations of the heat sink design for integrated circuits. One of t...The continuing increase in IC （Integrated Circuit） power levels and microelectronics packaging densities has resulted in the need for detailed considerations of the heat sink design for integrated circuits. One of the major components in the heat sink is the heat spreader which must be designed to effectively conduct the heat dissipated from the chip to a system of fins or extended surfaces for convective heat transfer to a flow of coolant. The heat spreader design must provide the capability to dissipate the thermal energy generated by the chip. However, the design of the heat spreader is also dependent on the convection characteristics of the fins within the heat sink, as well the material and geometry of the heat spreader. This paper focuses on the optimization of heat spreaders in a heat sink for safe and efficient performance of electronic circuits. The results of the study show that, for air-cooled electronics, the convective effects may dominate the thermal transport performance of the heat spreader in the heat sink.展开更多
This paper studies the first passage time problem for a reflected two-sided jump-diffusion risk model with the jumps having a hyper-Erlang distribution.The authors give the explicit closed-form expression for the join...This paper studies the first passage time problem for a reflected two-sided jump-diffusion risk model with the jumps having a hyper-Erlang distribution.The authors give the explicit closed-form expression for the joint Laplace transform of the first passage time and the overshoot for the reflected process.Finally,the formula is applied to the ruin problem under the barrier dividend strategy and the pricing of the Russian option.展开更多
The changes of numeraire can be used as a very powerful tool in pricing contingent claims in the context of a complete market.By using the method of numeraire changes to evaluate convertible bonds when the value of fi...The changes of numeraire can be used as a very powerful tool in pricing contingent claims in the context of a complete market.By using the method of numeraire changes to evaluate convertible bonds when the value of firm,and those of zero-coupon bonds follow general adapted stochastic processes in this paper,using Ito theorem and Gisanov theorem.A closed-form solution is derived under the stochastic volatility by using fast Fourier transforms.展开更多
基金Project(41672121)supported by the National Natural Science Foundation of ChinaProject(D1438)supported by the China Geological Survey
文摘Maintaining caprock integrity is prerequisite for hydrocarbon accumulation. And gypsolyte caprock integrity is mainly affected by fracturing. Composition, damage behavior and mechanical strength of Paleocene Artashi Formation gypsolyte rock that seals significant petroleum in the Kashi Sag of Tarim Basin had been revealed via X-ray diffraction and triaxial compression test. The results indicate the Artashi Formation can be lithologically divided into the lower and upper lithologic members. The lower member comprises gypsum as the dominant mineral, and the cohesion and friction coefficient are 8 MPa and 0.315, respectively. Similarly, the upper lithologic member consists mainly of anhydrite at the cohesion and coefficient of internal friction values of 18 MPa and 0.296. Given that the failure criterion and brittle-ductile transition factors during burial, the sealing integrity of Artashi Formation can be quantized for seven different stages. The reservoirs at the bottom of Artashi Formation caprock buried from 2285 m to 3301 m are expected to be the most favorable exploration target in the Kashi Sag.
文摘The objective of this investigation was to study whether it is possible to determine the air tightness of covered slurry storage tanks using tracer gas technique by injection of sulphur hexafluoride （SF6） and measurements of the decay in gas concentrations with an infrared spectrophotometer in the air space above the slurry. By measuring the decay in concentration of injected tracer gas at different occasions, the air exchange rate was determined. Three different types of coverings were studied namely; wooden roof, plastic tent and concrete roof.
基金National Nature Science Foundation of China(60572008)
文摘A novel scheme of all-optical AND gate based on a Fabry-Perot semiconductor optical amplifier(FP-SOA) is proposed and its feasibility is verified by simulation. Using this scheme, all-optical AND gate can be realized with the extinction ratio of 10 dB. The influence of pulse interval and pulse width on the extinction ratio is also investigated.
文摘The continuing increase in IC （Integrated Circuit） power levels and microelectronics packaging densities has resulted in the need for detailed considerations of the heat sink design for integrated circuits. One of the major components in the heat sink is the heat spreader which must be designed to effectively conduct the heat dissipated from the chip to a system of fins or extended surfaces for convective heat transfer to a flow of coolant. The heat spreader design must provide the capability to dissipate the thermal energy generated by the chip. However, the design of the heat spreader is also dependent on the convection characteristics of the fins within the heat sink, as well the material and geometry of the heat spreader. This paper focuses on the optimization of heat spreaders in a heat sink for safe and efficient performance of electronic circuits. The results of the study show that, for air-cooled electronics, the convective effects may dominate the thermal transport performance of the heat spreader in the heat sink.
基金supported by the Natural Science Foundation of China under Grant Nos.11301369,11401419the Natural Science Foundation of Jiangsu Province under Grant Nos.BK20130260,BK20140279
文摘This paper studies the first passage time problem for a reflected two-sided jump-diffusion risk model with the jumps having a hyper-Erlang distribution.The authors give the explicit closed-form expression for the joint Laplace transform of the first passage time and the overshoot for the reflected process.Finally,the formula is applied to the ruin problem under the barrier dividend strategy and the pricing of the Russian option.
基金supported by the National key scientific instrument and Equipment Development Program of China under Grant No.2012YQ220119Anhui Provincial Natural Science Foundation under Grant No.1308085 MF93+1 种基金the Fundamental Research Foundation for the Central Universities under Grant No.2013HGXJ0223National Natural Science Foundations of China under Grant No.11201108
文摘The changes of numeraire can be used as a very powerful tool in pricing contingent claims in the context of a complete market.By using the method of numeraire changes to evaluate convertible bonds when the value of firm,and those of zero-coupon bonds follow general adapted stochastic processes in this paper,using Ito theorem and Gisanov theorem.A closed-form solution is derived under the stochastic volatility by using fast Fourier transforms.
