期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
基于PLC控制的翻箱喂料自动换批生产设计与应用
1
作者 邓忠声 陈曦 +3 位作者 刘嘉耀 王海峰 宋成照 宫建华 《设备管理与维修》 2024年第7期53-56,共4页
针对制丝车间真空回潮段柔性化生产要求,提出真空回潮喂料机自动换批的PLC控制方法,减少操作人员的劳动强度,提高生产的灵活性。
关键词 真空回潮 翻箱喂料 自动换批
下载PDF
织机快速换批系统综述
2
作者 李书发 《棉纺织技术》 CAS CSCD 北大核心 1995年第1期62-63,共2页
织机快速换批系统综述1前言随着纺织品生产批量愈来愈小,更换产品的周期加快,以期减少停机时间,提高产量的要求则日益受到重视。这就要求织机制造商生产的织机具有高度的灵活性,即织机应尽可能地具有通用性,且具备生产高质量织物... 织机快速换批系统综述1前言随着纺织品生产批量愈来愈小,更换产品的周期加快,以期减少停机时间,提高产量的要求则日益受到重视。这就要求织机制造商生产的织机具有高度的灵活性,即织机应尽可能地具有通用性,且具备生产高质量织物的能力;一旦翻改品种,必须尽快地完... 展开更多
关键词 织机 快速换批系统
下载PDF
整经机筒子架自动换批系统
3
作者 徐帅 杨晓芳 +2 位作者 武银飞 凡启光 孙百胜 《上海纺织科技》 北大核心 2022年第4期57-60,共4页
针对熔融性纱线的整经加工,设计了筒子架自动换批系统。系统的主要功能是利用自动升降的电热切断装置快速批量切断纱线并自动翻转储纱单元。系统设置间隔布排的电热丝,以避免长距离使用电热丝造成过度伸长;使用聚酰亚胺胶带隔离热电偶... 针对熔融性纱线的整经加工,设计了筒子架自动换批系统。系统的主要功能是利用自动升降的电热切断装置快速批量切断纱线并自动翻转储纱单元。系统设置间隔布排的电热丝,以避免长距离使用电热丝造成过度伸长;使用聚酰亚胺胶带隔离热电偶和电热丝,以排除测温时附加电势的干扰;单独传动每个储纱单元并配置脚踏开关,以提高系统灵活性;采用一只霍尔开关配两只磁钢的方法,节省控制器输入口资源;采用顺序控制设计法,以简化编程和提高可靠性。实际使用效果表明,该系统能缩短换批时间,提高生产效率。 展开更多
关键词 整经机 筒子架 纱线切断 换批 机械结构 电控
原文传递
环锭细纱机的技术进步与发展 被引量:4
4
作者 秦贞俊 《纺织器材》 2009年第S1期52-55,共4页
详细介绍了慕尼黑ITMA 2007展出的瑞士立达公司的K45、COM4型、德国绪森公司Elite、丰田公司的RX240系列、青泽公司的Zinser351系列环锭细纱机技术特点,并介绍了其它集聚(紧密)纺纱技术,指出环锭细纱机将向集聚纺纱、长车、细络联及高... 详细介绍了慕尼黑ITMA 2007展出的瑞士立达公司的K45、COM4型、德国绪森公司Elite、丰田公司的RX240系列、青泽公司的Zinser351系列环锭细纱机技术特点,并介绍了其它集聚(紧密)纺纱技术,指出环锭细纱机将向集聚纺纱、长车、细络联及高度自动化方向发展。 展开更多
关键词 集聚纺环锭细纱机 长车 普通环锭细纱机 快速检测 快速换批 负压系统 全自动落纱系统 图形化操作界面
下载PDF
整经机筒子架纱线批量切断装置设计
5
作者 徐鹏 施建花 +3 位作者 杨晓芳 俞祖连 孙百胜 徐帅 《纺织器材》 2021年第6期15-18,共4页
为提高整经机的整经速度、减少换批时间、满足高质高效发展需求,针对直列式筒子架熔融性纱线的整经,设计出筒子架低张力纱线批量切断装置,并增加电热丝专用支承座解决遇热伸长问题;采用可调电压开关电源降低温控难度,并设计对应升降机... 为提高整经机的整经速度、减少换批时间、满足高质高效发展需求,针对直列式筒子架熔融性纱线的整经,设计出筒子架低张力纱线批量切断装置,并增加电热丝专用支承座解决遇热伸长问题;采用可调电压开关电源降低温控难度,并设计对应升降机构和控制电路。实际使用效果表明:整经机筒子架纱线批量切断装置对于熔融性化纤、蚕丝、羊毛及混纺比较高的化纤/棉混纺纱均有较好效果;能够在1 min内完成720只筒子低张力纱线的切断,缩短换批时间,提高生产效率;单套设备花费约为1000元,改造性价比较高;不足在于仅对熔融性纱线使用效果良好,应在纤维素纤维裂解点破坏纱线又不至引起燃烧方面着力研究。 展开更多
关键词 整经机 直列式筒子架 纱线切断 换批 支承座 剪断掐头 镍铬电热丝
下载PDF
制丝线关键工序标准作业时间的研究与应用
6
作者 顾秋林 张永涛 +1 位作者 康晓珍 李智杰 《洛阳师范学院学报》 2016年第8期39-42,共4页
为实时准确地对实际生产的异常状况进行识别和判定,以信息化系统实时采集的制丝线生产过程实时数据为基础,结合生产实际,把工序批次作业时间分为过程生产时间和换批时间两个时间指标,通过采用直方图和控制图进行分析,建立制丝关键工序... 为实时准确地对实际生产的异常状况进行识别和判定,以信息化系统实时采集的制丝线生产过程实时数据为基础,结合生产实际,把工序批次作业时间分为过程生产时间和换批时间两个时间指标,通过采用直方图和控制图进行分析,建立制丝关键工序的作业时间标准和控制模型,对制丝线准时化生产时间进行研究、评价.应用实例表明,该方法能够及时、有效地判定异常,并为寻找产生异常的原因提供参考. 展开更多
关键词 过程生产时间 换批时间 标准作业时间 关键工序 批次
下载PDF
Kinetic modeling of adsorption of vanadium and iron from acid solution through ion exchange resins 被引量:2
7
作者 JoséHelber VINCO Amilton Barbosa BOTELHO JUNIOR +2 位作者 Heitor Augusto DUARTE Denise Crocce Romano ESPINOSA Jorge Alberto Soares TENÓRIO 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2022年第7期2438-2450,共13页
This study assessed the adsorption process and the reaction kinetics involved in the selective recovery of vanadium from an acid solution containing iron as an impurity.Four commercial resins were studied:Lewatit^(... This study assessed the adsorption process and the reaction kinetics involved in the selective recovery of vanadium from an acid solution containing iron as an impurity.Four commercial resins were studied:Lewatit^(®)MonoPlus TP 209 XL,Lewatit^(®) TP 207,Dowex^(TM)M4195(chelating resin)and Lewatit^(®) MonoPlus S 200 H(strong cationic exchange resin).To investigate the effect of time on the adsorption process,batch experiments were carried out using the following initial conditions:pH 2.0,298 K,and a proportion of 1 g of resin to 50 mL of solution.The variation of pH over time was analyzed.Chelating resin released less H+ions as the adsorption occurred,resulting in a lower drop of pH when compared to S 200 H resin.Ion adsorption by the resins was also evaluated through FT-IR and SEM−EDS before and after the experiments.Among the evaluated kinetic models(pseudo-first order,pseudo-second order,Elovich and intraparticle diffusion models),the pseudo-second order model best fits the experimental data of the adsorption of vanadium and iron by all of the four resins.M4195 resin showed the highest recovery of vanadium and the lowest adsorption of iron.Kinetic data,which are fundamental to industrial processes applications,are provided. 展开更多
关键词 vanadium recovery ADSORPTION chelating resins metal ions cation exchange resin batch experiments
下载PDF
Biosorption of basic violet 10 onto activated Gossypium hirsutum seeds:Batch and fixed-bed column studies
8
作者 N.Sivarajasekar R.Baskar 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2015年第10期1610-1619,共10页
Sulphuric acid activated immature Gossypium hirsutum seed(AIGHS) was prepared to biosorbe basic violet 10(BV10) from aqueous solutions.Methylene blue number,iodine number and Brunauer-Emmett-Teller surface analysis in... Sulphuric acid activated immature Gossypium hirsutum seed(AIGHS) was prepared to biosorbe basic violet 10(BV10) from aqueous solutions.Methylene blue number,iodine number and Brunauer-Emmett-Teller surface analysis indicated that the AIGHS were hetero-porous.Boehm titrations and Fourier-transform infrared spectra demonstrated the chemical heterogeneity of the AIGHS surface.Batch biosorption studies were used to examine the effects of process parameters in the following range:pH 2-12,temperature 293-313 K,contact time 1-5 h and initial concentration 200-600 mg·L^(-1).The matching of equilibrium data with the Langmuir-Freundlich form of isotherms indicated that the BV10 was adsorbed via chemisorption and pore diffusion.Kinetic investigation indicated multiple order chemisorption through an Avrami kinetic model.Film diffusion controlled the rate of BV10 biosorption onto AIGHS.The spontaneous and endothermic nature of sorption was corroborated by thermodynamic study.Continuous biosorption experiments were performed using a fixed-bed column and the influence of operating parameters was explored for different ranges of initial concentration 100-300 mg·L^(-1),bed height 5-10 cm,and flow rate 2.5-4.5 ml·min^(-1).A dose response model accurately described the fixed-bed biosorption data.An external mass transfer correlation was formulated explaining BV10-AIGHS sorption. 展开更多
关键词 Gossypium hirsutum seed ISOTHERM Kinetic FIXED-BED Mass transfer
下载PDF
SPECIAL ISSUE: SPACE PRODUCTION AND URBAN ORDER IN CONTEMPORARY CHINA--From Object to Perspective: A Shift of Significance in Space Production and Space Criticism--The Issue of Space in Conceptualizing Contemporary Chinese Urban Construction 被引量:1
9
《Social Sciences in China》 2010年第4期177-188,共12页
Physical space refers to both natural space and social space, that is, social relations. Space production includes production in space and of space. Relations between these two dimensions and between physical space pr... Physical space refers to both natural space and social space, that is, social relations. Space production includes production in space and of space. Relations between these two dimensions and between physical space production and social space production constitute two basic relations in space production. The dialectical connotation of these two basic relations manifests the truth that space production can basically be summed up as reproduction of social relations. Therefore, arguments about space production can be seen as involving a fundamental shift of importance from object to perspective. Seen in this way, there remain some errors in ideas about today's Chinese urban construction, that is, the rupture and separation of object and perspective, resulting in unnecessary risks and costs in the progress of modem Chinese ttrbanization. 展开更多
关键词 OBJECT PERSPECTIVE space production space criticism shift of importance
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部