IMPROVED ALGORITHM FOR CFD/CSD COUPLED SYSTEM DESIGN AND CALCULATION

The data information transfer and time marching strategies between computational fluid dynamics （CFD） and computational structural dynamics （CSD） play crucial roles on the aeroelastic analysis in a time domain. An improved CFD/CSD coupled system is designed, including an interpolation method and an improved loosely coupled algorithm. The interpolation method based on boundary element method （BEM） is developed to transfer aerodynamic loads and structural displacements between CFD and CSD grid systems, it can be universally used in fluid structural interaction solution by keeping energy conservation. The improved loosely coupled algo-rithm is designed, thus it improves the computational accuracy and efficiency. The new interface is performed on the two-dimensional （2-D） extrapolation and the aeroelastie response of AGARD445.6 wing. Results show that the improved interface has a superior accuracy.

Effects of Different Water Stresses on Eco-physiological Characteristics of Hippophae rhamnoides Seedlings

In order to examine the effects of the decrease of future precipitation on the eco-physiological characteristics of sea buckthorn (Hippophae rhamnoides Linn.) in Huangfuchuan Watershed in Nei Mongol, a water gradient experiment was conducted based on the four specially designed water supply levels, including normal precipitation, slight drought, drought and extreme drought. Results of ANOVE showed that different water gradients had a significant effect on (1) microhabitat factors, such as soil water content and soil temperature; (2) gas exchange, such as net photosynthetic rate, stomatal conductance and transpiration rate; (3) resource use efficiency; and (4) leaf water potential. Water use efficiency of H rhamnoides could increase under moderate water stress, i.e. drought condition, while its net photosynthetic rate and transpiration rate decreased. All kinds of eco-physiological characteristics proved H. rhamnoides seedlings under all water supplies were affected by water stress more or less and that mechanism of intrinsic physiological regulation in seedlings under the extreme drought conditions had the appearance of turbulence to a certain extent. Therefore, H rhamnoides seedlings in Huangfuchuan Watershed could not acclimate to extreme drought conditions.

EXPERIMENTAL STUDY OF HTC FOR FILM COOLING OF PARALLEL-INLET HOLES

The parallel-inlet holes with one-row, two-row and three-row film hole arrangements and different di- ameters are proposed to experimentally study their cooling characteristics. Detailed experimental processes and results are described and carried out. Results indicate that heat transfer coefficient （HTC） is increased with the increase of blowing ratio. When the blowing ratio is lower, the distribution of HTC along the heated wall can be divided into three regions. For larger blowing ratio or diameter, the cooling characteristics oi parallel-inlet film holes are similar to those of convective heat transfer around flat. Furthermore, when hole diameter is deter- mined, the arrangement patterns of film hole and the blowing ratio take a great influence on HTC.

夏季如何养鸡

(一)植树遮荫,改善蛋鸡的生活环境。凡稍具规模的饲养场地或农户,通常应适时在鸡舍周围有计划地种植速生阔叶林木,或于饲养场上高搭凉棚,植丝瓜或葡萄等藤蔓类植物攀缘棚上,以绿色植物隔断烈日直射,形成有利于鸡采食、产蛋的小气候。

Flow Regime Identification of Gas-liquid Two-phase Flow Based on HHT

A new method to identify flow regime in two-phase flow was presented, based on signal processing of differential pressure using Hilbert Huang transform （HHT）. Signals obtained from a Venturi meter were decomposed into different intrinsic mode functions （IMFs） with HHT, then the energy fraction of each intrinsic mode and the mean value of residual function were calculated, from which the rules of flow regime identification were summarized. Experiments were carried out on two-phase flow in the horizontal tubes with 50mm and 40mm inner diameter, while water flowrate was in the range of 1.3m^3.h^-1 to 10.5m^3.h^-1, oil flowrate was from 4.2m^3.h^-1 to 7.0m^3.h^-1 and gas flowrate from 0 to 15m^3.h^-1. The results show that the proposed rules have high precision for single phase, bubbly, and slug, plug flow regirne identification, which are independent of not only properties of two-phase fluid. In addition, the method can meet the need of industrial application because of its simple calculation.

Variabilities of Surface Current in the Tropical Pacific Ocean

The Simple Ocean Data Assimilation (SODA) package is used to better understand the variabilities of surface current transport in the Tropical Pacific Ocean from 1950 to 1999. Seasonal variation, interannual and decadal variability analyses are conducted on the three major surface currents of the Tropical Pacific Ocean: the North Equatorial Current (NEC), the North Equatorial Countercurrent (NECC), and the South Equatorial Current (SEC). The transport of SEC is quite larger than those of NEC and NECC. The SEC has two maximums in February and August. The NEC has a small annual variation. The NECC has a maximum in October and is very weak in March and April. All currents have remarkable interannual and decadal variabilities. The variabilities of the NEC and the SEC relate to the winds over them well, but the relationship between the NECC and the wind over it is not close. Analysis related to El Nio-Southern Oscillation (ENSO) suggests that before El Nio (La Nia) the SEC is weaker (stronger) and the NECC is stronger (weaker), after El Nio (La Nia) the SEC is stronger (weaker) and the SEC is weaker (stronger). There is no notable relationship between the NEC and ENSO.

Sediment Movement in Periodic Alternating Current

The present paper summarizes the results of previous studies, including the structure and principle of the rotary ring flume for researching the fine sediment movement, the mechanism of the flume, method of eliminating the influence of the centrifugal force and sediment movement experiments with periodic alternating current. Also included are the experiment-based relationship among sediment concentration, bed shear stress and silt carrying capacity, a proposed erosion-deposition function and bed erosion-deposition calculation together with the results of verification.

Calculation on inner wall temperature in oil-gas pipe flow

Based on the energy equation of gas-liquid flow in pipeline,the explicit temperature drop formula for gas-liquid steady state calculation was derived.This formula took into consideration the Joule-Thomson effect,impact of terrain undulation and heat transfer with the surroundings along the line.Elimination of temperature iteration loop and integration of the explicit temperature equation,instead of enthalpy energy equation,into the conjugated hydraulic and thermal computation have been found to improve the efficiency of algorithm.Then,the inner wall temperature of gas-liquid flow was calculated by using explicit temperature equation and inner wall convective heat transfer coefficient of mixed flow which can be obtained by liquid convective heat transfer coefficient and gas convective heat transfer coefficient on the basis of liquid holdup.The temperature results of gas-liquid flow and inner wall in the case example presented both agree well with those in professional multiphase computational software OLGA.

Multi-scale Analysis of Chaotic Characteristics in a Gas-Solid Fluidized Bed

Deterministic chaos theory offers useful quantitative tools tocharacterize the non-linear dynamic be- havior of a fluidized bed andthe developed complexity theory presents a new approach to evaluatefinite sequences. In this paper, the non-linear, hydrodynamicbehavior of the pressure fluctuation signals in a reactor wasdiscussed By chaos parameters and complexity measures. Coherentresults were achieved by our multi-scale analysis, which Furtherexposed the behavior in a gas-solid two-phase system.

A Typical Mode of Seasonal Circulation Transition: A Climatic View of the Abrupt Transition from Drought to Flood over the Middle and Lower Reaches of the Yangtze River Valley in the Late Spring and Early Summer of 2011

In this study, the seasonal transition of precipitation over the middle and lower reaches of the Yang-tze River Valley (YRV) from late spring to early summer is investigated. The results show that the seasonal transition of precipitation exhibits multi-modes. One of these modes is characterized by an abrupt transition from drought to flood (ATDF) over the middle and lower reaches of the YRV in the seasonal transition of precipitation. It is shown that the ATDF event from May to June 2011 is simply one prominent case of the ATDF mode. The ATDF mode exhibits an obvious decadal variability. The mode has occurred more frequently since 1979, and its amplitude has apparently strengthened since 1994. From the climatic view, the ATDF mode configures a typical seasonal circulation transition from winter to summer, for which the winter circulations are prolonged, and the summer circulations with the rainy season are built up early over the YRV.

DCT ANALYSIS DISTRIBUTION FEATURES OF NEAR-SURFACE WIND FIELDS DURING THE LANDFALL OF VONGFONG

Based on the QuikSCAT data, the features of surface wind distribution of the typhoon Vongfong landfall process are analyzed. We have also studied the variance spectral configuration of the surface wind field using DCT (Discrete Cosine Transform). The conclusions are as follows: The near-surface wind field is highly asymmetric; the variance components of asymmetric surface wind field depend mainly on the airflow direction of wavenumber 1 and 2. When the typhoon moves west, there are two wave spectral centers lining up in the zonal direction, mainly the airflow from zonal wavenumber 2 and meridional wavenumber 2; when it moves north, there are two wave spectral centers in a meridional array, mainly the airflow from zonal wavenumber 1 and meridional wavenumber 2. The airflow for wavenumber 1 mainly contributes to the variance of the tangential wind while that for wavenumber 2 to the variance of the radial wind. The asymmetrical distribution changes with the large-scale environment and self-rotating circulation around the typhoon. When it approached land, the associated gale appears in front portion in the advancing direction of the storm. It is in effect similar to the model of Chen Lian-shou for typhoon-related gales NNW on the left front portion and SE on the right front portion.

Strategy for Airflow Control of Cathode in Proton Exchange Membrane Fuel Cell

There are two important objectives for airflow control in proton exchange membrane fuel cells （PEMFCs）. One is to keep the desired excess ratio（to provide sufficient reactant airflow） to ensure fast transient response arid to minimize auxiliary power consumption, and the other one is to control the cathode pressure in stack within an acceptable range. In reality, the big inertia of stack＇s airflow-supplying activator limits the bandwidth of air-flow supply loop, which makes the first objective difficult to achieve, and another difficulty is that airflow is coupled with the cathode pressure in stack, which make it uneasy to keep the pressure unchanged in case of airflow perturbation. In order to overcome these difficulties, three dependant controllers are presented in this paper to control airflow, deeouple the cathode pressure in stack from airflow and stabilize the cat bode pressure in stack respectively. The effectiveness of these controllers is proven by subsequent simulation and test results.

AIR VELOCITY SENSOR

During the last twenty years there has been rapid progress in the use of automation in a wide range of industries,as well as in military, scientific application. However, the progress in the application of automatic control is often hindered by the lack of accurate, reliable measuring apparatus. An economic thermal couple air flow sensor with better linearity (accuracy is ±5% of full scale) has been successfully made at Trolex Ltd. Many other existing sensors fail in the application of industries because of non-linearity.

ANALYSIS OF EXTRATROPICAL TRANSITION OF TROPICAL CYCLONE OVER China's Mainland

Typhoon Winnie (1997) experienced three stages after landfall on China: weakening, transition, and re-intensification. The transition is similar to the "complex transition" model proposed by Matano and Sekioka. During the re-intensification stage, the transformed cyclone developed into a pattern of Shapiro-Keyser Cyclone model. From the diagnosis we can find that the cause of Winnie’s transition is the intrusion of cold air from the mid- and upper- troposphere and the warm temperature advection in the lower. Winnie redeveloped after transition, which is the result of three vital factors: the warm temperature advection in the lower troposphere, the divergence on the right side of the upper jet entry and the cyclonic vorticity advection in the upper.

Wavelet Characterization of the Flow Regime in a Gas-Solid Fluidized Bed

Processes like combustion, pyrolysis or gasification of coal and biomass are typical applications of gas-solid fluidized beds. These reactors normally use silica sand as the inert material inside the bed and the sand particles represent around 95% of the total bed weight. Pressure measurements have been used to characterize the dynamic behavior of fluidized beds since early researches in the area. Pressure fluctuations are generally due to bubbles flow which characterizes the fluidization regime. The present work aims to perform a time-frequency analysis of the pressure signal acquired in an experimental apparatus on different gas-solid flow regimes. Continuous and discrete wavelet transforms were applied and the results were compared with image records acquired simultaneously with the pressure signal. The main frequencies observed are in accordance with the ones obtained through Fourier spectra. The time-frequency distribution of the signal agrees with the phenomena observed in the image record, remarkably for the slugging flow. Some additional research is still necessary to completely characterize the flow regimes using the wavelet scalograms but the present results show that the task is a very promising one.

Numerical Analysis on Ventilating and Air Conditioning Scheme of Shenyang Subway Station

Different cities have different climate conditions and outdoor temperature and humidity, so the scheme of an environment control in subway should be analyzed by considering objective conditions, project cost and operating status. In this paper, a physical and mathematical model is built according to the design of Shenyang subway (line 1), the boundary conditions of the model are defined by the design and experiments, the numerical analysis of ventilating scheme and air conditioning scheme is introduced individually, and the temperature field and air flow field of the two schemes are compared, so that the feasibility of using a ventilating scheme in subway of northeast cities is discussed. Considering comfort and economy, it can be concluded that mechanical ventilation is feasible in subway of northeast cities because the air temperature there is not very high in summer.

Experimental study on convection heat transfer and air drag in sinter layer

Convection heat transfer coefficient and air pressure drop in sinter layer are important factors for the design of sinter cooling craft. Due to the lack of necessary data, the two parameters are studied by experimental method. The experimental results show that heat conduction of sinter impacts the measurement of convection heat transfer coefficient. Convection heat transfer increases with the increase of air volumetric flow rate. Sinter layer without small particles(sample I) gives higher convection heat transfer coefficient than that with small particles(sample II). Under the considered conditions, volumetric convection heat transfer coefficient is in the range of 400-1800 W/(m3·°C). Air pressure drop in sinter layer increases with the increase of normal superficial velocity, as well as with the rise of air temperature. Additionally, air pressure drop also depends on sinter particle size distribution. In considered experimental conditions, pressure drop in sinter sample II is 2-3 times that in sinter sample I, which resulted from 17% small scale particles in sinter sample II.

ARX-NNPLS Model Based Optimization Strategy and Its Application in Polymer Grade Transition Process

Since it is often difficult to build differential algebraic equations (DAEs) for chemical processes, a new data-based modeling approach is proposed using ARX (AutoRegressive with eXogenous inputs) combined with neural network under partial least squares framework (ARX-NNPLS), in which less specific knowledge of the process is required but the input and output data. To represent the dynamic and nonlinear behavior of the process, the ARX combined with neural network is used in the partial least squares (PLS) inner model between input and output latent variables. In the proposed dynamic optimization strategy based on the ARX-NNPLS model, neither parameterization nor iterative solving process for DAEs is needed as the ARX-NNPLS model gives a proper representation for the dynamic behavior of the process, and the computing time is greatly reduced compared to conventional control vector parameterization method. To demonstrate the ARX-NNPLS model based optimization strategy, the polyethylene grade transition in gas phase fluidized-bed reactor is taken into account. The optimization results show that the final optimal trajectory of quality index determined by the new approach moves faster to the target values and the computing time is much less.

Temperature distribution of the incompletely mixed fluid flowing in the tubes and the unmixed fluid crossing over the tubes

A new model is established to describe heat exchanging of the incompletely mixed fluid flowing in the tubes and the unmixed fluid crossing out of the tubes in the heat-exchangers especially in air cooler. In the model, a new method of analyzing volume is proposed to develop the temperature distribution equations of the two fluids --tw（x） and ta（X,,7＂）. With tw（x） and ta （x, ,7）, the curves of the temperature distribution of the two fluids can be obtained. Also tw（x） and ta（x,n） can be used to calculate parameters of structure of an air cooler and to improve performances of it.

Three Dimensional Numerical Simulation of Convection-Condensation of Vapor with High Concentration Air in Tube with Inserts

A three-dimensional numerical model is presented for studying the convection-condensation of mixture with vapor in a tube with edgefold-twisted-tape inserts under transition flow.According to the diffusion layer theory and laminar species transport,a condensation model with user defined function is proposed and compared with heat and mass transfer analogy and experimental test.With the condensation model,the influences of gap width and op-erating parameters on thermal-hydrodynamics performance are simulated.As the gap width increases,convection and condensation heat transfer increase initially and then decrease,while convection heat transfer increases sharply and then decreases slightly.Increasing vapor fraction has a significant effect on condensation heat transfer but it has little effect on convective heat transfer.With the increase of inner wall temperature both convection and condensa-tion heat transfer all decrease and the ratio of condensation to total heat decrease dramatically.Increases inlet tem-perature mainly affects convection heat transfer.