期刊文献+
共找到12篇文章
< 1 >
每页显示 20 50 100
PDH装置进出料换热器入口流场分布特性研究
1
作者 李俊松 李念 《化肥设计》 CAS 2021年第6期25-28,共4页
为了探讨换热器分布板的分布性能,采用CFD数值模拟方法,对两种不同孔径的换热器分布板进行模拟研究。改变换热器进口处的流体流速,将分布板处压力场、速度场的均匀性作为衡量指标,分析两种不同孔径分布板上压力场和速度场的分布。结果表... 为了探讨换热器分布板的分布性能,采用CFD数值模拟方法,对两种不同孔径的换热器分布板进行模拟研究。改变换热器进口处的流体流速,将分布板处压力场、速度场的均匀性作为衡量指标,分析两种不同孔径分布板上压力场和速度场的分布。结果表明,装置内部压力分布与流速分布的等值线均呈马鞍形,中部数值较大,边缘数值较小。在相同的入口流速下,孔径为16 mm分布板上的压力分布情况比25 mm分布板更差;速度分布情况优于25 mm分布板;增加进口流速,压力分布情况和速度分布情况会得到改善。 展开更多
关键词 换热分布 数值模拟 压力场分布 速度场分布
下载PDF
基于Matlab的热网换热站最短分布问题研究
2
作者 常世杰 袁铭润 《山西建筑》 2021年第16期104-105,139,共3页
基于我国的可持续发展战略,结合产业结构优化和能源结构型调整对供热公司提出的新要求,如何实现冬季清洁供热成为我国长期聚焦的难题。在热网管网中输送过程中热量与传输距离是一对矛盾,为实现低碳清洁、安全高效地将党和政府的温暖送... 基于我国的可持续发展战略,结合产业结构优化和能源结构型调整对供热公司提出的新要求,如何实现冬季清洁供热成为我国长期聚焦的难题。在热网管网中输送过程中热量与传输距离是一对矛盾,为实现低碳清洁、安全高效地将党和政府的温暖送到千家万户,就要在热网初建中注重热网建设距离问题。通过应用Matlab计算机辅助设计热网最短分布问题,降低热网建设中材料设备的消耗,同时减少建设人员工作负担,将热量在传输过程中的散失降至最少,以促进我国供热工程高效发展。 展开更多
关键词 热网换热分布 迪杰斯特拉算法 MATLAB设计
下载PDF
截面形状对旋转扰流柱通道流动换热特性的影响
3
作者 房兴龙 方堪羡 +1 位作者 王澜 李和群 《节能技术》 CAS 2022年第3期272-278,共7页
为合理设计航空发动机涡轮动叶尾缘冷却结构,采用ANSYS FLUENT软件模拟了四种扰流柱截面形状在旋转状态下的流动换热特性。对比分析了不同旋转数(Ro)和不同扰流柱截面形状时通道内部的三维流场分布、湍流动能分布、努塞尔数(Nu)分布以... 为合理设计航空发动机涡轮动叶尾缘冷却结构,采用ANSYS FLUENT软件模拟了四种扰流柱截面形状在旋转状态下的流动换热特性。对比分析了不同旋转数(Ro)和不同扰流柱截面形状时通道内部的三维流场分布、湍流动能分布、努塞尔数(Nu)分布以及阻力系数。其中扰流柱的截面形状包含圆形、菱形、矩形和椭圆形,Ro数包含0、0.2、0.4和0.6四种数值。模拟过程中通道入口雷诺数为7000,壁面恒定热流为1000 W/m^(2)。结果表明,截面形状和旋转数对流动和换热状态有着显著影响,矩形扰流柱通道的换热系数和阻力系数最高;随着旋转数的增加,迎风面和背风面的换热系数差异逐渐增大;在旋转作用下,扰流柱尾缘区域出现了纵向二次流,该二次流显著破坏了壁面附近的边界层,有利于背风面换热增强。 展开更多
关键词 涡轮尾缘 扰流柱 旋转作用 截面形状 流动特性 换热分布
下载PDF
板换换热与压降关联式遗传算法参数辨识
4
作者 赵海波 杨昭 吴坤 《制冷与空调》 2006年第5期14-19,共6页
针对板换的换热及压降关联式适用范围窄的缺点,在分析板换传热和压力损失原理的基础上,建立板式换热器分布参数模型,借鉴已有的换热和压降关联式,并以关联式中的系数为优化辨识变量,以换热器特性参数模拟值与试验值相对偏差为优化目标函... 针对板换的换热及压降关联式适用范围窄的缺点,在分析板换传热和压力损失原理的基础上,建立板式换热器分布参数模型,借鉴已有的换热和压降关联式,并以关联式中的系数为优化辨识变量,以换热器特性参数模拟值与试验值相对偏差为优化目标函数,采用遗传算法进行优化计算,获得待辨识参数的值,得到新的换热和压降关联式,通过与已有的较高精度关联式和试验数据的比较,证明所获得的关联式具有较高的精度,通过遗传算法参数辨识获得板换换热及压降关联式是一种行之有效的关联式获取方法。 展开更多
关键词 板式换热分布参数 遗传算法 参数辨识 优化
下载PDF
EXPERIMENTAL STUDY OF HTC FOR FILM COOLING OF PARALLEL-INLET HOLES 被引量:2
5
作者 杨卫华 张靖周 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 2012年第1期46-53,共8页
The parallel-inlet holes with one-row, two-row and three-row film hole arrangements and different di- ameters are proposed to experimentally study their cooling characteristics. Detailed experimental processes and res... The parallel-inlet holes with one-row, two-row and three-row film hole arrangements and different di- ameters are proposed to experimentally study their cooling characteristics. Detailed experimental processes and results are described and carried out. Results indicate that heat transfer coefficient (HTC) is increased with the increase of blowing ratio. When the blowing ratio is lower, the distribution of HTC along the heated wall can be divided into three regions. For larger blowing ratio or diameter, the cooling characteristics oi parallel-inlet film holes are similar to those of convective heat transfer around flat. Furthermore, when hole diameter is deter- mined, the arrangement patterns of film hole and the blowing ratio take a great influence on HTC. 展开更多
关键词 film eooling parallel-inlet hole multiple-row arrangement heat transfer eoeffieient (HTC)
下载PDF
Global Sea Level Change and Thermal Contribution 被引量:9
6
作者 ZUO Juncheng ZHANG Jianli +2 位作者 DU Ling LI Peiliang LI Lei 《Journal of Ocean University of China》 SCIE CAS 2009年第1期1-8,共8页
The global long-term sea level trend is obtained from the analysis of tide gauge data and TOPEX/Poseidon data. The linear trend of global mean sea level is highly non-uniform spatially, with an average rate of 2.2 mmy... The global long-term sea level trend is obtained from the analysis of tide gauge data and TOPEX/Poseidon data. The linear trend of global mean sea level is highly non-uniform spatially, with an average rate of 2.2 mmyear^-1 in T/P sea-level rise from October 1992 to September 2002. Sea level change due to temperature variation (the thermosteric sea level) is discussed. The results are compared with TOPEX/Poseidon altimeter data in the same temporal span at different spatial scales. It is indicated that the thermal effect accounts for 86% and 73% of the observed seasonal variability in the northern and southern hemispheres, respectively. The TOPEX/Poseidon observed sea level lags behind the TSL by 2 months in the zonal band of 40%-60% in both the northern and southern hemispheres. Systematic differences of about 1-2 cm between TOPEX/Poseidon observations and thermosteric sea level data are obtained. The potential causes tbr these differences include water exchange among the atmosphere, land, and oceans, and some possible deviations in thermosteric contribution estimates and geophysical corrections to the TOPEX/Poseidon data. 展开更多
关键词 global sea level seasonal variation secular change thermosteric sea-level
下载PDF
Theoretical and Experimental Study on Ground Coupled Heat Pump with Vertical Spiral Coil 被引量:4
7
作者 李新国 周倩 +2 位作者 赵军 朱强 胡璟 《Transactions of Tianjin University》 EI CAS 2003年第2期123-126,共4页
The numeric al simulation study on the temperature distribution of underground field for the ground coupled heat pump (GCHP) with vertical spira l coil was carried out by using finite element. The distribution and rec... The numeric al simulation study on the temperature distribution of underground field for the ground coupled heat pump (GCHP) with vertical spira l coil was carried out by using finite element. The distribution and recovery of undergroun d field temperature under different operation ratio and the optimal operation ratio were simulated.The performance parameters, i.e. inlet and outlet temperature of the ground spiral coil in heating and cooling modes were tested, the heat extracted or emitted by the heat pump to the ground was calculated, and the coefficients of performance (COP) of GCHP at heat ing and cooling modes were analyzed. 展开更多
关键词 ground coupled heat pump (GCHP) vert ic al spiral coil underground temperature distribution optimal operation ratio
下载PDF
印度国家宇航实验室对冷却燃气涡轮叶片的研究 被引量:1
8
作者 B.R.PAI V.KRISHNAMOORTHY 《燃气涡轮试验与研究》 2000年第2期5-14,17,共11页
回顾了印度国家宇航实验室1982年以来对燃气涡轮发动机冷却涡轮叶片领域所进行的研究工作。着重介绍了在不同的自由流紊流度、压力梯度、燃烧室出口流场等条件下涡轮叶片表面换热系数分布的分析和实验研究,以及叶片内冷却通道中平... 回顾了印度国家宇航实验室1982年以来对燃气涡轮发动机冷却涡轮叶片领域所进行的研究工作。着重介绍了在不同的自由流紊流度、压力梯度、燃烧室出口流场等条件下涡轮叶片表面换热系数分布的分析和实验研究,以及叶片内冷却通道中平均流动和换热系数分布方面所作的研究。还介绍了涡轮叶片的新颖冷却方法和真实冷却叶片三维温度场有限元分析程序。 展开更多
关键词 燃气涡轮发动机 涡轮叶片 冷却 研究 印度国家宇航实验室 表面换热系数分布
全文增补中
Thermal Stability of Silica-Zirconia Membranes 被引量:2
9
作者 刘伟 张宝泉 +1 位作者 刘秀凤 徐黎明 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2006年第1期31-36,共6页
The thermal stability, phase transformation, surface morphology, pore size distribution and permeation of the defect-free silica-zirconia membrane were investigated by using X-ray diffraction (XRD), atomic force mic... The thermal stability, phase transformation, surface morphology, pore size distribution and permeation of the defect-free silica-zirconia membrane were investigated by using X-ray diffraction (XRD), atomic force microscopy (AFM), gas adsorption analyzer (BET), and gas permeation apparatus, respectively. Using silica as the stabilizing agent, the defect-free membrane was much more stable than pure zirconia. The crystal transformation of zirconia in the silica-stabilized membrane could be prohibited by the interaction between silica and zireonia. ZrO2 crystals were kept tetragonal below 900℃, the size of which did not change with temperature between 700℃ and 900℃. It was further verified by the AFM observation, pore size analysis and permeation study. This thermal stability makes the silica-zirconia membrane a good choice as the intermediate layer for zeolite and Pd-based membranes. 展开更多
关键词 silica-zirconia membrane thermal stability PERMEATION
下载PDF
基于红外热成像技术的透平叶栅端壁换热瞬态测量方法 被引量:2
10
作者 刘洋 陈榴 +1 位作者 张发生 戴韧 《热能动力工程》 CAS CSCD 北大核心 2020年第4期83-91,共9页
详细介绍了透平叶栅端壁换热瞬态测量实验台及实验测量系统的组成和应用。基于红外热成像技术,经过一系列校准步骤,获得准确的端壁温度。使用半无限大平板瞬态导热理论并结合叠加原理,求解端壁换热系数。编写端壁区域组合、边界识别和... 详细介绍了透平叶栅端壁换热瞬态测量实验台及实验测量系统的组成和应用。基于红外热成像技术,经过一系列校准步骤,获得准确的端壁温度。使用半无限大平板瞬态导热理论并结合叠加原理,求解端壁换热系数。编写端壁区域组合、边界识别和剔除等算法程序获得完整端壁换热分布。实验结果表明:该测量方法能够获得可靠的透平端壁换热分布结果;对结果分析发现,在靠近端壁吸力面侧,存在明显的"狭长"换热低区,且端壁压力面侧换热程度剧烈,透平叶栅端壁后部承受着较大热负荷。 展开更多
关键词 红外热成像 透平叶栅端壁 瞬态实验 换热系数 换热分布
原文传递
A Numerical Model of a U-Tube Vertical Ground Heat Exchanger Used as an Evaporator
11
作者 Benoit Beauchamp Louis Lamarche Stanislaw Kajl 《Journal of Energy and Power Engineering》 2013年第2期237-249,共13页
The paper presents a general distributed model of a vertical U-tube direct expansion heat exchanger coupled with the ground. This model is developed for studying the dynamic thermal behavior of a buried heat exchanger... The paper presents a general distributed model of a vertical U-tube direct expansion heat exchanger coupled with the ground. This model is developed for studying the dynamic thermal behavior of a buried heat exchanger which is an integral part of a so-called direct expansion heat pump. The transient conservative equations of mass, momentum and energy considering single and two-phase flow of refrigerant are derived and presented. The diffusive heat exchange with the ground is treated using an analytical approach to treat short-time scale response of vertical boreholes based on an imposed temperature. The thermal interference between the two pipes of the heat exchanger is also considered. The mathematical equations of the model are numerically presented using a control volume formulation and the solution of the system of equations is obtained by successive iterations. The dynamic behavior of the evaporator is simulated and the numerical results are analyzed regarding spatial parameters distribution and thermal interference influence. 展开更多
关键词 Direct expansion REFRIGERANT GROUND EVAPORATOR heat pump.
下载PDF
Velocity Profiles between Two Baffles in a Shell and Tube Heat Exchanger 被引量:2
12
作者 Tae-Hyun Chang Chang-Hoan Lee +1 位作者 Hae-Soo Lee Kwon-Soo Lee 《Journal of Thermal Science》 SCIE EI CAS CSCD 2015年第4期356-363,共8页
Heat exchangers are extensively utilized for waste heat recovery,oil refining,chemical processing,and steam generation.In this study,velocity profiles are measured using a 3D particle image velocimetry(PIV)system betw... Heat exchangers are extensively utilized for waste heat recovery,oil refining,chemical processing,and steam generation.In this study,velocity profiles are measured using a 3D particle image velocimetry(PIV)system between two baffles in a shell and tube heat exchanger for parallel and counter flows.The PIV and computational fluid dynamics results show the occurrence of some strong vectors near the bottom.These vectors are assumed due to the clearance between the inner tubes and the front baffle.Therefore,the major parts of the vectors are moved out through the bottom opening of the rear baffle,and other vectors produce a large circle between the two baffles.Numerical simulations are conducted to investigate the effects of the baffle on the heat exchanger using the Fluent software.The k-εturbulence model is employed to calculate the flows along the heat exchanger. 展开更多
关键词 BAFFLE P1V Shell and tube heat exchanger Cut off ratio CFD
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部