The electrostatic potential energy model of hydrotalcites was based on the theory of crystallography. The anionic potential energy of MgAl-hydrotalcites, with 20 layers and 2107 anions per layer, was calculated, and t...The electrostatic potential energy model of hydrotalcites was based on the theory of crystallography. The anionic potential energy of MgAl-hydrotalcites, with 20 layers and 2107 anions per layer, was calculated, and the anionic stability of the hydrotalcites was investigated. The charge density of the layer and the distance between the adjacent anions varied with the molar ratio of Al^3＋/（Mg^2＋ ＋ Al^3＋）. Anionic potential energy depended on the charge and size of the anions. Calculation results remained consistent with thermal stability and the ion exchange ability reported. This model is able to predict anionic stability of the hydrotalcites.展开更多
The thermal stability, phase transformation, surface morphology, pore size distribution and permeation of the defect-free silica-zirconia membrane were investigated by using X-ray diffraction （XRD）, atomic force mic...The thermal stability, phase transformation, surface morphology, pore size distribution and permeation of the defect-free silica-zirconia membrane were investigated by using X-ray diffraction （XRD）, atomic force microscopy （AFM）, gas adsorption analyzer （BET）, and gas permeation apparatus, respectively. Using silica as the stabilizing agent, the defect-free membrane was much more stable than pure zirconia. The crystal transformation of zirconia in the silica-stabilized membrane could be prohibited by the interaction between silica and zireonia. ZrO2 crystals were kept tetragonal below 900℃, the size of which did not change with temperature between 700℃ and 900℃. It was further verified by the AFM observation, pore size analysis and permeation study. This thermal stability makes the silica-zirconia membrane a good choice as the intermediate layer for zeolite and Pd-based membranes.展开更多
The present work establishes a systematic approach based on the application of in-situ Fourier transform infrared spectroscopy （FTIR） for the investigation of the crystal structure, thermal stability, redox behavior...The present work establishes a systematic approach based on the application of in-situ Fourier transform infrared spectroscopy （FTIR） for the investigation of the crystal structure, thermal stability, redox behavior （temperature-programmed reduction/temperatureprogrammed re-oxidation） as well as the catalytic properties of Co3O4 thin films. The syntheses of Co3O4 were achieved by chemical vapor deposition in the temperature range of 400-500℃. The structure analysis of the as-prepared material revealed the presence of two prominent IR bands peaking at 544 cm-1 （υ1） and 650 cm-1 （υ2） respectively, which originate from the stretching vibrations of the Co-O bond, characteristic of the Co3O4 spinel. The lattice stability limit of Co3O4 was estimated to be above 650℃. The redox properties of the spinel structure were determined by integrating the area under the emission bands υ1 and υ2 as a function of the temperature. Moreover, Co3O4 has been successfully tested as a catalyst towards complete oxidation of dimethyl ether below 340 ℃. The exhaust gas analysis during the catalytic process by in situ absorption FTIR revealed that only CO2 and H2O were detected as the final products in the catalytic reaction. The redox behavior suggests that the oxidation of dimethyl ether over Co3O4 follows a Mars-van Krevelen type mechanism. The comprehensive application of in situ FTIR provides a novel diagnostic tool in characterization and performance test of catalysts.展开更多
In mine geothermal prediction, the unsteady heat transfer coefficient is an important parameter for heat transfer computation between country rock and mine airflow. In this paper, the rock temperature distributions in...In mine geothermal prediction, the unsteady heat transfer coefficient is an important parameter for heat transfer computation between country rock and mine airflow. In this paper, the rock temperature distributions in the geothermal fields have been derived in mathematics, the unsteady heat transfer coefficients that can expound the relation between its nature and influencing factors have been derived also based on this analytic formula. It is shown both by numerical simulations and through in situ measurernents that the new computation method for determining the unsteady heat transfer cofeeicient is accurate, rapid and simple.展开更多
The thermal stability of five commercial ion-exchange resin catalysts was studied by means of thermal gravimetric analysis （TGA） at elevated temperatures of up to 600℃ and isothermal temperatures in the range of 15...The thermal stability of five commercial ion-exchange resin catalysts was studied by means of thermal gravimetric analysis （TGA） at elevated temperatures of up to 600℃ and isothermal temperatures in the range of 150℃ and 200 ℃. Resin samples with different initial water contents were also investigated. The study indicated that TGA, as a complementary evaluating method for the plug flow reactor system approach, could be used as a fast analyzing means for study on the thermal stability of ion-exchange resin catalysts. The stoichiometric calculation of the isothermally treated resin catalysts based on the FTIR analysis and acid capacity confirmed that the weight loss of the resins at 150℃ and 200℃ was caused by the desulfonation process and that desulfonation occurred mainly at the para-position of the benzene ring in the resins. H＋ ions and moisture played an important role in the desulfonation process.展开更多
Currently, many organic materials are being considered as electrode materials and display good electrochemical behavior. However, the most critical issues related to the wide use of organic electrodes are their low th...Currently, many organic materials are being considered as electrode materials and display good electrochemical behavior. However, the most critical issues related to the wide use of organic electrodes are their low thermal stability and poor cycling performance due to their high solubility in electrolytes. Focusing on one of the most conventional carboxylate organic materials, namely lithium terephthalate Li2CsH4O4, we tackle these typical disadvantages via modifying its molecular structure by cation substitution. CaCsH4O4 and A12（C8H4O4）3 are prepared via a facile cation exchange reaction. Of these, CaCsH4O4 presents the best cycling performance with thermal stability up to 570℃ and capacity of 399 mA.h.g-1, without any capacity decay in the voltage window of 0.005-3.0 V. The molecular, crystal structure, and morphology of CaCsH4O4 are retained during cycling. This cation-substitution strategy brings new perspectives in the synthesis of new materials as well as broadening the applications of organic materials in Li/Na-ion batteries.展开更多
文摘The electrostatic potential energy model of hydrotalcites was based on the theory of crystallography. The anionic potential energy of MgAl-hydrotalcites, with 20 layers and 2107 anions per layer, was calculated, and the anionic stability of the hydrotalcites was investigated. The charge density of the layer and the distance between the adjacent anions varied with the molar ratio of Al^3＋/（Mg^2＋ ＋ Al^3＋）. Anionic potential energy depended on the charge and size of the anions. Calculation results remained consistent with thermal stability and the ion exchange ability reported. This model is able to predict anionic stability of the hydrotalcites.
基金Supported by the National Natural Science Foundation of China (No.20476076).
文摘The thermal stability, phase transformation, surface morphology, pore size distribution and permeation of the defect-free silica-zirconia membrane were investigated by using X-ray diffraction （XRD）, atomic force microscopy （AFM）, gas adsorption analyzer （BET）, and gas permeation apparatus, respectively. Using silica as the stabilizing agent, the defect-free membrane was much more stable than pure zirconia. The crystal transformation of zirconia in the silica-stabilized membrane could be prohibited by the interaction between silica and zireonia. ZrO2 crystals were kept tetragonal below 900℃, the size of which did not change with temperature between 700℃ and 900℃. It was further verified by the AFM observation, pore size analysis and permeation study. This thermal stability makes the silica-zirconia membrane a good choice as the intermediate layer for zeolite and Pd-based membranes.
文摘The present work establishes a systematic approach based on the application of in-situ Fourier transform infrared spectroscopy （FTIR） for the investigation of the crystal structure, thermal stability, redox behavior （temperature-programmed reduction/temperatureprogrammed re-oxidation） as well as the catalytic properties of Co3O4 thin films. The syntheses of Co3O4 were achieved by chemical vapor deposition in the temperature range of 400-500℃. The structure analysis of the as-prepared material revealed the presence of two prominent IR bands peaking at 544 cm-1 （υ1） and 650 cm-1 （υ2） respectively, which originate from the stretching vibrations of the Co-O bond, characteristic of the Co3O4 spinel. The lattice stability limit of Co3O4 was estimated to be above 650℃. The redox properties of the spinel structure were determined by integrating the area under the emission bands υ1 and υ2 as a function of the temperature. Moreover, Co3O4 has been successfully tested as a catalyst towards complete oxidation of dimethyl ether below 340 ℃. The exhaust gas analysis during the catalytic process by in situ absorption FTIR revealed that only CO2 and H2O were detected as the final products in the catalytic reaction. The redox behavior suggests that the oxidation of dimethyl ether over Co3O4 follows a Mars-van Krevelen type mechanism. The comprehensive application of in situ FTIR provides a novel diagnostic tool in characterization and performance test of catalysts.
文摘In mine geothermal prediction, the unsteady heat transfer coefficient is an important parameter for heat transfer computation between country rock and mine airflow. In this paper, the rock temperature distributions in the geothermal fields have been derived in mathematics, the unsteady heat transfer coefficients that can expound the relation between its nature and influencing factors have been derived also based on this analytic formula. It is shown both by numerical simulations and through in situ measurernents that the new computation method for determining the unsteady heat transfer cofeeicient is accurate, rapid and simple.
基金supported financially by the Purolite Company and Chinese National Natural Science Foundation(20674069)
文摘The thermal stability of five commercial ion-exchange resin catalysts was studied by means of thermal gravimetric analysis （TGA） at elevated temperatures of up to 600℃ and isothermal temperatures in the range of 150℃ and 200 ℃. Resin samples with different initial water contents were also investigated. The study indicated that TGA, as a complementary evaluating method for the plug flow reactor system approach, could be used as a fast analyzing means for study on the thermal stability of ion-exchange resin catalysts. The stoichiometric calculation of the isothermally treated resin catalysts based on the FTIR analysis and acid capacity confirmed that the weight loss of the resins at 150℃ and 200℃ was caused by the desulfonation process and that desulfonation occurred mainly at the para-position of the benzene ring in the resins. H＋ ions and moisture played an important role in the desulfonation process.
文摘Currently, many organic materials are being considered as electrode materials and display good electrochemical behavior. However, the most critical issues related to the wide use of organic electrodes are their low thermal stability and poor cycling performance due to their high solubility in electrolytes. Focusing on one of the most conventional carboxylate organic materials, namely lithium terephthalate Li2CsH4O4, we tackle these typical disadvantages via modifying its molecular structure by cation substitution. CaCsH4O4 and A12（C8H4O4）3 are prepared via a facile cation exchange reaction. Of these, CaCsH4O4 presents the best cycling performance with thermal stability up to 570℃ and capacity of 399 mA.h.g-1, without any capacity decay in the voltage window of 0.005-3.0 V. The molecular, crystal structure, and morphology of CaCsH4O4 are retained during cycling. This cation-substitution strategy brings new perspectives in the synthesis of new materials as well as broadening the applications of organic materials in Li/Na-ion batteries.
