“抽条换线法”在电力线路施工中的应用

在现有架空输电线上更换导线时,使用本文介绍的"抽条换线法",可以把过去在地面上进行操作的收线和紧线作业改在杆塔上进行。这一新的作业方法除具有省时、省物的优点外,还可大大减少对环境的影响。

6502电气集中假八字进路选路方法的设计

本文主要分析解决因换线造成假八字进路与其它正常八字进路之间的相互干扰，采用带条件的换线法，在设计中只要有一处换线即可满足电气集中的基本技术要求。

Static characteristics of a novel flux-switching permanent magnet linear motor

A novel flux-switching permanent magnet linear motor（FSPMLM） is proposed for linear direct driving machine tools.First,the two-and three-dimensional topological configuration of the proposed motor is presented;the basic operational principle of the FSPMLM is introduced;and the magnetic fields at the two typical conditions of no-load are analyzed.Secondly,the FSPMLM is analyzed by the two-dimensional finite element method（FEM） to investigate the static electromagnetic characteristics such as flux-linkage,back EMF（electromotive force） and inductance performances.The cogging forces of two kinds of FSPMLMs with different shaped cores are analyzed and compared,and the results show that the cogging force is significantly reduced by using the E-shaped cores.Additionally,based on the co-energy method,the thrust equation is derived and verified by the simulation results obtained by the FEM.Finally,an experimental prototype is used to test the characteristics under open circuit and load conditions.The simulation and experimental results indicate that the proposed motor has advantages of a sinusoidal back-EMF waveform,a small cogging effect and a high thrust density,and it is suitable for the application of linear direct driving machine tools.

Resonance and Antiresonance in Electronic Transport Process Through a T-Shaped Quantum Waveguide

By means of the transfer matrix approach, the linear conductance spectrum for electronic transport through a T-shaped quantum waveguide is calculated. The resonant peaks and the antiresonant dips in the conductance spectrum are mainly focused. The previous prediction about their positions by other theoretical approaches is checked. In addition, a function of spin filtering is suggested based on the interplay of the resonance and antiresonance in this T-shaped quantum waveguide.

A Novel Vertical Handoff Algorithm with Dynamic Weights in Wireless Heterogeneous Networks

In order to enhance the quality of vertical handoff in an overlay wireless network, multiple attributes are taken into account when optimizing the vertical handoff decision including user-based and network-based QoS factors. In this paper, we develop a novel vertical handoff algorithm in an integrated 3G cellular and Wireless LAN networks. The proposed algorithm can adjust the weight of each QoS attribute dynamically as the networks change, trace the network condition and choose the optimal access point at transient regions. Simulation results show that this algorithm is able to provide accurate handoff decision, resulting in small unnecessary handoff numbers, good performance of throughput and handoff delay in heterogeneous environments.

New Exact Solutions for a Class of Nonlinear Coupled Differential Equations

More new exact solutions for a class of nonlinear coupled differential equations are obtained by using a direct and efficient hyperbola function transform method based on the idea of the extended homogeneous balance method.

Face Recognition Using LDA with Wavelet Transform Approach

Linear Discriminant Analysis （LDA） is one of the principal techniques used in face recognition systems. LDA is well-known scheme for feature extraction and dimension reduction. It provides improved performance over the standard Principal Component Analysis （PCA） method of face recognition by introducing the concept of classes and distance between classes. This paper provides an overview of PCA, the various variants of LDA and their basic drawbacks. The paper also has proposed a development over classical LDA, i.e., LDA using wavelets transform approach that enhances performance as regards accuracy and time complexity. Experiments on ORL face database clearly demonstrate this and the graphical comparison of the algorithms clearly showcases the improved recognition rate in case of the proposed algorithm.

An Image Encryption Approach Using a Shuffling Map

A new image encryption approach is proposed.First,a sort transformation based on nonlinear chaoticalgorithm is used to shuffle the positions of image pixels.Then the states of hyper-chaos are used to change the greyvalues of the shuffled image according to the changed chaotic values of the same position between the above nonlinearchaotic sequence and the sorted chaotic sequence.The experimental results demonstrate that the image encryptionscheme based on a shuffling map shows advantages of large key space and high-level security.Compared with someencryption algorithms,the suggested encryption scheme is more secure.

BALANCE ROUTING TRAFFIC IN GENERALIZED SHUFFLE-EXCHANGE NETWORK

A methodology is proposed to handle problem that under equiproble address of packet traffic at the input port, Generalized Shuffle-Exchange Network (GSEN) routes traffic unevenly because of the unbalanced routing tags. The idea is to use routing tag according to probability, which can be evaluated by using Moore-Penrose inverse in matrix analysis. An instance is used to illustrate the idea, and the simulation is done to show the improvement in performance issues.

Equilibrium and kinetics of copper ions removal from wastewater by ion exchange

The removal of copper ions from wastewater by ion exchange has been studied using an iminodiacetate resin.The capacity of the resin for the copper ions has been determined to be 2.30 mmol·g^(-1) by measuring the equilibrium isotherm at 25 °C and initial pH value of 3.5 where the final equilibrium p H value is 5. An analysis of equilibrium isotherm models showed that the best fit model was the Langmuir–Freundlich. The kinetics of the ion exchange process have been investigated and four kinetic models have been tested namely: Ritchie model, pseudo-second order model, pseudo-first order model and the Elovich model. The pseudo-second order model provides the best fit to the kinetic data.

Wavelet Transform-Based Distributed Compressed Sensing in Wireless Sensor Networks

Wireless Sensor Networks(WSN) are mainly characterized by a potentially large number of distributed sensor nodes which collectively transmit information about sensed events to the sink.In this paper,we present a Distributed Wavelet Basis Generation(DWBG) algorithm performing at the sink to obtain the distributed wavelet basis in WSN.And on this basis,a Wavelet Transform-based Distributed Compressed Sensing(WTDCS) algorithm is proposed to compress and reconstruct the sensed data with spatial correlation.Finally,we make a detailed analysis of relationship between reconstruction performance and WTDCS algorithm parameters such as the compression ratio,the channel Signal-to-Noise Ratio(SNR),the observation noise power and the correlation decay parameter by simulation.The simulation results show that WTDCS can achieve high performance in terms of energy and reconstruction accuracy,as compared to the conventional distributed wavelet transform algorithm.

An improved multiplicative exponent weighting vertical handoff algorithm for WLAN/WCDMA heterogeneous wireless networks

An improved MEW （ muhiplicative exponent weighting） algorithm, SLE-MEW is proposed for vertical handoff decision in heterogeneous wireless networks. It introduces the SINR（ signal to interference plus noise ratio） effects, LS （least square） and information entropy method into the algorithm. An attribute matrix is constructed considering the SINR in the source network and the equivalent SINR in the target network, the required bandwidth, the traffic cost and the available bandwidth of participating access networks. Handoff decision meeting multi-attribute QoS（quality of serv- ice） requirement is made according to the traffic features. The subjective weight relation of decision elements is determined with LS method. The information entropy method is employed to derive the objective weights of the evaluation criteria, and lead to the comprehensive weight. Finally decision is made using MEW algorithm based on the attribute matrix and weight vector. Four 3GPP（ the 3rd generation partnership project） defined traffic classes are considered in performance evaluation. The simulation results have shown that the proposed algorithm can provide satisfactory performance fitting to the characteristics of the traffic.

Low-power Analog VLSI Implementation of Wavelet Transform

For applications requiring low-power,low-voltage and real-time,a novel analog VLSI implementation of continuous Marr wavelet transform based on CMOS log-domain integrator is proposed. Marr wavelet is approximated by a parameterized class of function and with Levenbery-Marquardt nonlinear least square method,the optimum parameters of this function are obtained. The circuits of implementating Marr wavelet transform are composed of analog filter whose impulse response is the required wavelet. The filter design is based on IFLF structure with CMOS log-domain integrators as the main building blocks. SPICE simulations indicate an excellent approximations of ideal wavelet.

Suppression to the cross-channel interference based on the short time Fourier transform

A new cross-channel interference suppression method is proposed to decrease the cross-channel interference in beat signals based on the short time Fourier transform （STY3＂） and the inverse short time Fourier transform （ISTFT） when the dual-orthogonal polarimetric frequency-modulated continu- ous wave （FMCW） radar adopts the opposite-slope linear frequency modulation signal pair in the simultaneous measurement mode. The STFT is applied only on the signals in the cross-interference intervals in the four polarimetric channels to decrease the computation complexity. A mask matrix for suppressing the interference is constructed using the constant false alarm ratio （CFAR） detection on the spectrograms by the STFY. The simulative results show that the cross-channel interference is effi- ciently suppressed by the proposed method. The comparison between the proposed method and the rejection method verifies the improved performance of the proposed method.

Study on Weathering Behavior of Jack Pine Heat-Treated under Different Conditions

It is of considerable importance to investigate the influence of weathering on the degradation processes of heat-treated wood. Kiln-dried （untreated）jack pine （Pinus banksiana） and jack pine heat-treated at three different temperatures （190 ℃, 200 ℃, and 210 ℃） were exposed to artificial weathering for different periods in order to understand the degradation processes due to weathering. Before and after exposure, their color and wettability by water were determined. Structural changes and chemical modifications at exposed surfaces were also investigated using SEM （scanning electron spectroscopy）, FTIR （Fourier transforms infrared spectroscopy）, and XPS （X-ray photoelectron spectroscopy）. The results revealed that the photo-degradation of lignin and the presence of extractives play important roles in color change and wetting behavior of heat-treated wood surfaces during weathering. The structural changes also influence the wettability. The effects of weathering for woods heat-treated under different conditions were similar, but different from those for untreated wood.

Electron Beam Application for Regeneration of Catalysts Used in Refinery Cracking Units

A catalyst is a substance that alters the rate of a reaction. The process of catalysis is essential to the modem day manufacturing industry, mainly in FCC （Fluid Catalytic Cracking） process units. However, long-term exploitation of oil and gas processing catalysts leads to formation of carbon- and sulfur-containing structures of coke and dense products on the catalyst surface. They block reactive catalyst sites and reduce the catalytic activity. The main advantage of radiation processing by EB （electron beam） and gamma rays is chain cracking reaction in crude oil. Otherwise, under exposure to ionize radiation, considerable structure modification of equilibrium silica-alumina catalyst from FCC process may occur, in addition to the removal of impurities. The conditions applied in the irradiation range （20-150 kGy） of gamma rays and EB were not sufficient to alter the structure of the catalyst, whether for removal of the contaminant nickel, a major contaminant of the FCC catalyst, either to rupture of the crystalline structure either for the future reutilization of chemical elements. ATR-FTIR （Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy and EDXRFS （Energy Dispersive X-Ray Fluorescence Spectrometry） analysis were used to characterize and evaluate effects of radiation processing on equilibrium catalysts purification. To evaluate and comprehend the reactive catalyst sites, SEM （Scanning Electron Microscopy） and particle size distribution analyses were carried out.

On Triply Periodic Wave Solutions for(2+1)-Dimensional Boussinesq Equation

By employing Hirota bilinear method and Riemann theta functions of genus one,explicit triply periodic wave solutions for the(2+1)-dimensional Boussinesq equation are constructed under the Backlund transformation u =(1 /6)(u0 1) + 2[ln f(x,y,t)] xx,four kinds of triply periodic wave solutions are derived,and their long wave limit are discussed.The properties of one of the solutions are shown in Fig.1.

Identification of nonlinear multi-degree-of freedom structures based on Hilbert transformation

The modeling method and identified method adapted to multi-degree-of-freedom structures with strucrural nonlinearities are established.The component mode synthesis method is used to establish the nonlinear governing equations by extending the connected relationships.Based on the modeling method,the Hilbert transform method is applied to identify the nonlinear stiffness of multi-degree-of-freedom structures.Nonlinear analysis and identification of a typical folding wing configuration with three freeplay hinges are investigated.The nonlinear governing equation is established based on present methods and the computing results of different stiffness are checked by finite element programming.In order to illustrate the influence of the nonlinearities,the frequency response characteristics of the structure are analyzed and Hilbert transform is performed.The Hilbert transform identification method is utilized to identify the nonlinear stiffness of nonlinear hinges in the time domain and several parametric studies are performed.In addition,the comparison of response is made to illustrate the feasibility of the methods.The results show that the extending component mode synthesis method in the present work can be used to establish the governing equation with structural nonlinearities.Based on the modeling method,the Hilbert transform identified method can be extended to multi-degree-of-freedom structures accurately.

Thermal performances of non-equidistant helical-coil phase change accumulator for latent heat storage

Helical-coil is a common structure of heat exchanger unit in phase change heat accumulator and usually has the equal coil pitch between adjacent coils. Its thermal performances could be improved by improving the uniformity of the phase change material （PCM） temperature distribution. Thus, a novel non-equidistant helical-coil structure was proposed in this study. Its coil pitch decreased along the flow direction of heat transfer fluid, which made the heat exchange area in unit volume increase to match the decreasing temperature difference between the heat transfer fluid and PCM. The structure was optimized using numerical simulation. An experimental system was developed and the experiment results indicated that the proposed non-equidistant helical-coil heat accumulator was more effective than equidistant helical-coil for latent heat storage. The uniformity of the temperaalre distribution was also confirmed by simulation results.