Molten plastics are characterised with high viscosity and low thermal conductivity. Applying falling film pyrolysis reactor to deal with waste plastics can not only improve heat transfer efficiency, but also solve the...Molten plastics are characterised with high viscosity and low thermal conductivity. Applying falling film pyrolysis reactor to deal with waste plastics can not only improve heat transfer efficiency, but also solve the flow problem. In this work, the pyrolysis process of molten polypropylene （PP） in a vertical falling film reactor is experimentally studied, and the influence of heating temperature on pyrolysis products is discussed. It has been found that with the temperature increases from 550 ℃ to 625 ℃, the yield of pyrolysis oil decreases from 74.4 wt% （ 4- 2.2 wt/%） to 53.5 wt% （± 1.3 wt%）. The major compositions of the pyrolysis oil are C9, C12 and C18, and β-scission reactions are predominant. The content of the light fraction C6-C12 of pyrolysis oil is 69.7 wt%. Compared with other pyrolysis reactors, the yield ofoil from vertical falling film pyrolysis reactor is slightly higher than that from tubular reactor, equal to that from rotary kiln reactor, and slightly lower than that in medium fluidised-bed reactor.展开更多
基金Supported by the National Natural Science Foundation of China(51503154)Major Projects of China Water Pollution Control and Treatment Science and Technology(2017ZX07202005)the Shanghai Municipal Science and Technology Commission Fund for improving the economy in the Yangtze River Delta region(12195811100)
文摘Molten plastics are characterised with high viscosity and low thermal conductivity. Applying falling film pyrolysis reactor to deal with waste plastics can not only improve heat transfer efficiency, but also solve the flow problem. In this work, the pyrolysis process of molten polypropylene （PP） in a vertical falling film reactor is experimentally studied, and the influence of heating temperature on pyrolysis products is discussed. It has been found that with the temperature increases from 550 ℃ to 625 ℃, the yield of pyrolysis oil decreases from 74.4 wt% （ 4- 2.2 wt/%） to 53.5 wt% （± 1.3 wt%）. The major compositions of the pyrolysis oil are C9, C12 and C18, and β-scission reactions are predominant. The content of the light fraction C6-C12 of pyrolysis oil is 69.7 wt%. Compared with other pyrolysis reactors, the yield ofoil from vertical falling film pyrolysis reactor is slightly higher than that from tubular reactor, equal to that from rotary kiln reactor, and slightly lower than that in medium fluidised-bed reactor.
