The finite element method is first introduced into the design process of detecting electrodes of three electrode capacitance fuze, the mutual capacitance of the fuze and target is calculated by the finite element met...The finite element method is first introduced into the design process of detecting electrodes of three electrode capacitance fuze, the mutual capacitance of the fuze and target is calculated by the finite element method, which provides the parameters for simulation circuit and design of detecting electrode. The finite element method pierces the traditional method of designing detecting electrode-design, test and adjustment. The system capacitance can be calculated accurately and the performance can be predicted in the design period of the detecting electrode, which saves a lot of research fee. The capacitances of a mortar shell fuze above ground 2 m and lower are given. After putting the computing data into simulating circuit, the demodulation voltage can be obtained, its changing trend is in agreement with the tested result.展开更多
To study the problem of obstacle detection based on multi-sensors data fusion,the multi-target tracking theory and techniques are introduced into obstacle detection systems,and the exact position of obstacle can be de...To study the problem of obstacle detection based on multi-sensors data fusion,the multi-target tracking theory and techniques are introduced into obstacle detection systems,and the exact position of obstacle can be determined.Data fusion problems are discussed directly based on achievable data from some sensors without considering the specific structure of each individual sensor.With respect to normal linear systems and nonlinear systems,the corresponding algorithms are proposed.The validity of the method is confirmed by simulation results.展开更多
In this paper, we discuss and analyze theoretically probeabsorption-amplification response in a four-level coherent atomic system with vacuum-inducedcoherence via changing the sign of the parameter f, with f denoting ...In this paper, we discuss and analyze theoretically probeabsorption-amplification response in a four-level coherent atomic system with vacuum-inducedcoherence via changing the sign of the parameter f, with f denoting the ratio of a pair of dipolemoments associated with a doublet of closely upper hypernne sublevels. We find that the amplitude ofthe probe amplification for the case f = -1 can be about one order of magnitude larger than thatachievable for the case f = 1. In addition, with respect to the case f = -1 the probe amplificationcan be maintained all the time with weak incoherent pumping for a wide range of the probe detuning.展开更多
A new Frequency-Hopping(FH) signal detection method is proposed.Different from pre-vious methods which need to monitor the total band,it can monitor part of the band and decrease the range of the bandwidth.According t...A new Frequency-Hopping(FH) signal detection method is proposed.Different from pre-vious methods which need to monitor the total band,it can monitor part of the band and decrease the range of the bandwidth.According to this method,a new detection model is set and the computation formulas of the detection probability and false-alarm probability are given.The parameters of a VHF radio are used to prove the validity of the method.Simulation results show that this method can de-crease the range of the bandwidth and detect the FH signal with some penalty on the SNR and signal loss.展开更多
A novel superimposed photodetector （PD） is put forward. The photodetector can obtain a couple Of differential photocur- rent signals from one input optical signal. The light injection efficiency and the vertical wor...A novel superimposed photodetector （PD） is put forward. The photodetector can obtain a couple Of differential photocur- rent signals from one input optical signal. The light injection efficiency and the vertical work distance of this new.photode- tector are much higher than those of the others. The superimposed photodetctor is designed based on the standard 0.18 p.m CMOS process. The responsivity, bandwidth and transient response of the photodetector are simulated by a commercial simulation software of ATLAS. The responsivities of two obtained photocurrent signals are 0.035 A/W and 0.034 A/W, while the bandwidths are 3.8 GHz and 5.2 GHz, respectively. A full differential optical receiver which uses the superim- posed photodetector as input is simulated. The frequency response and 4 Gbit/s eye diagram of the optical receiver are also obtained. The results show that the two output signals can be used as the differential signal.展开更多
文摘The finite element method is first introduced into the design process of detecting electrodes of three electrode capacitance fuze, the mutual capacitance of the fuze and target is calculated by the finite element method, which provides the parameters for simulation circuit and design of detecting electrode. The finite element method pierces the traditional method of designing detecting electrode-design, test and adjustment. The system capacitance can be calculated accurately and the performance can be predicted in the design period of the detecting electrode, which saves a lot of research fee. The capacitances of a mortar shell fuze above ground 2 m and lower are given. After putting the computing data into simulating circuit, the demodulation voltage can be obtained, its changing trend is in agreement with the tested result.
基金Sponsored by the Science Foundation for Youths of Heilongjiang Province(Grant No.QC08C05)
文摘To study the problem of obstacle detection based on multi-sensors data fusion,the multi-target tracking theory and techniques are introduced into obstacle detection systems,and the exact position of obstacle can be determined.Data fusion problems are discussed directly based on achievable data from some sensors without considering the specific structure of each individual sensor.With respect to normal linear systems and nonlinear systems,the corresponding algorithms are proposed.The validity of the method is confirmed by simulation results.
文摘In this paper, we discuss and analyze theoretically probeabsorption-amplification response in a four-level coherent atomic system with vacuum-inducedcoherence via changing the sign of the parameter f, with f denoting the ratio of a pair of dipolemoments associated with a doublet of closely upper hypernne sublevels. We find that the amplitude ofthe probe amplification for the case f = -1 can be about one order of magnitude larger than thatachievable for the case f = 1. In addition, with respect to the case f = -1 the probe amplificationcan be maintained all the time with weak incoherent pumping for a wide range of the probe detuning.
文摘A new Frequency-Hopping(FH) signal detection method is proposed.Different from pre-vious methods which need to monitor the total band,it can monitor part of the band and decrease the range of the bandwidth.According to this method,a new detection model is set and the computation formulas of the detection probability and false-alarm probability are given.The parameters of a VHF radio are used to prove the validity of the method.Simulation results show that this method can de-crease the range of the bandwidth and detect the FH signal with some penalty on the SNR and signal loss.
基金supported by the National Natural Science Foundation of China(No.61036002)the Natural Science Foundation of Tianjin(No.11JCZDJC15100)
文摘A novel superimposed photodetector （PD） is put forward. The photodetector can obtain a couple Of differential photocur- rent signals from one input optical signal. The light injection efficiency and the vertical work distance of this new.photode- tector are much higher than those of the others. The superimposed photodetctor is designed based on the standard 0.18 p.m CMOS process. The responsivity, bandwidth and transient response of the photodetector are simulated by a commercial simulation software of ATLAS. The responsivities of two obtained photocurrent signals are 0.035 A/W and 0.034 A/W, while the bandwidths are 3.8 GHz and 5.2 GHz, respectively. A full differential optical receiver which uses the superim- posed photodetector as input is simulated. The frequency response and 4 Gbit/s eye diagram of the optical receiver are also obtained. The results show that the two output signals can be used as the differential signal.
