InAs is a direct, narrow band gap （0.354 eV） material with ultrahigh electron mobility, and is potentially a good optoelectronic device candidate in the wide UV-visible-near-infrared region. In this work we report t...InAs is a direct, narrow band gap （0.354 eV） material with ultrahigh electron mobility, and is potentially a good optoelectronic device candidate in the wide UV-visible-near-infrared region. In this work we report the fabrication of InAs nanowire-based photodetectors, which showed a very high photoresponse over a broad spectral range from 300 to 1,100 nm. The responsivity, external quantum efficiency and detectivity of the device were respectively measured to be 4.4 × 103 AW , 1.03 × 106%, and 2.6 × 1011 Jones to visible incident light. Time dependent measurements at different wavelengths and under different light intensities also demonstrated the fast, reversible, and stable photoresponse of our device. Theoretical calculations of the optical absorption and the electric field component distribution were also performed to elucidate the mechanism of the enhanced photoresponse. Our results demonstrate that the single-crystalline InAs NWs are very promising candidates for the design of high sensitivity and high stability nanoscale photodetectors with a broad band photoresponse.展开更多
A novel light scattering technique for mapping metal surface corrosion is presented and its results on copper exposed to atmosphere are reported. The front end of the instrument is made up of a sensor module comprisin...A novel light scattering technique for mapping metal surface corrosion is presented and its results on copper exposed to atmosphere are reported. The front end of the instrument is made up of a sensor module comprising a thin beam light emitting diode (LED) illuminating a small spot on the metal surface, and a matched pair of photodetectors, one for capturing the reflected light and the other for sampling the scattered light. The analog photocurrent signals are digitized and processed online by a personal computer (PC) to determine the corrosion factor defined in terms of the two current values. By scanning the sample surface using the light beam and by computing the corrosion factor values simultaneously, a three dimensional graph and a two dimensional contour map are generated in the PC using Matlab tools. The values of the corrosion factor measured in different durations of exposure to atmosphere, which obey a bilogarithmic law, testify to the validity of our mathematical model.展开更多
基金Acknowledgements This work was supported by the National Natural Science Foundation （Nos. 91123008, 51002059, 21001046）, the 973 Program of China （No. 2011CB933300）, and the Program for New Century Excellent Talents of the Universities in China （grant No. NCET-11-0179）. We thank the Analytical and Testing Center of Huazhong University of Science and Technology for measurements.
文摘InAs is a direct, narrow band gap （0.354 eV） material with ultrahigh electron mobility, and is potentially a good optoelectronic device candidate in the wide UV-visible-near-infrared region. In this work we report the fabrication of InAs nanowire-based photodetectors, which showed a very high photoresponse over a broad spectral range from 300 to 1,100 nm. The responsivity, external quantum efficiency and detectivity of the device were respectively measured to be 4.4 × 103 AW , 1.03 × 106%, and 2.6 × 1011 Jones to visible incident light. Time dependent measurements at different wavelengths and under different light intensities also demonstrated the fast, reversible, and stable photoresponse of our device. Theoretical calculations of the optical absorption and the electric field component distribution were also performed to elucidate the mechanism of the enhanced photoresponse. Our results demonstrate that the single-crystalline InAs NWs are very promising candidates for the design of high sensitivity and high stability nanoscale photodetectors with a broad band photoresponse.
文摘A novel light scattering technique for mapping metal surface corrosion is presented and its results on copper exposed to atmosphere are reported. The front end of the instrument is made up of a sensor module comprising a thin beam light emitting diode (LED) illuminating a small spot on the metal surface, and a matched pair of photodetectors, one for capturing the reflected light and the other for sampling the scattered light. The analog photocurrent signals are digitized and processed online by a personal computer (PC) to determine the corrosion factor defined in terms of the two current values. By scanning the sample surface using the light beam and by computing the corrosion factor values simultaneously, a three dimensional graph and a two dimensional contour map are generated in the PC using Matlab tools. The values of the corrosion factor measured in different durations of exposure to atmosphere, which obey a bilogarithmic law, testify to the validity of our mathematical model.
