The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum ...The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.展开更多
This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current te...This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.展开更多
A new vision coordinate measuring system--single camera 3 D coordinate measuring system based on optical probe imaging is presented. A new idea in vision coordinate measurement is proposed. A linear model is deduced w...A new vision coordinate measuring system--single camera 3 D coordinate measuring system based on optical probe imaging is presented. A new idea in vision coordinate measurement is proposed. A linear model is deduced which can distinguish six freedom degrees of optical probe to realize coordinate measurement of the object surface. The effects of some factors on the resolution of the system are analyzed. The simulating experiments have shown that the system model is available.展开更多
Seismic inversion and basic theory are briefly presented and the main idea of this method is introduced. Both non-linear wave equation inversion technique and Complete Utilization of Samples Information (CUSI) neural ...Seismic inversion and basic theory are briefly presented and the main idea of this method is introduced. Both non-linear wave equation inversion technique and Complete Utilization of Samples Information (CUSI) neural network analysis are used in lithological interpretation in Jibei coal field. The prediction results indicate that this method can provide reliable data for thin coal exploitation and promising area evaluation.展开更多
Watermelon is a popular fruit in the world with soluble solids content （SSC） being one of the major characteristics used for assessing its quality. This study was aimed at obtaining a method for nondestructive SSC d...Watermelon is a popular fruit in the world with soluble solids content （SSC） being one of the major characteristics used for assessing its quality. This study was aimed at obtaining a method for nondestructive SSC detection of watermelons by means of visible/near infrared （Vis/NIR） diffuse transmittance technique. Vis/NIR transmittance spectra of intact watermelons were acquired using a low-cost commercially available spectrometer operating over the range 350-1000 nm. Spectra data were analyzed by two multivariate calibration techniques： partial least squares （PLS） and principal component regression （PCR） methods. Two experiments were designed for two varieties of watermelons [Qilin （QL）, Zaochunhongyu （ZC）], which have different skin thickness range and shape dimensions. The influences of different data preprocessing and spectra treatments were also investigated. Performance of different models was assessed in terms of root mean square errors of calibration （RMSEC）, root mean square errors of prediction （RMSEP） and correlation coefficient （r） between the predicted and measured parameter values. Results showed that spectra data preprocessing influenced the performance of the calibration models. The first derivative spectra showed the best results with high correlation coefficient of determination [r=0.918 （QL）; r=0.954 （ZC）], low RMSEP [0.65 °Brix （QL）; 0.58 °Brix （ZC）], low RMSEC [0.48 °Brix （QL）; 0.34°Brix （ZC）] and small difference between the＇RMSEP and the RMSEC by PLS method. The nondestructive Vis/NIR measurements provided good estimates of SSC index of watermelon, and the predicted values were highly correlated with destructively measured values for SSC. The models based on smoothing spectra （Savitzky-Golay filter smoothing method） did not enhance the performance of calibration models obviously. The results indicated the feasibility of Vis/NIR diffuse transmittance spectral analysis for predicting watermelon SSC in a nondestructive way.展开更多
A laser collimating system based on 2-D position sensitive detector (PSD) is presented in this paper. The working principle of PSD is depicted in detail. A calibration device was developed to check the nonlinearity er...A laser collimating system based on 2-D position sensitive detector (PSD) is presented in this paper. The working principle of PSD is depicted in detail. A calibration device was developed to check the nonlinearity errors of PSD and a multilayer feedforward neural network based on error back-propagation algorithm was used to compensate errors. With the aid of computer-based data acquisition system, an automatic dynamic measuring process was realized. A series of experiments, including comparison tests with laser interferometer, were done to evaluate the performance of the measuring system. The experimental results show that the spatial straightness errors of guide rails can be measured with high accuracy. The maximum differences between the device and laser interferometer are 0.027 mm in Y direction, and 0.053 mm in X direction in the measuring distance of 6 m.展开更多
In industrial X-ray inspection, in order to identify weld defects automatically, raise the identification ratio, and avoid processing of complex background, it is an important step for sequent processing to extract we...In industrial X-ray inspection, in order to identify weld defects automatically, raise the identification ratio, and avoid processing of complex background, it is an important step for sequent processing to extract weld from the image. According to the characteristics of weld radiograph image, median filter is adopted to reduce the noise with high frequency, then relative gray-scale of image is chosen as fuzzy characteristic, and image gray-scale fuzzy matrix is constructed and suitable membership function is selected to describe edge characteristic. A fuzzy algorithm is adopted for enhancing radiograph image processing. Based on the intensity distribution characteristic in weld, methodology of weld extraction is then designed. This paper describes the methodology of all the weld extraction, including reducing noise, fuzzy enhancement and weld extraction process. To prove its effectiveness, this methodology was tested with 64 weld negative images available for this study. The experimental results show that this methodology is very effective for extracting linear weld.展开更多
文摘The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.
文摘This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.
文摘A new vision coordinate measuring system--single camera 3 D coordinate measuring system based on optical probe imaging is presented. A new idea in vision coordinate measurement is proposed. A linear model is deduced which can distinguish six freedom degrees of optical probe to realize coordinate measurement of the object surface. The effects of some factors on the resolution of the system are analyzed. The simulating experiments have shown that the system model is available.
文摘Seismic inversion and basic theory are briefly presented and the main idea of this method is introduced. Both non-linear wave equation inversion technique and Complete Utilization of Samples Information (CUSI) neural network analysis are used in lithological interpretation in Jibei coal field. The prediction results indicate that this method can provide reliable data for thin coal exploitation and promising area evaluation.
基金Project supported by the National Natural Science Foundation of China (No. 30370371) and Program for New Century Excellent Talents in University (No. NCET-04-0524), China
文摘Watermelon is a popular fruit in the world with soluble solids content （SSC） being one of the major characteristics used for assessing its quality. This study was aimed at obtaining a method for nondestructive SSC detection of watermelons by means of visible/near infrared （Vis/NIR） diffuse transmittance technique. Vis/NIR transmittance spectra of intact watermelons were acquired using a low-cost commercially available spectrometer operating over the range 350-1000 nm. Spectra data were analyzed by two multivariate calibration techniques： partial least squares （PLS） and principal component regression （PCR） methods. Two experiments were designed for two varieties of watermelons [Qilin （QL）, Zaochunhongyu （ZC）], which have different skin thickness range and shape dimensions. The influences of different data preprocessing and spectra treatments were also investigated. Performance of different models was assessed in terms of root mean square errors of calibration （RMSEC）, root mean square errors of prediction （RMSEP） and correlation coefficient （r） between the predicted and measured parameter values. Results showed that spectra data preprocessing influenced the performance of the calibration models. The first derivative spectra showed the best results with high correlation coefficient of determination [r=0.918 （QL）; r=0.954 （ZC）], low RMSEP [0.65 °Brix （QL）; 0.58 °Brix （ZC）], low RMSEC [0.48 °Brix （QL）; 0.34°Brix （ZC）] and small difference between the＇RMSEP and the RMSEC by PLS method. The nondestructive Vis/NIR measurements provided good estimates of SSC index of watermelon, and the predicted values were highly correlated with destructively measured values for SSC. The models based on smoothing spectra （Savitzky-Golay filter smoothing method） did not enhance the performance of calibration models obviously. The results indicated the feasibility of Vis/NIR diffuse transmittance spectral analysis for predicting watermelon SSC in a nondestructive way.
文摘A laser collimating system based on 2-D position sensitive detector (PSD) is presented in this paper. The working principle of PSD is depicted in detail. A calibration device was developed to check the nonlinearity errors of PSD and a multilayer feedforward neural network based on error back-propagation algorithm was used to compensate errors. With the aid of computer-based data acquisition system, an automatic dynamic measuring process was realized. A series of experiments, including comparison tests with laser interferometer, were done to evaluate the performance of the measuring system. The experimental results show that the spatial straightness errors of guide rails can be measured with high accuracy. The maximum differences between the device and laser interferometer are 0.027 mm in Y direction, and 0.053 mm in X direction in the measuring distance of 6 m.
文摘In industrial X-ray inspection, in order to identify weld defects automatically, raise the identification ratio, and avoid processing of complex background, it is an important step for sequent processing to extract weld from the image. According to the characteristics of weld radiograph image, median filter is adopted to reduce the noise with high frequency, then relative gray-scale of image is chosen as fuzzy characteristic, and image gray-scale fuzzy matrix is constructed and suitable membership function is selected to describe edge characteristic. A fuzzy algorithm is adopted for enhancing radiograph image processing. Based on the intensity distribution characteristic in weld, methodology of weld extraction is then designed. This paper describes the methodology of all the weld extraction, including reducing noise, fuzzy enhancement and weld extraction process. To prove its effectiveness, this methodology was tested with 64 weld negative images available for this study. The experimental results show that this methodology is very effective for extracting linear weld.
