Beidou receiver based on anti-jamming antenna arrays with self-calibration for precise relative positioning

Unmanned aerial vehicles(UAVs)may be subjected to unintentional radio frequency interference(RFI)or hostile jamming attack which will lead to fail to track global navigation satellite system(GNSS)signals.Therefore,the simultaneous realization of anti-jamming and high-precision carrier phase difference positioning becomes a dilemmatic problem.In this paper,a distortionless phase digital beamforming(DBF)algorithm with self-calibration antenna arrays is proposed,which enables to obtain distortionless carrier phase while suppressing jamming.Additionally,architecture of high precision Beidou receiver based on anti-jamming antenna arrays is proposed.Finally,the performance of the algorithm is evaluated,including antenna calibration accuracy,carrier phase distortionless accuracy,and carrier phase measurement accuracy without jamming.Meanwhile,the maximal jamming to signal ratio(JSR)and real time kinematic(RTK)positioning accuracy under wideband jamming are also investigated.The experimental results based on the real-life Beidou signals show that the proposed method has an excellent performance for precise relative positioning under jamming when compared with other anti-jamming methods.

Fast measurement and prediction method for electromagnetic susceptibility of receiver

Aiming at evaluating and predicting rapidly and accurately a high sensitivity receiver’s adaptability in complex electromagnetic environments,a novel testing and prediction method based on dual-channel multi-frequency is proposed to improve the traditional two-tone test.Firstly,two signal generators are used to generate signals at the radio frequency(RF)by frequency scanning,and then a rapid measurement at the intermediate frequency(IF)output port is carried out to obtain a huge amount of sample data for the subsequent analysis.Secondly,the IF output response data are modeled and analyzed to construct the linear and nonlinear response constraint equations in the frequency domain and prediction models in the power domain,which provide the theoretical criteria for interpreting and predicting electromagnetic susceptibility(EMS)of the receiver.An experiment performed on a radar receiver confirms the reliability of the method proposed in this paper.It shows that the interference of each harmonic frequency and each order to the receiver can be identified and predicted with the sensitivity model.Based on this,fast and comprehensive evaluation and prediction of the receiver’s EMS in complex environment can be efficiently realized.

Wideband spectrum sensing using step-sampling based on the multipath nyquist folding receiver

Wideband spectrum sensing with a high-speed analog-digital converter(ADC) presents a challenge for practical systems.The Nyquist folding receiver(NYFR) is a promising scheme for achieving cost-effective real-time spectrum sensing,which is subject to the complexity of processing the modulated outputs.In this case,a multipath NYFR architecture with a step-sampling rate for the different paths is proposed.The different numbers of digital channels for each path are designed based on the Chinese remainder theorem(CRT).Then,the detectable frequency range is divided into multiple frequency grids,and the Nyquist zone(NZ) of the input can be obtained by sensing these grids.Thus,high-precision parameter estimation is performed by utilizing the NYFR characteristics.Compared with the existing methods,the scheme proposed in this paper overcomes the challenge of NZ estimation,information damage,many computations,low accuracy,and high false alarm probability.Comparative simulation experiments verify the effectiveness of the proposed architecture in this paper.

Crustal structure in the Anyuan Coal Mine and its adjacent areas of Jiangxi Province by P-wave receiver functions

We collected high-quality teleseismic events recorded by 12 broadband seismographs deployed in the Anyuan Coal Mine and its adjacent areas in Pingxiang City,Jiangxi Province for nearly two years.The H-κ-c stacking method was employed to obtain the crustal thickness and Poisson's ratio distribution,then the characteristics of crustal structure below the stations were obtained by using the time-domain linear inversion method.The crustal thickness in the Anyuan Coal Mine and its adjacent areas ranges from approximately 32~35 km,with an average thickness of 33 km,which is consistent with the crustal thickness results in South China from previous studies using the receiver function method.The average Poisson's ratio of the crustal bulk composition in the study area varies between 0.22 and 0.25,which is lower than the global value with a 0.27 average,indicating a predominantly intermediate-acidic or felsic crustal composition.There is a weak negative correlation between Poisson's ratio and crustal thickness estimates in the Anyuan Coal Mine and its adjacent areas,suggesting that the absence of mafic-ultramafic materials in the lower crust is associated with the process of crustal delamination.The velocity inversion results indicate that the crustal structure including three velocity discontinuity interfaces,with the first at a depth of approximately 1.5 km,the second at about 10~15 km,and the third being the Moho.The study also indicates that the results obtained by the H-κ-c stacking method are significantly better than those obtained by the H-κmethod,effectively reducing the standard deviation and dispersion of crustal thickness and vP/vSratio.

Crustal and uppermost mantle structure of the northeastern Qinghai-Xizang Plateau from joint inversion of surface wave dispersions and receiver functions with P velocity constraints

Lithospheric structure beneath the northeastern Qinghai-Xizang Plateau is of vital significance for studying the geodynamic processes of crustal thickening and expansion of the Qinghai-Xizang Plateau. We conducted a joint inversion of receiver functions and surface wave dispersions with P-wave velocity constraints using data from the Chin Array Ⅱ temporary stations deployed across the Qinghai-Xizang Plateau. Prior to joint inversion, we applied the H-κ-c method(Li JT et al., 2019) to the receiver function data in order to correct for the back-azimuthal variations in the arrival times of Ps phases and crustal multiples caused by crustal anisotropy and dipping interfaces. High-resolution images of vS, crustal thickness, and vP/vSstructures in the Qinghai-Xizang Plateau were simultaneously derived from the joint inversion. The seismic images reveal that crustal thickness decreases outward from the Qinghai-Xizang Plateau. The stable interiors of the Ordos and Alxa blocks exhibited higher velocities and lower crustal vP/vSratios. While, lower velocities and higher vP/vSratios were observed beneath the Qilian Orogen and Songpan-Ganzi terrane(SPGZ), which are geologically active and mechanically weak, especially in the mid-lower crust.Delamination or thermal erosion of the lithosphere triggered by hot asthenospheric flow contributes to the observed uppermost mantle low-velocity zones(LVZs) in the SPGZ. The crustal thickness, vS, and vP/vSratios suggest that whole lithospheric shortening is a plausible mechanism for crustal thickening in the Qinghai-Xizang Plateau, supporting the idea of coupled lithospheric-scale deformation in this region.

High Sensitivity Digital Instantaneous Frequency Measurement Receiver for Precise Frequency Analysis

There are numerous applications, such as Radar, that leverage wideband technology. However, the presence of noise introduces certain limitations and challenges. It is crucial to harness wideband technology for applications demanding the rapid and precise transmission of diverse information from one point to another within a short timeframe. The ability to report a signal without tuning within the input bandwidth stands out as one of the advantages of employing a digital wideband receiver. As indicated, a digital wideband receiver plays a pivotal role in achieving high precision and accuracy. The primary distinction between Analog and Digital Instantaneous Frequency Measurement lies in the fact that analog Instantaneous Frequency Measurement (IFM) receivers have traditionally covered extensive input bandwidths, reporting one accurate frequency per short pulse. In the contemporary landscape, digital IFM systems utilize high-sampling-rate Analog-to-Digital Converters (ADC) along with Hilbert transforms to generate two output channels featuring a 90-degree phase shift. This paper explores the improvement of sensitivity in current digital IFM receivers. The optimization efforts target the Hilbert transform and autocorrelations architectures, aiming to refine the system’s ability to report fine frequencies within a noisy wide bandwidth environment, thereby elevating its overall sensitivity.

Constraining the crustal structure under the central and western Tian Shan based on teleseismic receiver functions and gravity anomalies

The Tian Shan is a vast range that spans several countries in Asia.Understanding its evolutionary history may provide valuable insights into intracontinental orogenic dynamics.In this study,we explored the crustal characteristics of the Tian Shan and their relationships to the tectonic evolution of the region.A new H-stacking method that combines the P receiver function and gravity anomalies was used to estimate the thickness and ratio of P-to S-wave velocities(Vp/Vs)for 91 broadband seismic stations in the central and western Tian Shan.Our results revealed significant lateral variations in crustal thickness and Vp/Vs.A—45-km-thick crust and an intermediate-high Vp/Vs(-1.74-1.84)were found in the Kazakh Shield and Tarim Basin,which we interpreted to indicate a mafic crystalline basement and lower crust.The central Tian Shan varied greatly in crustal thickness(40-64 km)and Vp/Vs ratio(1.65-2.00).which may be due to crustal shortening,mafic underplating,and crustal melting.In contrast,we observed a relatively thin crust(42-50 km)with an intermediate Vp/Vs ratio(-1.78)in the western Tian Shan.The differences in the crustal structures between the western and central Tian Shan imply that the Talas-Fergana Fault may be trans-lithospheric.

Deep learning-based LPI radar signals analysis and identification using a Nyquist Folding Receiver architecture

Nyquist Folding Receiver(NYFR)is a perceptron structure that realizes a low probability of intercept(LPI)signal analog to information.Aiming at the problem of LPI radar signal receiving,the time domain,frequency domain,and time-frequency domain problems of signals intercepted by NYFR structure are studied.Combined with the time-frequency analysis(TFA)method,a radar recognition scheme based on deep learning(DL)is introduced,which can reliably classify common LPI radar signals.First,the structure of NYFR and its characteristics in the time domain,frequency domain,and time and frequency domain are analyzed.Then,the received signal is then converted into a time-frequency image(TFI).Finally,four kinds of DL algorithms are used to classify LPI radar signals.Simulation results demonstrate the correctness of the NYFR structure,and the effectiveness of the proposed recognition method is verified by comparison experiments.

Waste Heat Recovery from a Drier Receiver of an A/C Unit Using Thermoelectric Generators

Thermoelectric generators(TEGs)are considered promising devices for waste heat recovery from various systems.The Seebeck effect can be utilized to generate power using the residual heat emitted by the filter dryer receiver(FDR)of an air conditioning(A/C)system,which would otherwise go to waste.The study aims to build a set of thermoelectric generators(TEG)to collect the waste heat of the FDR and generate low-power electricity.A novel electrical circuit with two transformers is designed and fabricated to produce a more stable voltage for operation and charging.The thermoelectric generator(TEGs)was installed on the FDR of the A/C unit.The test showed that climate conditions have a significant impact on the output power generated from the system.The results showed that the peak voltage recorded in the current study is 5.2 V per day(wet,cold,and wind weather)with an output power of 0.2 W.These values are acceptable for powering the load and charging a single battery with 3.5 V as the voltage increases battery 0.1 V/20 min charge.A case study of operating the emergency signs in a building was considered.The current heat recovery system is deemed to be easily installed and can be connected to a network of TEGs to produce more power.

Long-term and short-term stability characteristics of receiver inter system bias for BDS3/BDS2

The study of inter-system bias(ISB)is important for multi-system fusion and the performance of different signal compatibility.In this paper,the stability of ISB at the BDS3/BDS2 receiver end is calculated and analyzed for different time spans(DOY 060~090 in 2021)from a total of 31 MGEX and iGMAS stations.We adopted two estimation strategies,random walk and constant approach,using the precision products of orbit and clock bias provided by WUM,the influence of which on ISB was also analyzed.Our results showed that the ISB value varied little within a day,and the mean of daily ISB standard deviation was only 0.037 m when the observation condition was good.The signal reception was continuous,indicating a high ISB stability for one day.If extending the time series to one month,however,the ISB standard deviation calculated by constant approach,in which a constant ISB is estimated on a daily basis was about 0.1 m,and the results of adjacent days were not continuous,with no apparent pattern.Concerning the random walk approach,the obtained ISB time series also had a jump,and the conclusion was the same as that of the constant strategy.Besides,receiver types showed a strong regularity in ISB numerical situation,and the distribution of ISB values corresponding to the same receiver type was relatively close.Therefore,we conclude that the ISB parameters remain stable in the short term(one day)and less stable in the long-term period.It is recommended that the ISB term should be set as a constant estimate every day in BDS3/BDS2 solutions,regardless of receiver type consistency.

运动员接受社会支持与运动表现关系的研究进展

社会支持被认为是运动员的重要资源,运动员接受社会支持对运动表现有积极作用,但在两者的关系研究中缺乏证据整合及实证研究。基于此,本文首先以运动员接受社会支持不同方式和来源以及对不同群体运动员产生的积极作用进行证据回顾,提供了较为完整全面的证据。其次,阐明了运动员接受社会支持与运动表现之间的影响机制,总结出社会支持不仅有中介变量的作用,还可以通过其他影响因素间接影响运动员的运动表现。最后,基于已有研究进展,指出未来研究的3个主要方向:(1)丰富不同运动项目的运动员接受社会支持对运动表现影响的案例研究;(2)明确运动员接受社会支持的方式和来源的差异对运动表现的影响作用;(3)探究运动员接受社会支持与运动表现内外部因素影响的整合模型。

慢性肾脏病接受透析的患者经验性回避的研究进展

慢性肾脏病(CKD)已成为严重影响全球健康的公共卫生问题之一,而接受透析是终末期肾病患者的主要替代治疗方法,接受透析的患者常因疾病的不可治愈性、透析过程中的不适感,再加上社会因素,经济因素及患者个性心理特征、情感等方面问题,极易产生焦虑、抑郁等心理问题。透析患者的心理问题,不仅导致患者依从性下降,还影响患者生活质量,增加患者病死率。经验性回避已被证实可预测多种疾病患者的心理健康问题。本文对CKD接受透析的患者经验性回避的影响因素、作用及干预策略等方面进行综述,为改善CKD接受透析的患者心理障碍的护理提供参考。

A seafloor electromagnetic receiver for marine magnetotellurics and marine controlled-source electromagnetic sounding

In planning and executing marine controlled-source electromagnetic methods, seafloor electromagnetic receivers must overcome the problems of noise, clock drift, and power consumption. To design a receiver that performs well and overcomes the abovementioned problems, we performed forward modeling of the E-field abnormal response and established the receiver＇s characteristics. We describe the design optimization and the properties of each component, that is, low-noise induction coil sensor, low-noise Ag/AgCI electrode, low-noise chopper amplifier, digital temperature-compensated crystal oscillator module, acoustic telemetry modem, and burn wire system. Finally, we discuss the results of onshore and offshore field tests to show the effectiveness of the developed seafloor electromagnetic receiver and its performance： typical E-field noise of 0.12 nV/m/rt（Hz） at 0.5 Hz, dynamic range higher than 120 dB, clock drift lower than 1 ms/day, and continuous operation of at least 21 days.

变形链球菌mutans表面蛋白P1对人唾液接受器研究

收集人刺激性腮腺唾液，在碱性条件下聚丙烯酰胺凝胶电泳纯化唾液蛋白７种，命名为Ｂ１～Ｂ７，分别包被羟磷灰石珠，用１３１碘标记纯化的变形谜球菌ＭＴ６Ｒ（血清型ｃ）粘附素蛋白Ｐ１，观察其对每种唾液蛋白的粘附能力，以研究变形链珠菌粘附素蛋白Ｐ１的接受器。结果显示变形链球菌ｍｕｔａｎｓ表面蛋白Ｐ１对不同唾液蛋白的粘附量不同，具有选择性（Ｐ＜０．０１），对Ｂ５，Ｂ６粘附量特别高。已证实Ｂ５，Ｂ６为酸性富脯蛋白，提示酸性富脯蛋白可能为变形链球菌粘附素蛋白Ｐ１的重要接受器之一。

Design and Implementation of an Optoelectronic Integrated Receiver in Standard CMOS Process

A wideband monolithic optoelectronic integrated receiver with a high-speed photo-detector,completely compatible with standard CMOS processes,is designed and implemented in 0.6μm standard CMOS technology.The experimental results demonstrate that its performance approaches applicable requirements,where the photo-detector achieves a -3dB frequency of 1.11GHz,and the receiver achieves a 3dB bandwidth of 733MHz and a sensitivity of -9dBm for λ=850nm at BER=10-12.

Architecture design of GPS software receiver and implementation of its acquisition algorithm with fine frequency estimation

The design of a global positioning system （GPS） software receiver is introduced. This design uses the concept of software radio, and it consists of the following parts： front-end, acquisition, tracking, synchronization, navigation solution and some assisting modules. In the acquisition module, the acquisition algorithm based on circular correlation is utilized. The input data and the local code are converted into the frequency domain by means of the fast Fourier transform （FFT）. After performing circular correlation, the initial phase of the C/A code can be obtained and the cartier frequency can be found in 1 kHz frequency resolution, which is too coarse to use for the tracking loop. In order to improve the frequency resolution, the fine frequency estimation through a phase relationship is then achieved, by which, the frequency resolution is improved dramatically. Experiments show that the inaccuracy of the carrier frequency can be estimated within a few hertz by the fine frequency estimation method, and the fine frequency attained can be directly used for the tracking loop.

Concept and Design of a Novel High-Bandwidth,High-Sensitivity Differential Receiver for Optical Interconnections

A novel high-bandwidth, high-sensitivity differential optical receiver without any additional cost compared to general optical receivers, is proposed for high-speed optical communications and interconnections. High bandwidth and high sensitivity are achieved through a fully differential transimpedance amplifier with balanced input loads and two photodetectors to convert the incident light into a pair of differential photogenerated currents,respectively. In addition,a corresponding 0.35μm standard CMOS optoelectronic integrated receiver with two 60μm × 30μm, 1. 483pF fingered p^＋/n- well/p-substrate photodiodes is also presented. The simulation results demonstrate that it achieves a 1.37GHz bandwidth and a 81.9dBΩ transimpedance gain,supporting data rates up to at least 2Gbit/s. The device consumes a core area of 0. 198mm^2 and the optical sensitivity is at least - 13dBm for a 10^-12 bit error rate under a 2^15 - 1 PRBS input signal.

A 1.8V CMOS Direct Conversion Receiver for a 900MHz RFID Reader Chip

A direct conversion receiver with optimized tolerance to local carrier interference is designed and implemented in a 0.18μm 1P6M mixed-signal CMOS process for a 900MHz RFID reader transceiver. A baseband amplifier with series feedback topology is proposed to achieve passive mixer buffering,baseband DC cancellation,and signal amplification simultaneously. The receiver has a measured input ldB compression point of - 4dBm and a sensitivity of - 70dBm when 10dB SNR for digital demodulation is required. The receiver is integrated in a reader transceiver chip and consumes 90mA from a 1.8V supply.

NEW ALGORITHM FOR RECEIVER AUTONOMOUS INTEGRITY MONITORING

A new integrity metric for navigation systems is proposed based on the measurement domain. Proba-hilistic optimization design offers tools for fault detection by considering the required navigation performance （RNP） parameter and the uncertainty noise. The choice of the proper performance parameter provided the single-valued mapping with the missed detection probability estimates the probability of failure. The desirable characteristics of the residual sensitivity matrix are exploited to increase the efficiency for identifying erroneous observations. The algorithm can be used to support the performance specification and the efficient calculation of the integrity monitoring process. The simulation for non-precision approach （NPA） validates both the viability and the effectiveness of the proposed algorithm.

A study on deep structure using teleseismic receiver function in Western Yunnan

s Western Yunnan is located at the boundary of collision or underthrusting zone of Eurasian plate and is influenced by many times tectonic movements. With very complex geological environment and tectonic background, it is one of the seismically active areas. In the paper, the teleseismic records were selected from 16 national, local and mo-bile stations, including 4 very-wide-band mobile stations of PASSCAL. And nearly 2 000 receiver functions were extracted. Two measuring lines are 650 km and 450 km, respectively and across some major tectonic units in Western Yunnan. It is indicated that Nujiang might be a seam characterized by underthrusting. The western and eastern boundaries of Sichuan-Yunnan rhombus block, i.e., Honghe and Xiaojiang faults, might be an erection seam or collision belt. Panxi tectonic zone still has the characteristics of continental rift valley, that is, the surface is hollow and the upper mantle is upwarping. The tectonic situation in Western Yunnan is of certain regulation with the interlacing distribution of orogenic zone and seam. The crustal thickness decreases gradually from the north to the south and the S wave velocity is globally lower here.