The schemes and effects of electronically jamming GPS’s C/A code receivers are studied by using CW as the narrow band jamming signal and BPSK signal modulated by Gold code which is incoherent to that adopted by GPS ...The schemes and effects of electronically jamming GPS’s C/A code receivers are studied by using CW as the narrow band jamming signal and BPSK signal modulated by Gold code which is incoherent to that adopted by GPS as the wide band one. By simulating with Monte Carlo method and programming in Matlab language, the various jamming results in terms of bit error rate under several jamming scenarios are obtained. Through analyzing the simulation results and quantitative dependences of jamming effects on the distance from jammer to GPS receiver and the jammer’s height over ground, it is concluded that jamming with wide band jammer is much more effective than that with narrow band one.展开更多
The detection performance is evaluated for our proposed analog multiuser receiver in Ultra-WideBand (UWB) transmitted-reference system. In the presence of dense multipath and multi-access signals,the performance analy...The detection performance is evaluated for our proposed analog multiuser receiver in Ultra-WideBand (UWB) transmitted-reference system. In the presence of dense multipath and multi-access signals,the performance analysis is difficult due to the complicated waveform of received impulse. We develop an approach to analyze the steady-state Signal-to-Interference-plus-Noise (SINR) of the detector output. The multipath-spread impulse is fitted to an exponentially decaying profile in the analysis. A closed-form expression of steady-state SINR is further deduced for the proposed Least Minimum Square (LMS) detector. The analysis is validated by simulations in Line-Of-Sight (LOS) and Non-Line-Of-Sight (NLOS) channel respectively. Based on the theoretical results,the multipath delay spread is employed to determine the optimal width of the integration window of the detector.展开更多
An optical fiber control and transmission module is designed and realized based on Virtex-7 field programmable gata array(FPGA), which can be applied in multi-channel broadband digital receivers. The module consists o...An optical fiber control and transmission module is designed and realized based on Virtex-7 field programmable gata array(FPGA), which can be applied in multi-channel broadband digital receivers. The module consists of sampling data transfer submodule and multi-channel synchronous sampling control submodule. The sampling data transmission in 4× fiber link channel is realized with the self-defined transfer protocol. The measured maximum data rate is 4.97 Gbyte/s. By connecting coherent clocks to the transmitter and receiver endpoints and using the self-defined transfer protocol, multi-channel sampling control signals transferred in optical fibers can be received synchronously by each analog-to-digital converter(ADC) with high accuracy and strong anti-interference ability. The module designed in this paper has certain reference value in increasing the transmission bandwidth and the synchronous sampling accuracy of multi-channel broadband digital receivers.展开更多
文摘The schemes and effects of electronically jamming GPS’s C/A code receivers are studied by using CW as the narrow band jamming signal and BPSK signal modulated by Gold code which is incoherent to that adopted by GPS as the wide band one. By simulating with Monte Carlo method and programming in Matlab language, the various jamming results in terms of bit error rate under several jamming scenarios are obtained. Through analyzing the simulation results and quantitative dependences of jamming effects on the distance from jammer to GPS receiver and the jammer’s height over ground, it is concluded that jamming with wide band jammer is much more effective than that with narrow band one.
基金Supported by the Guangxi Natural Science Foundation (No.0731025, No.0731026)the Established Project by Guangxi Education Department (No.200808LX117)
文摘The detection performance is evaluated for our proposed analog multiuser receiver in Ultra-WideBand (UWB) transmitted-reference system. In the presence of dense multipath and multi-access signals,the performance analysis is difficult due to the complicated waveform of received impulse. We develop an approach to analyze the steady-state Signal-to-Interference-plus-Noise (SINR) of the detector output. The multipath-spread impulse is fitted to an exponentially decaying profile in the analysis. A closed-form expression of steady-state SINR is further deduced for the proposed Least Minimum Square (LMS) detector. The analysis is validated by simulations in Line-Of-Sight (LOS) and Non-Line-Of-Sight (NLOS) channel respectively. Based on the theoretical results,the multipath delay spread is employed to determine the optimal width of the integration window of the detector.
文摘An optical fiber control and transmission module is designed and realized based on Virtex-7 field programmable gata array(FPGA), which can be applied in multi-channel broadband digital receivers. The module consists of sampling data transfer submodule and multi-channel synchronous sampling control submodule. The sampling data transmission in 4× fiber link channel is realized with the self-defined transfer protocol. The measured maximum data rate is 4.97 Gbyte/s. By connecting coherent clocks to the transmitter and receiver endpoints and using the self-defined transfer protocol, multi-channel sampling control signals transferred in optical fibers can be received synchronously by each analog-to-digital converter(ADC) with high accuracy and strong anti-interference ability. The module designed in this paper has certain reference value in increasing the transmission bandwidth and the synchronous sampling accuracy of multi-channel broadband digital receivers.
